Review Square hollow sections for the 120 × 120 × 4 mm (120x120x4) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
120 × 120 × 4 mm: outside height 120 mm, outside width 120 mm and nominal wall thickness 4 mm. Reference mass approximately 14.3 kg/m (EN 10219 reference geometry); calculated weights are 85.8 kg for 6 m and 171.6 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. 120 × 120 × 4 mm
Square hollow sections 120 × 120 × 4 mm Technical and buying guide
EMRA Steel
Review Square hollow sections for the 120 × 120 × 4 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Keep EN 10219 cold-formed welded and EN 10210 hot-finished routes separate. Numeric S355J2H rows below are EN 10219 references for t ≤ 16 mm, not automatic EN 10210 or S355NH data. The tensile band changes below 3 mm. Elongation is reduced from 20% to 18% where D/t < 15 for CHS or (B+H)/(2t) < 12.5 for RHS/SHS; below 3 mm confirm gauge length and specimen width. The 27 J at −20°C reference requires the applicable impact-testing and subsize rules. Confirm grade, wall, corner geometry, weld inspection and certificate for the actual route.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S355J2H
EN 10219; 3 ≤ t ≤ 16 mm
≥355
470–630
20 / 18*
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S355J2H
EN 10219; t ≤ 16 mm
≤0.22
≤1.60
≤0.55
≤0.030
≤0.030
CEV ≤0.45
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
120 × 120 × 4 mm: outside height 120 mm, outside width 120 mm and nominal wall thickness 4 mm. Reference mass approximately 14.3 kg/m (EN 10219 reference geometry); calculated weights are 85.8 kg for 6 m and 171.6 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. 120 × 120 × 4 mm
SHS 120 × 120 × 4 mm Price by Grade: S355J2H
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
Request SHS 120 × 120 × 4 mm S355J2H Quotation
S355J2H to EN 10219 limits C 0.22 max, Mn 1.60 max, Si 0.55 max, P and S 0.030 max and CEV 0.45 max. Include bundle and loading limits. Quotations are available for Qatar.
Buy SHS 120 × 120 × 4 mm S355J2H
S355J2H carries a 355 MPa minimum yield and 470–630 MPa tensile strength for 3 ≤ t ≤ 16 mm wall thickness. Name the standard and edition in the enquiry. It can be quoted for Kuwait buyers.
SHS 120 × 120 × 4 mm S355J2H Price per Ton
S355J2H is quoted with a 27 J impact reference at −20°C; state wall thickness and any test certificate you need. Send tonnage and length for a price. Enquiries from Armenia are quoted on a stated delivery basis.
Choosing this specification
For 120 × 120 × 4 mm, check outside dimensions, wall thickness, corner geometry and end preparation against the fabrication drawing. Connection fit and section properties require the exact profile; nominal envelope dimensions alone are insufficient. At nominal geometry and 7850 kg/m³ steel density, the reference is 14.570 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 100 × 100 × 4 mm, the nominal geometric reference is 20.8% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
SHS 120 × 120 × 4 mm S355J2H Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies SHS 120 × 120 × 4 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the Georgia market guide.
SHS 120 × 120 × 4 mm Price in Georgia
The SHS 120 × 120 × 4 mm price in Georgia depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
SHS 120 × 120 × 4 mm Price in Tbilisi
For SHS 120 × 120 × 4 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
SHS 120 × 120 × 4 mm S355J2H Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies SHS 120 × 120 × 4 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with length, wall thickness and bundle packing. See the UAE market guide.
SHS 120 × 120 × 4 mm Price in UAE
The SHS 120 × 120 × 4 mm price in the UAE depends on grade, quantity and the delivery basis, as well as length, wall thickness and bundle packing. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
SHS 120 × 120 × 4 mm Price in Dubai
For SHS 120 × 120 × 4 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy SHS 120 × 120 × 4 mm: Price and Quotation by Destination
SHS 120 × 120 × 4 mm weighs 14.300 kg/m; a 12 m length is 171.60 kg on that basis. Send grade, tonnage and length, and name the city or port you want the price for.
SHS 120 × 120 × 4 mm Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for SHS 120 × 120 × 4 mm in your request.
Request SHS 120 × 120 × 4 mm Offer for Baku
Baku offers fix the handover point and customs scope before the price. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
SHS 120 × 120 × 4 mm Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for SHS 120 × 120 × 4 mm.
SHS 120 × 120 × 4 mm Quotation for Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Buy SHS 120 × 120 × 4 mm in Bukhara
Bukhara offers state the inland distance and transit steps first. Name the unloading equipment when you ask for the SHS 120 × 120 × 4 mm price.
SHS 120 × 120 × 4 mm Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Send tonnage, grade and the delivery point for SHS 120 × 120 × 4 mm.
Buy SHS 120 × 120 × 4 mm in Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Name the unloading equipment when you ask for the SHS 120 × 120 × 4 mm price.
Buy SHS 120 × 120 × 4 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Name the terminal and discharge terms in your SHS 120 × 120 × 4 mm request.
SHS 120 × 120 × 4 mm Price in UAE
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for SHS 120 × 120 × 4 mm.
SHS 120 × 120 × 4 mm Price in Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Name the unloading equipment when you ask for the SHS 120 × 120 × 4 mm price.
Request SHS 120 × 120 × 4 mm Offer for Sharjah
Sharjah uses the same specification, with the trucking scope stated. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Request SHS 120 × 120 × 4 mm via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Ask for a port-based SHS 120 × 120 × 4 mm basis next to a delivered one.
SHS 120 × 120 × 4 mm Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for SHS 120 × 120 × 4 mm in your request.
Request SHS 120 × 120 × 4 mm Offer for Doha
Doha offers depend on the documents the buyer lists. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Request SHS 120 × 120 × 4 mm via Hamad Port
A Hamad Port price separates port charges from the steel price. Ask for a port-based SHS 120 × 120 × 4 mm basis next to a delivered one.
SHS 120 × 120 × 4 mm Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Name the grade and tonnage for SHS 120 × 120 × 4 mm in your request.
SHS 120 × 120 × 4 mm Quotation for Muscat
For Muscat the delivery basis comes first in the quotation. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Buy SHS 120 × 120 × 4 mm via Sohar
Sohar cargo is quoted with port handover. Name the terminal and discharge terms in your SHS 120 × 120 × 4 mm request.
SHS 120 × 120 × 4 mm Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Name the grade and tonnage for SHS 120 × 120 × 4 mm in your request.
Buy SHS 120 × 120 × 4 mm in Kuwait City
Kuwait City offers state the yard handling limits for long lengths. Name the unloading equipment when you ask for the SHS 120 × 120 × 4 mm price.
SHS 120 × 120 × 4 mm Price via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Name the terminal and discharge terms in your SHS 120 × 120 × 4 mm request.
SHS 120 × 120 × 4 mm Price in Georgia
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for SHS 120 × 120 × 4 mm.
SHS 120 × 120 × 4 mm Price in Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Name the unloading equipment when you ask for the SHS 120 × 120 × 4 mm price.
Request SHS 120 × 120 × 4 mm Offer for Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Buy SHS 120 × 120 × 4 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of long lengths. Ask for a port-based SHS 120 × 120 × 4 mm basis next to a delivered one.
SHS 120 × 120 × 4 mm Price via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Name the terminal and discharge terms in your SHS 120 × 120 × 4 mm request.
SHS 120 × 120 × 4 mm Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Send tonnage, grade and the delivery point for SHS 120 × 120 × 4 mm.
Request SHS 120 × 120 × 4 mm Offer for Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Send the receiving address with your SHS 120 × 120 × 4 mm tonnage.
Buying Square hollow sections 120 × 120 × 4 mm and requesting a price
The price for Square hollow sections 120 × 120 × 4 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Square hollow sections 120 × 120 × 4 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Square hollow sections 120 × 120 × 4 mm
Include Square hollow sections 120 × 120 × 4 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Square hollow sections 120 × 120 × 4 mm
Square hollow sections 120 × 120 × 4 mm S355J2H
For Square hollow sections 120 × 120 × 4 mm S355J2H, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
