For Turkmenistan, distinguish an Ashgabat receiving site from a Turkmenbashi handover request. Specify whether the quotation should cover the final inland destination.
Send the complete grade and standard edition, dimensions, length or coil form, quantity and unit. Include drawings where connection or cutting tolerances matter. Select a catalogue size for reference, then confirm manufacturing route and acceptance criteria; a catalogue entry does not confirm stock.
Delivery scope
Ask for the proposed transport mode, transfer points and packing arrangements to be stated in the offer. Do not treat a named handover point as confirmation of onward delivery.
Delivered quotation factors
Compare offers on the same product, quantity, packing and delivery basis. Material grade, dimensional tolerances, inspection scope, destination handling and the agreed Incoterms affect the delivered quotation. Confirm the scope and validity of the actual offer rather than treating a reference weight as a transport quotation.
Documents to agree
Agree the required inspection document, heat or batch traceability, packing list and dimensional checks in the enquiry. Ask which documents can be supplied for the proposed material before ordering. A technical standard does not by itself establish destination import compliance.
Cities and receiving details
Ashgabat and Turkmenbashi: allocate quantities to each receiving point if both are needed. Confirm the final address and unloading responsibility for each lot.
Compare product-specific buying requirements below. The quotation and receiving sections above explain the common commercial and delivery scope.Read more
Name the alloy and exact grade: ferromanganese and ferrosilicon need different analyses. State principal element content, carbon and impurity limits, sizing and packing, then agree batch sampling.
Specify diameter, steel grade, hardness requirements and any agreed impact or wear tests. Compare the proposed grinding media against the operating requirement, rather than diameter alone.
State ore form, iron analysis, unwanted elements, size distribution and moisture. Keep the assay method and dry or wet tonnage basis consistent when comparing quotations.
Identify foundry or steelmaking use and the required carbon, silicon, manganese, phosphorus and sulfur analysis. Agree piece form and lot sampling before comparing grade-based offers.
Give thickness, width and sheet length or coil weight, together with grade and surface finish. Define oiling, edge condition and processing scope so finishing extras are comparable.
State plate thickness, width, length, grade and delivery condition. Identify any project-specific impact or ultrasonic inspection requirement and the weight basis used in the quotation.
Distinguish sheet from coil and give gauge, width, cut length or coil weight. Include grade, dimensional tolerances and the required surface condition before comparing processing and material prices.
Specify slab thickness, width, length and heat chemistry for the intended rolling process. Agree surface and internal acceptance requirements; dimensions alone do not define an equivalent slab offer.
State nominal diameter, straight length or coil form, full grade and reference standard. Compare nominal versus weighed mass consistently and identify bundle and certificate requirements.
Give diameter, dimensional tolerance, length and steel grade. Specify heat-treatment and surface condition where relevant, and distinguish theoretical from weighed mass in the offer.
Provide billet cross-section, length and required heat analysis for downstream rolling. Agree casting condition, surface acceptance and heat identification rather than buying by section size alone.
State diameter, grade and downstream use such as drawing, welding or cold forming. Define coil weight and handling dimensions, and identify surface or processing requirements that affect comparability.
Give both equal leg dimensions, thickness, length and grade. Use the linked guide to distinguish geometric weight from the agreed mill-section mass and rolling tolerances.
Specify the complete HEA designation and verify actual depth, flange width and web/flange dimensions. Include connection requirements, length and grade; nominal height alone is insufficient.
Quote the exact HEB section and its own reference mass. Check flange and web requirements against connection drawings and state grade and bar length; an HEA designation is not an equivalent order.
Identify the exact IPE designation, length and material grade. Check the section dimensions and unit-mass reference before comparing offers for frames or fabricated members.
Choose UPN or UE explicitly, then specify height, flange width, web/flange thickness and length. Keep the series-specific reference weight and grade consistent across offers.
State outside diameter, wall thickness, length, grade and manufacturing route. Agree the required inspection document, surface condition and any relevant weld or dimensional checks.
Provide both outside side dimensions, wall thickness, length and grade. Specify manufacturing route and any corner-radius or fit-up requirements important to the fabrication.
Give outside side size, wall thickness, length and grade, together with the applicable manufacturing specification. Compare wall and corner tolerances as well as the agreed mass basis.
Receiving context
Distinguish an Ashgabat site from Turkmenbashi port handover. Turkmenbashi is on the Caspian Sea; transfers and onward transport must be specified rather than assumed.
