Review Hot-rolled steel billet for the 130 × 130 mm (130x130) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Requested specification: 130 × 130 mm. Confirm dimensional tolerances, material analysis, processing condition and packing for the intended application. Listed examples are enquiry references and require supply confirmation.
Hot-rolled steel billet 130 × 130 mm Technical and buying guide
Long Products · EMRA Steel
Review Hot-rolled steel billet for the 130 × 130 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Specify the cast cross-section and cut length, full heat chemistry, deoxidation, surface acceptance, internal soundness and downstream rolling route. Finished EN 10025 mechanical values cannot certify an unrolled billet or slab. For 3SP/5SP requests, provide the complete GOST or other agreed specification and edition; no universal numerical chemistry is assigned from a short commercial name.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
C
%
Agreed in the order
Mn
%
Agreed in the order
Si
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Cr
%
Agreed in the order
Ni
%
Agreed in the order
Cu
%
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
3SP and 5SP · GOST 380-2005 ladle analysis
3SP and 5SP refer here to fully killed Ст3сп and Ст5сп. These chemistry references support billet/slab enquiries; casting quality, residual elements, steelmaking-route exceptions and the downstream product standard remain separate order requirements. Finished rolled-steel mechanical properties do not certify an as-cast billet or slab.
3SP and 5SP · GOST 380-2005 ladle analysis
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
3SP / Ст3сп
0.14–0.22
0.40–0.65
0.15–0.30
≤0.040
≤0.050
5SP / Ст5сп
0.28–0.37
0.50–0.80
0.15–0.30
≤0.040
≤0.050
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Requested minimum manganese: 0.50% and 0.60%
Mn +0.50 and Mn +0.60 mean Mn ≥0.50% and Mn ≥0.60%. The table intersects each buyer minimum with the grade range. They are optional purchase limits, not new standard grade names. St52-3 has a maximum Mn limit in the reference below; a minimum of 0.50% or 0.60% requires separate mill agreement.
Requested minimum manganese: 0.50% and 0.60%
Grade / commercial type
Buyer requirement
Compatible Mn range (%)
3SP
Mn ≥0.50%
0.50–0.65
3SP
Mn ≥0.60%
0.60–0.65
5SP
Mn ≥0.50%
0.50–0.80
5SP
Mn ≥0.60%
0.60–0.80
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Hot-rolled steel billet 130 × 130 mm
Requested specification: 130 × 130 mm. Confirm dimensional tolerances, material analysis, processing condition and packing for the intended application. Listed examples are enquiry references and require supply confirmation.
Steel Billet 130 × 130 mm Price by Grade: 3SP, 5SP, St37, St44, St52
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
3SP / Ст3сп (GOST 380-2005): C 0.14–0.22, Mn 0.40–0.65, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.65; Mn 0.60 %: 0.60–0.65. Include bundle and loading limits. Quotations are available for Qatar.
Buy Steel Billet 130 × 130 mm 5SP / Ст5сп
Reference values for 5SP / Ст5сп (GOST 380-2005): C 0.28–0.37, Mn 0.50–0.80, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.80; Mn 0.60 %: 0.60–0.80. Name the standard and edition in the enquiry. It can be quoted for Kuwait buyers.
Steel Billet 130 × 130 mm St37, St44, St52 Price per Ton
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Send tonnage and length for a price. Enquiries from Armenia are quoted on a stated delivery basis.
Choosing this specification
For 130 × 130 mm, check the receiving mill’s entry dimensions, reheating route and required finished product. The cross-section alone does not establish rolling yield or grade suitability; confirm length, chemistry and surface acceptance. At nominal geometry and 7850 kg/m³ steel density, the reference is 132.665 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 125 × 125 mm, the nominal geometric reference is 8.2% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Where a GOST 380 grade is requested, confirm its full designation and the agreed chemical requirements. Do not assume equivalence to an EN structural steel grade. EN 10025-2 concerns finished structural steel delivery requirements and should not be used alone as a complete billet casting and acceptance specification. Agree surface acceptance, dimensions, traceability and inspection documents for the billet order.
Steel Billet 130 × 130 mm St44 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Steel Billet 130 × 130 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with cross-section, billet length and heat analysis. See the Georgia market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Billet 130 × 130 mm St52 Price in Georgia
The Steel Billet 130 × 130 mm price in Georgia depends on grade, quantity and the delivery basis, as well as cross-section, billet length and heat analysis. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Steel Billet 130 × 130 mm 3SP Price in Tbilisi
For Steel Billet 130 × 130 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Steel Billet 130 × 130 mm 5SP Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Steel Billet 130 × 130 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with cross-section, billet length and heat analysis. See the UAE market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Billet 130 × 130 mm St37 Price in UAE
The Steel Billet 130 × 130 mm price in the UAE depends on grade, quantity and the delivery basis, as well as cross-section, billet length and heat analysis. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Steel Billet 130 × 130 mm St44 Price in Dubai
For Steel Billet 130 × 130 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Steel Billet 130 × 130 mm: Price and Quotation by Destination
Steel Billet 130 × 130 mm weighs 132.665 kg/m on the page reference. Send grade, tonnage and length, and name the city or port you want the price for.
Steel Billet 130 × 130 mm St44 Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Steel Billet 130 × 130 mm in your request.
Request Steel Billet 130 × 130 mm Offer for Baku
Baku offers fix the handover point and customs scope before the price. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Steel Billet 130 × 130 mm St52 Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Steel Billet 130 × 130 mm.
Steel Billet 130 × 130 mm Quotation for Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Buy Steel Billet 130 × 130 mm in Bukhara
Bukhara offers state the inland distance and transit steps first. Name the unloading equipment when you ask for the Steel Billet 130 × 130 mm price.
Steel Billet 130 × 130 mm St44 Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Send tonnage, grade and the delivery point for Steel Billet 130 × 130 mm.
Buy Steel Billet 130 × 130 mm in Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Name the unloading equipment when you ask for the Steel Billet 130 × 130 mm price.
Buy Steel Billet 130 × 130 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Name the terminal and discharge terms in your Steel Billet 130 × 130 mm request.
Steel Billet 130 × 130 mm Price in UAE
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for Steel Billet 130 × 130 mm.
Steel Billet 130 × 130 mm Price in Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Name the unloading equipment when you ask for the Steel Billet 130 × 130 mm price.
Request Steel Billet 130 × 130 mm Offer for Sharjah
Sharjah uses the same specification, with the trucking scope stated. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Request Steel Billet 130 × 130 mm via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Ask for a port-based Steel Billet 130 × 130 mm basis next to a delivered one.
Steel Billet 130 × 130 mm 3SP Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for Steel Billet 130 × 130 mm in your request.
Request Steel Billet 130 × 130 mm Offer for Doha
Doha offers depend on the documents the buyer lists. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Request Steel Billet 130 × 130 mm via Hamad Port
A Hamad Port price separates port charges from the steel price. Ask for a port-based Steel Billet 130 × 130 mm basis next to a delivered one.
Steel Billet 130 × 130 mm 5SP Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Name the grade and tonnage for Steel Billet 130 × 130 mm in your request.
Steel Billet 130 × 130 mm Quotation for Muscat
For Muscat the delivery basis comes first in the quotation. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Buy Steel Billet 130 × 130 mm via Sohar
Sohar cargo is quoted with port handover. Name the terminal and discharge terms in your Steel Billet 130 × 130 mm request.
Steel Billet 130 × 130 mm St52 Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Name the grade and tonnage for Steel Billet 130 × 130 mm in your request.
Buy Steel Billet 130 × 130 mm in Kuwait City
Kuwait City offers state the yard handling limits for long lengths. Name the unloading equipment when you ask for the Steel Billet 130 × 130 mm price.
Steel Billet 130 × 130 mm Price via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Name the terminal and discharge terms in your Steel Billet 130 × 130 mm request.
Steel Billet 130 × 130 mm Price in Georgia
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for Steel Billet 130 × 130 mm.
Steel Billet 130 × 130 mm Price in Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Name the unloading equipment when you ask for the Steel Billet 130 × 130 mm price.
Request Steel Billet 130 × 130 mm Offer for Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Buy Steel Billet 130 × 130 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of long lengths. Ask for a port-based Steel Billet 130 × 130 mm basis next to a delivered one.
Steel Billet 130 × 130 mm Price via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Name the terminal and discharge terms in your Steel Billet 130 × 130 mm request.
Steel Billet 130 × 130 mm St37 Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Send tonnage, grade and the delivery point for Steel Billet 130 × 130 mm.
Request Steel Billet 130 × 130 mm Offer for Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Send the receiving address with your Steel Billet 130 × 130 mm tonnage.
Buying Hot-rolled steel billet 130 × 130 mm and requesting a price
The price for Hot-rolled steel billet 130 × 130 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Hot-rolled steel billet 130 × 130 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Hot-rolled steel billet 130 × 130 mm
Include Hot-rolled steel billet 130 × 130 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Hot-rolled steel billet 130 × 130 mm
Hot-rolled steel billet 130 × 130 mm 3SP
For Hot-rolled steel billet 130 × 130 mm 3SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled steel billet 130 × 130 mm 5SP
For Hot-rolled steel billet 130 × 130 mm 5SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
