Review Square hollow sections for the 60 × 60 × 3 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
60 × 60 × 3 mm: outside height 60 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 5.19 kg/m (EN 10219 reference geometry); calculated weights are 31.14 kg for 6 m and 62.28 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Square hollow sections 60 × 60 × 3 mm
Square hollow sections 60 × 60 × 3 mm Technical and buying guide
EMRA Steel
Review Square hollow sections for the 60 × 60 × 3 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
60 × 60 × 3 mm: outside height 60 mm, outside width 60 mm and nominal wall thickness 3 mm. Reference mass approximately 5.19 kg/m (EN 10219 reference geometry); calculated weights are 31.14 kg for 6 m and 62.28 kg for 12 m. Request 6 m, 12 m or agreed cut lengths, subject to confirmation. Actual weight depends on dimensional tolerances and the supplied section; confirm the mill table and weighing basis. Square hollow sections 60 × 60 × 3 mm
Specification and dimensions
Specify the following dimensions or analysis details for Square hollow sections: Outside diameter × wall thickness × length for circular sections; width × height × wall thickness × length for rectangular sections.. The examples below are enquiry references, not a confirmed stock range.
Grades and applicable standards
The square and rectangular weights below use cold-formed welded EN 10219 reference geometry. EN 10219-1 covers technical delivery requirements and EN 10219-2 dimensions and tolerances. Specify the full grade, such as S355J2H, and required inspection documents. Hot-finished EN 10210 sections require their own agreed section table: corner radii and mass can differ at the same outside dimensions and thickness. Confirm surface condition, corner geometry, seam location and fabrication requirements.
Applications and project requirements
For Square hollow sections, share the intended production process or project specification. Required properties, processing condition, surface acceptance and dimensional tolerances should reflect the actual application. Supply selection should be reviewed against the technical requirements rather than based on dimensions alone.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Buying Square hollow sections 60 × 60 × 3 mm and requesting a price
The price for Square hollow sections 60 × 60 × 3 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Square hollow sections 60 × 60 × 3 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Square hollow sections 60 × 60 × 3 mm
Include Square hollow sections 60 × 60 × 3 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
