Review Hot-rolled steel billet for the 200 × 200 mm (200x200) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Requested specification: 200 × 200 mm. Confirm dimensional tolerances, material analysis, processing condition and packing for the intended application. Listed examples are enquiry references and require supply confirmation.
Hot-rolled steel billet 200 × 200 mm Technical and buying guide
Long Products · EMRA Steel
Review Hot-rolled steel billet for the 200 × 200 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Specify the cast cross-section and cut length, full heat chemistry, deoxidation, surface acceptance, internal soundness and downstream rolling route. Finished EN 10025 mechanical values cannot certify an unrolled billet or slab. For 3SP/5SP requests, provide the complete GOST or other agreed specification and edition; no universal numerical chemistry is assigned from a short commercial name.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
C
%
Agreed in the order
Mn
%
Agreed in the order
Si
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Cr
%
Agreed in the order
Ni
%
Agreed in the order
Cu
%
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
3SP and 5SP · GOST 380-2005 ladle analysis
3SP and 5SP refer here to fully killed Ст3сп and Ст5сп. These chemistry references support billet/slab enquiries; casting quality, residual elements, steelmaking-route exceptions and the downstream product standard remain separate order requirements. Finished rolled-steel mechanical properties do not certify an as-cast billet or slab.
3SP and 5SP · GOST 380-2005 ladle analysis
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
3SP / Ст3сп
0.14–0.22
0.40–0.65
0.15–0.30
≤0.040
≤0.050
5SP / Ст5сп
0.28–0.37
0.50–0.80
0.15–0.30
≤0.040
≤0.050
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Requested minimum manganese: 0.50% and 0.60%
Mn +0.50 and Mn +0.60 mean Mn ≥0.50% and Mn ≥0.60%. The table intersects each buyer minimum with the grade range. They are optional purchase limits, not new standard grade names. St52-3 has a maximum Mn limit in the reference below; a minimum of 0.50% or 0.60% requires separate mill agreement.
Requested minimum manganese: 0.50% and 0.60%
Grade / commercial type
Buyer requirement
Compatible Mn range (%)
3SP
Mn ≥0.50%
0.50–0.65
3SP
Mn ≥0.60%
0.60–0.65
5SP
Mn ≥0.50%
0.50–0.80
5SP
Mn ≥0.60%
0.60–0.80
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Hot-rolled steel billet 200 × 200 mm
Requested specification: 200 × 200 mm. Confirm dimensional tolerances, material analysis, processing condition and packing for the intended application. Listed examples are enquiry references and require supply confirmation.
Steel Billet 200 × 200 mm Price by Grade: 3SP, 5SP, St37, St44, St52
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
Steel Billet 200 × 200 mm 3SP / Ст3сп Price per Ton
3SP / Ст3сп (GOST 380-2005): C 0.14–0.22, Mn 0.40–0.65, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.65; Mn 0.60 %: 0.60–0.65. Send tonnage and length for a price. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Reference values for 5SP / Ст5сп (GOST 380-2005): C 0.28–0.37, Mn 0.50–0.80, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.80; Mn 0.60 %: 0.60–0.80. State tonnage and the receiving city or port. Quotations are available for UAE.
Buy Steel Billet 200 × 200 mm St37, St44, St52
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Include bundle and loading limits. It can be quoted for Oman buyers.
Choosing this specification
For 200 × 200 mm, check the receiving mill’s entry dimensions, reheating route and required finished product. The cross-section alone does not establish rolling yield or grade suitability; confirm length, chemistry and surface acceptance. At nominal geometry and 7850 kg/m³ steel density, the reference is 314.000 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 150 × 150 mm, the nominal geometric reference is 77.8% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Where a GOST 380 grade is requested, confirm its full designation and the agreed chemical requirements. Do not assume equivalence to an EN structural steel grade. EN 10025-2 concerns finished structural steel delivery requirements and should not be used alone as a complete billet casting and acceptance specification. Agree surface acceptance, dimensions, traceability and inspection documents for the billet order.
Steel Billet 200 × 200 mm 3SP Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Steel Billet 200 × 200 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with cross-section, billet length and heat analysis. See the Georgia market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Billet 200 × 200 mm 5SP Price in Georgia
The Steel Billet 200 × 200 mm price in Georgia depends on grade, quantity and the delivery basis, as well as cross-section, billet length and heat analysis. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Steel Billet 200 × 200 mm St37 Price in Tbilisi
For Steel Billet 200 × 200 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Steel Billet 200 × 200 mm St44 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Steel Billet 200 × 200 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with cross-section, billet length and heat analysis. See the UAE market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Billet 200 × 200 mm St52 Price in UAE
The Steel Billet 200 × 200 mm price in the UAE depends on grade, quantity and the delivery basis, as well as cross-section, billet length and heat analysis. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Steel Billet 200 × 200 mm 3SP Price in Dubai
For Steel Billet 200 × 200 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Steel Billet 200 × 200 mm: Price and Quotation by Destination
Steel Billet 200 × 200 mm weighs 314.000 kg/m on the page reference. Send grade, tonnage and length, and name the city or port you want the price for.
Steel Billet 200 × 200 mm 5SP Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and length together with the rail or road leg. See the Uzbekistan destination guide. Send tonnage, grade and the delivery point for Steel Billet 200 × 200 mm.
Buy Steel Billet 200 × 200 mm in Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for 12 m lengths. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Steel Billet 200 × 200 mm Price in Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Steel Billet 200 × 200 mm 3SP Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Send tonnage, grade and the delivery point for Steel Billet 200 × 200 mm.
Steel Billet 200 × 200 mm Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Steel Billet 200 × 200 mm Price via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Steel Billet 200 × 200 mm basis next to a delivered one.
Request Steel Billet 200 × 200 mm Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Steel Billet 200 × 200 mm in your request.
Request Steel Billet 200 × 200 mm Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Steel Billet 200 × 200 mm Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Buy Steel Billet 200 × 200 mm via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Steel Billet 200 × 200 mm request.
Steel Billet 200 × 200 mm St37 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Name the grade and tonnage for Steel Billet 200 × 200 mm in your request.
Steel Billet 200 × 200 mm Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Buy Steel Billet 200 × 200 mm via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Steel Billet 200 × 200 mm request.
Steel Billet 200 × 200 mm St44 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Name the grade and tonnage for Steel Billet 200 × 200 mm in your request.
Buy Steel Billet 200 × 200 mm in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Steel Billet 200 × 200 mm Price via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Steel Billet 200 × 200 mm request.
Steel Billet 200 × 200 mm 5SP Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Steel Billet 200 × 200 mm.
Steel Billet 200 × 200 mm Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Request Steel Billet 200 × 200 mm via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Steel Billet 200 × 200 mm basis next to a delivered one.
Request Steel Billet 200 × 200 mm Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Send tonnage, grade and the delivery point for Steel Billet 200 × 200 mm.
Request Steel Billet 200 × 200 mm Offer for Tbilisi
Tbilisi enquiries go to our head office, so lengths, bundling and loading can be agreed directly. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Steel Billet 200 × 200 mm Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Steel Billet 200 × 200 mm Price via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Steel Billet 200 × 200 mm request.
Request Steel Billet 200 × 200 mm via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Steel Billet 200 × 200 mm request.
Steel Billet 200 × 200 mm St52 Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Send tonnage, grade and the delivery point for Steel Billet 200 × 200 mm.
Steel Billet 200 × 200 mm Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Steel Billet 200 × 200 mm tonnage.
Steel Billet 200 × 200 mm 3SP Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Steel Billet 200 × 200 mm in your request.
Buy Steel Billet 200 × 200 mm in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Steel Billet 200 × 200 mm price.
Buying Hot-rolled steel billet 200 × 200 mm and requesting a price
The price for Hot-rolled steel billet 200 × 200 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Hot-rolled steel billet 200 × 200 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Hot-rolled steel billet 200 × 200 mm
Include Hot-rolled steel billet 200 × 200 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Hot-rolled steel billet 200 × 200 mm
Hot-rolled steel billet 200 × 200 mm 3SP
For Hot-rolled steel billet 200 × 200 mm 3SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled steel billet 200 × 200 mm 5SP
For Hot-rolled steel billet 200 × 200 mm 5SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
