Compare UE light channels and UPN channels by section height, flange width, web and flange thickness, and weight per metre.
Steel channels are open structural sections; exact series and dimensions determine the ordered section.
Get a quote ↗Talk to the EMRA Steel team about your requirements.
Compare UE light channels and UPN channels by section height, flange width, web and flange thickness, and weight per metre.
Compare UE light channels and UPN channels by section height, flange width, web and flange thickness, and weight per metre.
Steel channels are open structural sections; exact series and dimensions determine the ordered section.
Channels: exact section series and designation, overall height, flange width, web thickness, flange thickness and length. State whether the order is UPN, UPE or another specified series. A nominal height alone does not identify the section; angle-leg dimensions do not apply.
UPN dimensions: EN 10365 / DIN 1026-1; tolerances: EN 10279. The UE light-channel data below refer to the taper-flange series in GOST 8240-97; UE is distinct from UPE. UE reference dimensions and tolerances follow GOST 8240-97; specify EN 10279 separately if required by the order. Confirm the applicable dimensional and tolerance standards in the supply specification. Material enquiries may specify S235JR, S275JR or S355J2 to EN 10025-2, or an agreed grade under the specified material standard. If ISIRI 4477-1 is required, state it explicitly and request matching inspection documents. This list does not declare simultaneous certification or current stock.
Channels are used in frames, supports and fabrication. Orientation, connection details and the specified series matter; a light or heavy label alone is insufficient to establish equivalence.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
UPN 80 heavy channel: nominal height 80 mm, flange width 45 mm, web thickness 6 mm and flange thickness 8 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 8.6 kg/m; calculated bar weights are 51.6 kg for 6 m and 103.2 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 100 heavy channel: nominal height 100 mm, flange width 50 mm, web thickness 6 mm and flange thickness 8.5 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 10.6 kg/m; calculated bar weights are 63.6 kg for 6 m and 127.2 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 120 heavy channel: nominal height 120 mm, flange width 55 mm, web thickness 7 mm and flange thickness 9 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 13.4 kg/m; calculated bar weights are 80.4 kg for 6 m and 160.8 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 140 heavy channel: nominal height 140 mm, flange width 60 mm, web thickness 7 mm and flange thickness 10 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 16 kg/m; calculated bar weights are 96 kg for 6 m and 192 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 160 heavy channel: nominal height 160 mm, flange width 65 mm, web thickness 7.5 mm and flange thickness 10.5 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 18.8 kg/m; calculated bar weights are 112.8 kg for 6 m and 225.6 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 180 heavy channel: nominal height 180 mm, flange width 70 mm, web thickness 8 mm and flange thickness 11 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 22 kg/m; calculated bar weights are 132 kg for 6 m and 264 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UPN 200 heavy channel: nominal height 200 mm, flange width 75 mm, web thickness 8.5 mm and flange thickness 11.5 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 25.3 kg/m; calculated bar weights are 151.8 kg for 6 m and 303.6 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 80 light channel: nominal height 80 mm, flange width 40 mm, web thickness 4.5 mm and flange thickness 7.4 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 7.05 kg/m; calculated bar weights are 42.3 kg for 6 m and 84.6 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 100 light channel: nominal height 100 mm, flange width 46 mm, web thickness 4.5 mm and flange thickness 7.6 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 8.59 kg/m; calculated bar weights are 51.54 kg for 6 m and 103.08 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 120 light channel: nominal height 120 mm, flange width 52 mm, web thickness 4.8 mm and flange thickness 7.8 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 10.4 kg/m; calculated bar weights are 62.4 kg for 6 m and 124.8 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 140 light channel: nominal height 140 mm, flange width 58 mm, web thickness 4.9 mm and flange thickness 8.1 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 12.3 kg/m; calculated bar weights are 73.8 kg for 6 m and 147.6 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 160 light channel: nominal height 160 mm, flange width 64 mm, web thickness 5 mm and flange thickness 8.4 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 14.2 kg/m; calculated bar weights are 85.2 kg for 6 m and 170.4 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 180 light channel: nominal height 180 mm, flange width 70 mm, web thickness 5.1 mm and flange thickness 8.7 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 16.3 kg/m; calculated bar weights are 97.8 kg for 6 m and 195.6 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
UE 200 light channel: nominal height 200 mm, flange width 76 mm, web thickness 5.2 mm and flange thickness 9 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Reference mass approximately 18.4 kg/m; calculated bar weights are 110.4 kg for 6 m and 220.8 kg for 12 m. Actual mass depends on rolling tolerances; confirm the mill table and weighing basis.
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Only after the proposed material and the project requirements have been technically reviewed.
For a channel quotation, provide the complete series and designation, length, grade and quantity. Confirm section mass and delivery basis when comparing offers. Get a quote
