Review Circular hollow sections for the Ø 114.3 × 6 mm (114.3x6) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Ø 114.3 × 6 mm: outside diameter 114.3 mm and nominal wall thickness 6 mm. Reference mass approximately 16 kg/m (EN 10219 reference geometry); calculated weights are 96 kg for 6 m and 192 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Ø 114.3 × 6 mm
Circular hollow sections Ø 114.3 × 6 mm Technical and buying guide
EMRA Steel
Review Circular hollow sections for the Ø 114.3 × 6 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Keep EN 10219 cold-formed welded and EN 10210 hot-finished routes separate. Numeric S355J2H rows below are EN 10219 references for t ≤ 16 mm, not automatic EN 10210 or S355NH data. The tensile band changes below 3 mm. Elongation is reduced from 20% to 18% where D/t < 15 for CHS or (B+H)/(2t) < 12.5 for RHS/SHS; below 3 mm confirm gauge length and specimen width. The 27 J at −20°C reference requires the applicable impact-testing and subsize rules. Confirm grade, wall, corner geometry, weld inspection and certificate for the actual route.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S355J2H
EN 10219; 3 ≤ t ≤ 16 mm
≥355
470–630
20 / 18*
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S355J2H
EN 10219; t ≤ 16 mm
≤0.22
≤1.60
≤0.55
≤0.030
≤0.030
CEV ≤0.45
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Size specifications: Circular hollow sections Ø 114.3 × 6 mm
Ø 114.3 × 6 mm: outside diameter 114.3 mm and nominal wall thickness 6 mm. Reference mass approximately 16 kg/m (EN 10219 reference geometry); calculated weights are 96 kg for 6 m and 192 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Ø 114.3 × 6 mm
CHS Ø 114.3 × 6 mm Price by Grade: S355J2H
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
Request CHS Ø 114.3 × 6 mm S355J2H Quotation
S355J2H to EN 10219 limits C 0.22 max, Mn 1.60 max, Si 0.55 max, P and S 0.030 max and CEV 0.45 max. Include bundle and loading limits. Quotations are available for Qatar.
Buy CHS Ø 114.3 × 6 mm S355J2H
S355J2H carries a 355 MPa minimum yield and 470–630 MPa tensile strength for 3 ≤ t ≤ 16 mm wall thickness. Name the standard and edition in the enquiry. It can be quoted for Kuwait buyers.
CHS Ø 114.3 × 6 mm S355J2H Price per Ton
S355J2H is quoted with a 27 J impact reference at −20°C; state wall thickness and any test certificate you need. Send tonnage and length for a price. Enquiries from Armenia are quoted on a stated delivery basis.
Choosing this specification
For Ø 114.3 × 6 mm, check outside dimensions, wall thickness, corner geometry and end preparation against the fabrication drawing. Connection fit and section properties require the exact profile; nominal envelope dimensions alone are insufficient. At nominal geometry and 7850 kg/m³ steel density, the reference is 16.025 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with Ø 139.7 × 4 mm, the nominal geometric reference is 19.7% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
CHS Ø 114.3 × 6 mm S355J2H Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies CHS Ø 114.3 × 6 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the Georgia market guide.
CHS Ø 114.3 × 6 mm Price in Georgia
The CHS Ø 114.3 × 6 mm price in Georgia depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
CHS Ø 114.3 × 6 mm Price in Tbilisi
For CHS Ø 114.3 × 6 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
CHS Ø 114.3 × 6 mm S355J2H Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies CHS Ø 114.3 × 6 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the UAE market guide.
CHS Ø 114.3 × 6 mm Price in UAE
The CHS Ø 114.3 × 6 mm price in the UAE depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
CHS Ø 114.3 × 6 mm Price in Dubai
For CHS Ø 114.3 × 6 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy CHS Ø 114.3 × 6 mm: Price and Quotation by Destination
CHS Ø 114.3 × 6 mm weighs 16.000 kg/m; a 12 m length is 192.00 kg on that basis. Send grade, tonnage and length, and name the city or port you want the price for.
CHS Ø 114.3 × 6 mm Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for CHS Ø 114.3 × 6 mm in your request.
Request CHS Ø 114.3 × 6 mm Offer for Baku
Baku offers fix the handover point and customs scope before the price. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
CHS Ø 114.3 × 6 mm Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for CHS Ø 114.3 × 6 mm.
CHS Ø 114.3 × 6 mm Quotation for Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Buy CHS Ø 114.3 × 6 mm in Bukhara
Bukhara offers state the inland distance and transit steps first. Name the unloading equipment when you ask for the CHS Ø 114.3 × 6 mm price.
CHS Ø 114.3 × 6 mm Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Send tonnage, grade and the delivery point for CHS Ø 114.3 × 6 mm.
Buy CHS Ø 114.3 × 6 mm in Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Name the unloading equipment when you ask for the CHS Ø 114.3 × 6 mm price.
Buy CHS Ø 114.3 × 6 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Name the terminal and discharge terms in your CHS Ø 114.3 × 6 mm request.
CHS Ø 114.3 × 6 mm Price in UAE
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for CHS Ø 114.3 × 6 mm.
CHS Ø 114.3 × 6 mm Price in Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Name the unloading equipment when you ask for the CHS Ø 114.3 × 6 mm price.
Request CHS Ø 114.3 × 6 mm Offer for Sharjah
Sharjah uses the same specification, with the trucking scope stated. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Request CHS Ø 114.3 × 6 mm via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Ask for a port-based CHS Ø 114.3 × 6 mm basis next to a delivered one.
CHS Ø 114.3 × 6 mm Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for CHS Ø 114.3 × 6 mm in your request.
Request CHS Ø 114.3 × 6 mm Offer for Doha
Doha offers depend on the documents the buyer lists. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Request CHS Ø 114.3 × 6 mm via Hamad Port
A Hamad Port price separates port charges from the steel price. Ask for a port-based CHS Ø 114.3 × 6 mm basis next to a delivered one.
CHS Ø 114.3 × 6 mm Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Name the grade and tonnage for CHS Ø 114.3 × 6 mm in your request.
CHS Ø 114.3 × 6 mm Quotation for Muscat
For Muscat the delivery basis comes first in the quotation. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Buy CHS Ø 114.3 × 6 mm via Sohar
Sohar cargo is quoted with port handover. Name the terminal and discharge terms in your CHS Ø 114.3 × 6 mm request.
CHS Ø 114.3 × 6 mm Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Name the grade and tonnage for CHS Ø 114.3 × 6 mm in your request.
Buy CHS Ø 114.3 × 6 mm in Kuwait City
Kuwait City offers state the yard handling limits for long lengths. Name the unloading equipment when you ask for the CHS Ø 114.3 × 6 mm price.
CHS Ø 114.3 × 6 mm Price via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Name the terminal and discharge terms in your CHS Ø 114.3 × 6 mm request.
CHS Ø 114.3 × 6 mm Price in Georgia
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for CHS Ø 114.3 × 6 mm.
CHS Ø 114.3 × 6 mm Price in Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Name the unloading equipment when you ask for the CHS Ø 114.3 × 6 mm price.
Request CHS Ø 114.3 × 6 mm Offer for Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Buy CHS Ø 114.3 × 6 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of long lengths. Ask for a port-based CHS Ø 114.3 × 6 mm basis next to a delivered one.
CHS Ø 114.3 × 6 mm Price via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Name the terminal and discharge terms in your CHS Ø 114.3 × 6 mm request.
CHS Ø 114.3 × 6 mm Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Send tonnage, grade and the delivery point for CHS Ø 114.3 × 6 mm.
Request CHS Ø 114.3 × 6 mm Offer for Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Send the receiving address with your CHS Ø 114.3 × 6 mm tonnage.
Buying Circular hollow sections Ø 114.3 × 6 mm and requesting a price
The price for Circular hollow sections Ø 114.3 × 6 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Circular hollow sections Ø 114.3 × 6 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Circular hollow sections Ø 114.3 × 6 mm
Include Circular hollow sections Ø 114.3 × 6 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Circular hollow sections Ø 114.3 × 6 mm
Circular hollow sections Ø 114.3 × 6 mm S355J2H
For Circular hollow sections Ø 114.3 × 6 mm S355J2H, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Circular hollow sections Ø 114.3 × 6 mm S355NH
For Circular hollow sections Ø 114.3 × 6 mm S355NH, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
