Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
EMRA Steel supports sourcing enquiries for Ferro alloys. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Ferro alloys add required elements during steelmaking; specify the exact alloy rather than treating all ferro alloys as interchangeable.Read more
Standards and applicability
Set numeric acceptance limits and sampling for the actual product and lot; these analysis tables identify required enquiry fields, not a universal grade or a declared shipment analysis. State dry/as-received basis, moisture, particle distribution and settlement weighing where applicable. Use the applicable analytical methods agreed in the contract; structural tensile/yield tables do not apply to these feedstocks.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
Mn
%
Agreed in the order
Si
%
Agreed in the order
C
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Particle size
mm
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
Published commercial specification examples, not universal ISO grade limits. Specify the alloy, carbon class, minimum Mn/Si, maximum impurities, size distribution and fines allowance. ISO 5446 covers FeMn, ISO 5447 FeSiMn and ISO 5445 FeSi; select the edition and exact designation in the order. HC/MC/LC mean high/medium/low carbon. FeSi 75 is a nominal trade designation; impurity limits distinguish these examples.
Ferro manganese: HC, MC and LC commercial analyses
Ferro manganese: HC, MC and LC commercial analyses
Grade / commercial type
Mn (%)
Si (%)
C (%)
P (%)
S (%)
HC FeMn 75
≥75
≤1.20
≤7.00
≤0.25
≤0.02
MC FeMn 78 / C1.0
≥78
≤1.00
≤1.00
≤0.20
—
MC FeMn 80 / C0.5
≥80
≤1.00
≤0.50
≤0.20
—
LC FeMn 80 / C0.1
≥80
≤1.00
≤0.10
≤0.10
—
LC FeMn 85 / C0.1
≥85
≤1.00
≤0.10
≤0.10
—
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Silico manganese: 60/14, 65/17 and 68/18
Silico manganese: 60/14, 65/17 and 68/18
Grade / commercial type
Mn (%)
Si (%)
C (%)
P (%)
S (%)
SiMn 60/14
≥60
≥14
≤2.00
≤0.30
≤0.030
SiMn 65/17
≥65
≥17
≤2.00
≤0.30
≤0.030
SiMn 68/18
≥68
≥18
≤2.00
≤0.30
≤0.030
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
FeSi 75: low-aluminium and high-purity examples
FeSi 75: low-aluminium and high-purity examples
Grade / commercial type
Si (%)
Al (%)
Ca (%)
Ti (%)
C (%)
P (%)
S (%)
FeSi 75 — low Al
75–78
≤0.10
≤0.10
≤0.030
≤0.070
≤0.040
≤0.010
FeSi 75 — high purity
75–78
≤0.04
≤0.02
≤0.020
≤0.030
≤0.020
≤0.0030
FeSi 75 — ultra-low Al
75–78
≤0.02
≤0.02
≤0.020
≤0.020
≤0.020
≤0.0010
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Ferro alloys Technical and buying guide
EMRA Steel supports sourcing enquiries for Ferro alloys. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Ferro alloys add required elements during steelmaking; specify the exact alloy rather than treating all ferro alloys as interchangeable.
Specification and dimensions
Specify the following dimensions or analysis details for Ferro alloys: Alloy type, element content, particle size and impurity limits. The examples below are enquiry references, not a confirmed stock range.
Grades and applicable standards
For Ferro alloys, agree the required chemical composition, quality limits, sampling and acceptance criteria with the supplier. Specify any governing material specification; finished structural-steel standards should not be assumed to cover raw materials.
Applications and project requirements
For Ferro alloys, share the intended production process or project specification. Required properties, processing condition, surface acceptance and dimensional tolerances should reflect the actual application. Supply selection should be reviewed against the technical requirements rather than based on dimensions alone.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Ferro alloys Price by Grade: FeMn, SiMn, FeSi
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Ferro alloys FeMn Price per Ton
FeMn: HC FeMn 75: Mn 75 min, Si 1.20 max, C 7.00 max, P 0.25 max, S 0.02 max; MC FeMn 78 / C1.0: Mn 78 min, Si 1.00 max, C 1.00 max, P 0.20 max; MC FeMn 80 / C0.5: Mn 80 min, Si 1.00 max, C 0.50 max, P 0.20 max; LC FeMn 80 / C0.1: Mn 80 min, Si 1.00 max, C 0.10 max, P 0.10 max; LC FeMn 85 / C0.1: Mn 85 min, Si 1.00 max, C 0.10 max, P 0.10 max. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Ferro alloys SiMn Quotation
SiMn: SiMn 60/14: Mn 60 min, Si 14 min, C 2.00 max, P 0.30 max, S 0.030 max; SiMn 65/17: Mn 65 min, Si 17 min, C 2.00 max, P 0.30 max, S 0.030 max; SiMn 68/18: Mn 68 min, Si 18 min, C 2.00 max, P 0.30 max, S 0.030 max. Include packing and loading limits. Quotations are available for UAE.
Buy Ferro alloys FeSi
FeSi: FeSi 75 — low Al: Si 75–78, Al 0.10 max, Ca 0.10 max, Ti 0.030 max, C 0.070 max, P 0.040 max, S 0.010 max; FeSi 75 — high purity: Si 75–78, Al 0.04 max, Ca 0.02 max, Ti 0.020 max, C 0.030 max, P 0.020 max, S 0.0030 max; FeSi 75 — ultra-low Al: Si 75–78, Al 0.02 max, Ca 0.02 max, Ti 0.020 max, C 0.020 max, P 0.020 max, S 0.0010 max. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
Ferro alloys FeMn Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Ferro alloys to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with lump size, analysis and big-bag packing. See the Georgia market guide. Available grades: FeMn, SiMn and FeSi.
Ferro alloys SiMn Price in Georgia
The Ferro alloys price in Georgia depends on grade, quantity and the delivery basis, as well as lump size, analysis and big-bag packing. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Ferro alloys FeSi Price in Tbilisi
For Ferro alloys delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Ferro alloys FeMn Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Ferro alloys to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with lump size, analysis and big-bag packing. See the UAE market guide. Available grades: FeMn, SiMn and FeSi.
Ferro alloys SiMn Price in UAE
The Ferro alloys price in the UAE depends on grade, quantity and the delivery basis, as well as lump size, analysis and big-bag packing. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Ferro alloys FeSi Price in Dubai
For Ferro alloys delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Ferro alloys: Price and Quotation by Destination
EMRA Steel quotes Ferro alloys for nine destination markets. Each offer states grade or analysis, packing, cargo form and whether the price is port-based or delivered to a named city.
Ferro alloys FeSi Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Ferro alloys in your request.
Ferro alloys Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Ferro alloys price.
Buy Ferro alloys via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Ferro alloys basis next to a delivered one.
Request Ferro alloys Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Ferro alloys in your request.
Request Ferro alloys Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Ferro alloys tonnage.
Ferro alloys Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Ferro alloys tonnage.
Request Ferro alloys via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Ferro alloys request.
Ferro alloys FeSi Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Ferro alloys.
Ferro alloys Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Ferro alloys tonnage.
Request Ferro alloys via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Ferro alloys request.
Ferro alloys FeMn Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Ferro alloys.
Buy Ferro alloys in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Ferro alloys price.
Buy Ferro alloys via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Ferro alloys request.
Ferro alloys FeMn Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Ferro alloys.
Ferro alloys Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Ferro alloys price.
Ferro alloys Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Ferro alloys basis next to a delivered one.
Request Ferro alloys Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Ferro alloys in your request.
Request Ferro alloys Offer for Tbilisi
Tbilisi enquiries go to our head office, so packing, loading and cargo documents can be agreed directly. Send the receiving address with your Ferro alloys tonnage.
Ferro alloys Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Ferro alloys tonnage.
Buy Ferro alloys via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Ferro alloys request.
Ferro alloys Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Ferro alloys request.
Ferro alloys SiMn Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Ferro alloys in your request.
Ferro alloys Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Ferro alloys tonnage.
Ferro alloys FeMn Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Ferro alloys in your request.
Buy Ferro alloys in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Ferro alloys price.
Ferro alloys SiMn Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Ferro alloys.
Ferro alloys Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Ferro alloys price.
Request Ferro alloys Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Ferro alloys tonnage.
Ferro alloys Prices and quotation requirements
Silicomanganese (FeSiMn)
For Ferro alloys with the specification FeSiMn, provide grade or analysis requirements, dimensions, quantity and delivery destination. Confirm inspection documents and packaging requirements. EMRA Steel reviews supply options before confirming pricing, lead time and commercial terms. Silicomanganese (FeSiMn)
Ferromanganese (FeMn)
For Ferro alloys with the specification FeMn, provide grade or analysis requirements, dimensions, quantity and delivery destination. Confirm inspection documents and packaging requirements. EMRA Steel reviews supply options before confirming pricing, lead time and commercial terms. Ferromanganese (FeMn)
Ferro alloys chemical analysis price enquiry
For Ferro alloys with the specification chemical analysis, provide grade or analysis requirements, dimensions, quantity and delivery destination. Confirm inspection documents and packaging requirements. EMRA Steel reviews supply options before confirming pricing, lead time and commercial terms.
Frequently asked questions
Does an example mean immediate availability?
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Can a different grade or standard be substituted?
Only after the proposed material and the project requirements have been technically reviewed.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Specification enquiries for Ferro alloys
Ferro alloys FeSiMn
For Ferro alloys FeSiMn, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
Ferro alloys FeMn
For Ferro alloys FeMn, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
