Review Rectangular hollow sections for the 80 × 60 × 3 mm (80x60x3) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
80 × 60 × 3 mm: outside height 80 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 6.13 kg/m (EN 10219 reference geometry); calculated weights are 36.78 kg for 6 m and 73.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. 80 × 60 × 3 mm
Rectangular hollow sections 80 × 60 × 3 mm Technical and buying guide
EMRA Steel
Review Rectangular hollow sections for the 80 × 60 × 3 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Keep EN 10219 cold-formed welded and EN 10210 hot-finished routes separate. Numeric S355J2H rows below are EN 10219 references for t ≤ 16 mm, not automatic EN 10210 or S355NH data. The tensile band changes below 3 mm. Elongation is reduced from 20% to 18% where D/t < 15 for CHS or (B+H)/(2t) < 12.5 for RHS/SHS; below 3 mm confirm gauge length and specimen width. The 27 J at −20°C reference requires the applicable impact-testing and subsize rules. Confirm grade, wall, corner geometry, weld inspection and certificate for the actual route.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S355J2H
EN 10219; 3 ≤ t ≤ 16 mm
≥355
470–630
20 / 18*
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S355J2H
EN 10219; t ≤ 16 mm
≤0.22
≤1.60
≤0.55
≤0.030
≤0.030
CEV ≤0.45
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
80 × 60 × 3 mm: outside height 80 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 6.13 kg/m (EN 10219 reference geometry); calculated weights are 36.78 kg for 6 m and 73.56 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. 80 × 60 × 3 mm
RHS 80 × 60 × 3 mm Price by Grade: S355J2H
The values below come from this page's reference tables and are not guaranteed; state the standard, grade and wall thickness when you ask for a price.
Request RHS 80 × 60 × 3 mm S355J2H Quotation
Chemistry for S355J2H: C 0.22 max, Mn 1.60 max, Si 0.55 max, P and S 0.030 max, CEV 0.45 max (t ≤ 16 mm). State tonnage and the receiving city or port. Quotations are available for Qatar.
Buy RHS 80 × 60 × 3 mm S355J2H
For 3 ≤ t ≤ 16 mm wall thickness the reference is 355 MPa minimum yield and 470–630 MPa tensile strength. Include bundle and loading limits. It can be quoted for Kuwait buyers.
RHS 80 × 60 × 3 mm S355J2H Price per Ton
Impact reference is 27 J / −20°C: 27 J at −20°C. Confirm wall thickness and test requirements with the grade. Name the standard and edition in the enquiry. Enquiries from Armenia are quoted on a stated delivery basis.
Choosing this specification
For 80 × 60 × 3 mm, check outside dimensions, wall thickness, corner geometry and end preparation against the fabrication drawing. Connection fit and section properties require the exact profile; nominal envelope dimensions alone are insufficient. At nominal geometry and 7850 kg/m³ steel density, the reference is 6.311 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 100 × 50 × 3 mm, the nominal geometric reference is 6.9% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
RHS 80 × 60 × 3 mm S355J2H Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies RHS 80 × 60 × 3 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the Georgia market guide.
RHS 80 × 60 × 3 mm Price in Georgia
The RHS 80 × 60 × 3 mm price in Georgia depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
RHS 80 × 60 × 3 mm Price in Tbilisi
For RHS 80 × 60 × 3 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
RHS 80 × 60 × 3 mm S355J2H Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies RHS 80 × 60 × 3 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the UAE market guide.
RHS 80 × 60 × 3 mm Price in UAE
The RHS 80 × 60 × 3 mm price in the UAE depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
RHS 80 × 60 × 3 mm Price in Dubai
For RHS 80 × 60 × 3 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy RHS 80 × 60 × 3 mm: Price and Quotation by Destination
RHS 80 × 60 × 3 mm weighs 6.130 kg/m; a 12 m length is 73.56 kg on that basis. Send grade, tonnage and length, and name the city or port you want the price for.
RHS 80 × 60 × 3 mm Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for RHS 80 × 60 × 3 mm.
RHS 80 × 60 × 3 mm Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
RHS 80 × 60 × 3 mm Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based RHS 80 × 60 × 3 mm basis next to a delivered one.
Request RHS 80 × 60 × 3 mm Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for RHS 80 × 60 × 3 mm in your request.
Request RHS 80 × 60 × 3 mm Offer for Tbilisi
Tbilisi enquiries go to our head office, so lengths, bundling and loading can be agreed directly. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
RHS 80 × 60 × 3 mm Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
Buy RHS 80 × 60 × 3 mm via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your RHS 80 × 60 × 3 mm request.
RHS 80 × 60 × 3 mm Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your RHS 80 × 60 × 3 mm request.
RHS 80 × 60 × 3 mm Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for RHS 80 × 60 × 3 mm in your request.
RHS 80 × 60 × 3 mm Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
RHS 80 × 60 × 3 mm Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for RHS 80 × 60 × 3 mm in your request.
Buy RHS 80 × 60 × 3 mm in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
RHS 80 × 60 × 3 mm Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for RHS 80 × 60 × 3 mm.
RHS 80 × 60 × 3 mm Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
Request RHS 80 × 60 × 3 mm Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
RHS 80 × 60 × 3 mm Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Send tonnage, grade and the delivery point for RHS 80 × 60 × 3 mm.
Request RHS 80 × 60 × 3 mm Offer for Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
Buy RHS 80 × 60 × 3 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Ask for a port-based RHS 80 × 60 × 3 mm basis next to a delivered one.
RHS 80 × 60 × 3 mm for UAE: Price and Offer
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for RHS 80 × 60 × 3 mm.
RHS 80 × 60 × 3 mm Quotation for Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Send the receiving address with your RHS 80 × 60 × 3 mm tonnage.
Buy RHS 80 × 60 × 3 mm in Sharjah
Sharjah uses the same specification, with the trucking scope stated. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
Request RHS 80 × 60 × 3 mm via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Name the terminal and discharge terms in your RHS 80 × 60 × 3 mm request.
RHS 80 × 60 × 3 mm Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for RHS 80 × 60 × 3 mm in your request.
Buy RHS 80 × 60 × 3 mm in Doha
Doha offers depend on the documents the buyer lists. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
Request RHS 80 × 60 × 3 mm via Hamad Port
A Hamad Port price separates port charges from the steel price. Name the terminal and discharge terms in your RHS 80 × 60 × 3 mm request.
RHS 80 × 60 × 3 mm Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Name the grade and tonnage for RHS 80 × 60 × 3 mm in your request.
RHS 80 × 60 × 3 mm Price in Muscat
For Muscat the delivery basis comes first in the quotation. Name the unloading equipment when you ask for the RHS 80 × 60 × 3 mm price.
Buy RHS 80 × 60 × 3 mm via Sohar
Sohar cargo is quoted with port handover. Ask for a port-based RHS 80 × 60 × 3 mm basis next to a delivered one.
Buying Rectangular hollow sections 80 × 60 × 3 mm and requesting a price
The price for Rectangular hollow sections 80 × 60 × 3 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Rectangular hollow sections 80 × 60 × 3 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Rectangular hollow sections 80 × 60 × 3 mm
Include Rectangular hollow sections 80 × 60 × 3 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Rectangular hollow sections 80 × 60 × 3 mm
Rectangular hollow sections 80 × 60 × 3 mm S355J2H
For Rectangular hollow sections 80 × 60 × 3 mm S355J2H, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
