Circular hollow sections are specified by outside diameter, wall thickness, material grade and manufacturing route.
EMRA Steel supports sourcing enquiries for Circular hollow sections. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Get a quote ↗Talk to the EMRA Steel team about your requirements.
Circular hollow sections are specified by outside diameter, wall thickness, material grade and manufacturing route.
EMRA Steel supports sourcing enquiries for Circular hollow sections. Review product dimensions, grades, standards and inspection requirements before requesting a quotation. Confirm quantity, delivery destination and the required schedule with our sales team.
Circular hollow sections are specified by outside diameter, wall thickness, material grade and manufacturing route.
Specify the following dimensions or analysis details for Circular hollow sections: Outside diameter × wall thickness × length for circular sections; width × height × wall thickness × length for rectangular sections.. The examples below are enquiry references, not a confirmed stock range.
For structural circular tubes, specify cold-formed welded EN 10219-1 / EN 10219-2 or hot-finished EN 10210-1 / EN 10210-2. State the full grade, for example S355J2H for an EN 10219 enquiry or S355NH for EN 10210, subject to confirmation. Reference weights below identify their geometry basis. Outside diameter is not the same as nominal pipe size DN. Water, gas or pressure service requires its own applicable pipe standard, testing and approval. Confirm coating, end preparation and inspection documents.
For Circular hollow sections, share the intended production process or project specification. Required properties, processing condition, surface acceptance and dimensional tolerances should reflect the actual application. Supply selection should be reviewed against the technical requirements rather than based on dimensions alone.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Ø 42.4 × 2 mm: outside diameter 42.4 mm and nominal wall thickness 2 mm. Reference mass approximately 1.99 kg/m (EN 10219 reference geometry); calculated weights are 11.94 kg for 6 m and 23.88 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 42.4 × 3 mm: outside diameter 42.4 mm and nominal wall thickness 3 mm. Reference mass approximately 2.91 kg/m (EN 10219 reference geometry); calculated weights are 17.46 kg for 6 m and 34.92 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 48.3 × 2 mm: outside diameter 48.3 mm and nominal wall thickness 2 mm. Reference mass approximately 2.28 kg/m (EN 10219 reference geometry); calculated weights are 13.68 kg for 6 m and 27.36 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 48.3 × 3.2 mm: outside diameter 48.3 mm and nominal wall thickness 3.2 mm. Reference mass approximately 3.56 kg/m (EN 10210 reference geometry); calculated weights are 21.36 kg for 6 m and 42.72 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 48.3 × 4 mm: outside diameter 48.3 mm and nominal wall thickness 4 mm. Reference mass approximately 4.37 kg/m (EN 10219 reference geometry); calculated weights are 26.22 kg for 6 m and 52.44 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 60.3 × 2 mm: outside diameter 60.3 mm and nominal wall thickness 2 mm. Reference mass approximately 2.88 kg/m (EN 10219 reference geometry); calculated weights are 17.28 kg for 6 m and 34.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 60.3 × 3.2 mm: outside diameter 60.3 mm and nominal wall thickness 3.2 mm. Reference mass approximately 4.51 kg/m (EN 10210 reference geometry); calculated weights are 27.06 kg for 6 m and 54.12 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 60.3 × 4 mm: outside diameter 60.3 mm and nominal wall thickness 4 mm. Reference mass approximately 5.55 kg/m (EN 10219 reference geometry); calculated weights are 33.3 kg for 6 m and 66.6 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 76.1 × 3 mm: outside diameter 76.1 mm and nominal wall thickness 3 mm. Reference mass approximately 5.41 kg/m (EN 10219 reference geometry); calculated weights are 32.46 kg for 6 m and 64.92 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 76.1 × 4 mm: outside diameter 76.1 mm and nominal wall thickness 4 mm. Reference mass approximately 7.11 kg/m (EN 10219 reference geometry); calculated weights are 42.66 kg for 6 m and 85.32 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 88.9 × 3 mm: outside diameter 88.9 mm and nominal wall thickness 3 mm. Reference mass approximately 6.36 kg/m (EN 10219 reference geometry); calculated weights are 38.16 kg for 6 m and 76.32 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 88.9 × 4 mm: outside diameter 88.9 mm and nominal wall thickness 4 mm. Reference mass approximately 8.38 kg/m (EN 10219 reference geometry); calculated weights are 50.28 kg for 6 m and 100.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 101.6 × 4 mm: outside diameter 101.6 mm and nominal wall thickness 4 mm. Reference mass approximately 9.63 kg/m (EN 10219 reference geometry); calculated weights are 57.78 kg for 6 m and 115.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 114.3 × 4 mm: outside diameter 114.3 mm and nominal wall thickness 4 mm. Reference mass approximately 10.9 kg/m (EN 10219 reference geometry); calculated weights are 65.4 kg for 6 m and 130.8 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 114.3 × 6 mm: outside diameter 114.3 mm and nominal wall thickness 6 mm. Reference mass approximately 16 kg/m (EN 10219 reference geometry); calculated weights are 96 kg for 6 m and 192 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 139.7 × 4 mm: outside diameter 139.7 mm and nominal wall thickness 4 mm. Reference mass approximately 13.4 kg/m (EN 10219 reference geometry); calculated weights are 80.4 kg for 6 m and 160.8 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 168.3 × 6 mm: outside diameter 168.3 mm and nominal wall thickness 6 mm. Reference mass approximately 24 kg/m (EN 10219 reference geometry); calculated weights are 144 kg for 6 m and 288 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
Ø 219.1 × 6 mm: outside diameter 219.1 mm and nominal wall thickness 6 mm. Reference mass approximately 31.5 kg/m (EN 10219 reference geometry); calculated weights are 189 kg for 6 m and 378 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis.
For a Circular tube quotation, state the grade, manufacturing route, full standard, length, quantity, surface finish and delivery destination. Compare matching dimensions and wall thickness; confirm whether pricing and invoicing use theoretical or actual weighed mass. Galvanizing, cutting and end preparation can affect the offer. Get a quote
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Only after the proposed material and the project requirements have been technically reviewed.
