Review Circular hollow sections for the Ø 88.9 × 4 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Ø 88.9 × 4 mm: outside diameter 88.9 mm and nominal wall thickness 4 mm. Reference mass approximately 8.38 kg/m (EN 10219 reference geometry); calculated weights are 50.28 kg for 6 m and 100.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Circular hollow sections Ø 88.9 × 4 mm
Circular hollow sections Ø 88.9 × 4 mm Technical and buying guide
EMRA Steel
Review Circular hollow sections for the Ø 88.9 × 4 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Read more
Size specifications: Circular hollow sections Ø 88.9 × 4 mm
Ø 88.9 × 4 mm: outside diameter 88.9 mm and nominal wall thickness 4 mm. Reference mass approximately 8.38 kg/m (EN 10219 reference geometry); calculated weights are 50.28 kg for 6 m and 100.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Circular hollow sections Ø 88.9 × 4 mm
Specification and dimensions
Specify the following dimensions or analysis details for Circular hollow sections: Outside diameter × wall thickness × length for circular sections; width × height × wall thickness × length for rectangular sections.. The examples below are enquiry references, not a confirmed stock range.
Grades and applicable standards
For structural circular tubes, specify cold-formed welded EN 10219-1 / EN 10219-2 or hot-finished EN 10210-1 / EN 10210-2. State the full grade, for example S355J2H for an EN 10219 enquiry or S355NH for EN 10210, subject to confirmation. Reference weights below identify their geometry basis. Outside diameter is not the same as nominal pipe size DN. Water, gas or pressure service requires its own applicable pipe standard, testing and approval. Confirm coating, end preparation and inspection documents.
Applications and project requirements
For Circular hollow sections, share the intended production process or project specification. Required properties, processing condition, surface acceptance and dimensional tolerances should reflect the actual application. Supply selection should be reviewed against the technical requirements rather than based on dimensions alone.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Buying Circular hollow sections Ø 88.9 × 4 mm and requesting a price
The price for Circular hollow sections Ø 88.9 × 4 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Circular hollow sections Ø 88.9 × 4 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Circular hollow sections Ø 88.9 × 4 mm
Include Circular hollow sections Ø 88.9 × 4 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
