Rectangular hollow sections have unequal side dimensions; specify both sides and wall thickness for fabrication or structural enquiries.
EMRA Steel supports sourcing enquiries for Rectangular hollow sections. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Get a quote ↗Talk to the EMRA Steel team about your requirements.
Rectangular hollow sections have unequal side dimensions; specify both sides and wall thickness for fabrication or structural enquiries.
EMRA Steel supports sourcing enquiries for Rectangular hollow sections. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Rectangular hollow sections have unequal side dimensions; specify both sides and wall thickness for fabrication or structural enquiries.
Specify the following dimensions or analysis details for Rectangular hollow sections: Outside diameter × wall thickness × length for circular sections; width × height × wall thickness × length for rectangular sections.. The examples below are enquiry references, not a confirmed stock range.
The square and rectangular weights below use cold-formed welded EN 10219 reference geometry. EN 10219-1 covers technical delivery requirements and EN 10219-2 dimensions and tolerances. Specify the full grade, such as S355J2H, and required inspection documents. Hot-finished EN 10210 sections require their own agreed section table: corner radii and mass can differ at the same outside dimensions and thickness. Confirm surface condition, corner geometry, seam location and fabrication requirements.
For Rectangular hollow sections, share the intended production process or project specification. Required properties, processing condition, surface acceptance and dimensional tolerances should reflect the actual application. Supply selection should be reviewed against the technical requirements rather than based on dimensions alone.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
50 × 30 × 2 mm: outside height 50 mm, outside width 30 mm and nominal wall thickness 2 mm. Reference mass approximately 2.31 kg/m (EN 10219 reference geometry); calculated weights are 13.86 kg for 6 m and 27.72 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
50 × 30 × 3 mm: outside height 50 mm, outside width 30 mm and nominal wall thickness 3 mm. Reference mass approximately 3.3 kg/m (EN 10219 reference geometry); calculated weights are 19.8 kg for 6 m and 39.6 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
60 × 40 × 2 mm: outside height 60 mm, outside width 40 mm and nominal wall thickness 2 mm. Reference mass approximately 2.93 kg/m (EN 10219 reference geometry); calculated weights are 17.58 kg for 6 m and 35.16 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
60 × 40 × 3 mm: outside height 60 mm, outside width 40 mm and nominal wall thickness 3 mm. Reference mass approximately 4.25 kg/m (EN 10219 reference geometry); calculated weights are 25.5 kg for 6 m and 51 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
80 × 40 × 2 mm: outside height 80 mm, outside width 40 mm and nominal wall thickness 2 mm. Reference mass approximately 3.56 kg/m (EN 10219 reference geometry); calculated weights are 21.36 kg for 6 m and 42.72 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
80 × 40 × 3 mm: outside height 80 mm, outside width 40 mm and nominal wall thickness 3 mm. Reference mass approximately 5.19 kg/m (EN 10219 reference geometry); calculated weights are 31.14 kg for 6 m and 62.28 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
80 × 60 × 3 mm: outside height 80 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 6.13 kg/m (EN 10219 reference geometry); calculated weights are 36.78 kg for 6 m and 73.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
100 × 50 × 3 mm: outside height 100 mm, outside width 50 mm and nominal wall thickness 3 mm. Reference mass approximately 6.6 kg/m (EN 10219 reference geometry); calculated weights are 39.6 kg for 6 m and 79.2 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
100 × 50 × 4 mm: outside height 100 mm, outside width 50 mm and nominal wall thickness 4 mm. Reference mass approximately 8.59 kg/m (EN 10219 reference geometry); calculated weights are 51.54 kg for 6 m and 103.08 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
100 × 60 × 3 mm: outside height 100 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 7.07 kg/m (EN 10219 reference geometry); calculated weights are 42.42 kg for 6 m and 84.84 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
100 × 60 × 4 mm: outside height 100 mm, outside width 60 mm and nominal wall thickness 4 mm. Reference mass approximately 9.22 kg/m (EN 10219 reference geometry); calculated weights are 55.32 kg for 6 m and 110.64 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
120 × 60 × 4 mm: outside height 120 mm, outside width 60 mm and nominal wall thickness 4 mm. Reference mass approximately 10.5 kg/m (EN 10219 reference geometry); calculated weights are 63 kg for 6 m and 126 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
120 × 80 × 4 mm: outside height 120 mm, outside width 80 mm and nominal wall thickness 4 mm. Reference mass approximately 11.7 kg/m (EN 10219 reference geometry); calculated weights are 70.2 kg for 6 m and 140.4 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
150 × 100 × 4 mm: outside height 150 mm, outside width 100 mm and nominal wall thickness 4 mm. Reference mass approximately 14.9 kg/m (EN 10219 reference geometry); calculated weights are 89.4 kg for 6 m and 178.8 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
150 × 100 × 6 mm: outside height 150 mm, outside width 100 mm and nominal wall thickness 6 mm. Reference mass approximately 21.7 kg/m (EN 10219 reference geometry); calculated weights are 130.2 kg for 6 m and 260.4 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
200 × 100 × 4 mm: outside height 200 mm, outside width 100 mm and nominal wall thickness 4 mm. Reference mass approximately 18 kg/m (EN 10219 reference geometry); calculated weights are 108 kg for 6 m and 216 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
200 × 100 × 6 mm: outside height 200 mm, outside width 100 mm and nominal wall thickness 6 mm. Reference mass approximately 26.4 kg/m (EN 10219 reference geometry); calculated weights are 158.4 kg for 6 m and 316.8 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
300 × 200 × 8 mm: outside height 300 mm, outside width 200 mm and nominal wall thickness 8 mm. Reference mass approximately 59.1 kg/m (EN 10219 reference geometry); calculated weights are 354.6 kg for 6 m and 709.2 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
For a Rectangular hollow section quotation, state the grade, manufacturing route, full standard, length, quantity, surface finish and delivery destination. Compare matching dimensions and wall thickness; confirm whether pricing and invoicing use theoretical or actual weighed mass. Galvanizing, cutting and end preparation can affect the offer. Get a quote
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Only after the proposed material and the project requirements have been technically reviewed.
