Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
H-beams are structural sections; HEA and HEB designations describe different section series and are not interchangeable by nominal height alone.
HEB wide-flange beams: compare the heavier HE series using its own dimensions and weights, separately from HEA.Read more
Standards and applicability
Use the exact series and section table: EN 10365 dimensions, EN 10034 I/H tolerances or EN 10279 channel tolerances; a UE/GOST 8240 section is not automatically UPN. Material references below are EN 10025-2, with the actual web/flange thickness band where known. The hub compares 3 < t ≤ 63 mm bands. Tensile/yield values do not establish member capacity. Elongation, orientation, impact specimen and acceptance conditions require the complete order specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S235JR
40 < t ≤ 63 mm
≥215
360–510
—
27 J / +20°C
S275JR
3 < t ≤ 16 mm
≥275
410–560
—
27 J / +20°C
S275JR
16 < t ≤ 40 mm
≥265
410–560
—
27 J / +20°C
S275JR
40 < t ≤ 63 mm
≥255
410–560
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
S355J2
40 < t ≤ 63 mm
≥335
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
40 < t ≤ 63 mm
≤0.20
≤1.40
—
≤0.035
≤0.035
—
S275JR
3 < t ≤ 16 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
16 < t ≤ 40 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
40 < t ≤ 63 mm
≤0.22
≤1.50
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
40 < t ≤ 63 mm
≤0.22
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
HEB wide-flange beams: compare the heavier HE series using its own dimensions and weights, separately from HEA.
H-beams are structural sections; HEA and HEB designations describe different section series and are not interchangeable by nominal height alone.
Specification and dimensions
H-beams: exact series and designation such as HEA 100 or HEB 200, plus length. Confirm overall height, flange width, web thickness and flange thickness against the specified section table. HEA and HEB have different dimensions and mass; equal-angle leg dimensions do not apply.
Grades and applicable standards
Dimensions: EN 10365; tolerances on shape and dimensions: EN 10034. Specify the full material grade separately, for example S235JR, S275JR or S355J2 to EN 10025-2, together with the required inspection documents. HEA and HEB of the same nominal size have different actual dimensions, thicknesses and mass. The designation number is not always the actual section height. IPE, HEA and HEB are separate series; confirm the section table, required length, quantity and delivery destination with EMRA Steel.
Applications and project requirements
H-beams are used in structural columns, frames and other designed members. The exact HE series, section properties and connection requirements must be selected from the project specification.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
HEB Beam Price by Grade: S235JR, S275JR, S355J2, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the full standard designation and edition when you ask for a price.
HEB Beam S235JR Price per Ton
S235JR limits C 0.17 max and Mn 1.40 max up to 16 mm thickness with a 235 MPa minimum yield, with P and S at 0.035 max and 27 J impact at +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request HEB Beam S275JR Quotation
S275JR (C 0.21 max, Mn 1.50 max, 275 MPa minimum yield up to 16 mm) is the step up from S235JR when the design asks for more strength. Include bundle and loading limits. Quotations are available for UAE.
Buy HEB Beam S355J2
S355J2 holds a 355 MPa minimum yield up to 16 mm with tighter P and S at 0.025 max (C 0.20 max, Mn 1.60 max, Si 0.55 max) and 27 J at −20°C. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
HEB Beam St37, St44, St52 Price per Ton
Old drawings still ask for St37-2 / 1.0037 (C 0.17 max, P and S 0.050 max), St44-2 / 1.0044 (C 0.21 max) or St52-3 / 1.0570 (C 0.20 max, Mn 1.60 max, Si 0.55 max). Send tonnage and bar length for a price. Enquiries from Georgia are quoted on a stated delivery basis.
HEB Beam Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies HEB Beam to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide.
HEB Beam Price in Georgia
The HEB Beam price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
HEB Beam Price in Tbilisi
For HEB Beam delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
HEB Beam Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies HEB Beam to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide.
HEB Beam Price in UAE
The HEB Beam price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
HEB Beam Price in Dubai
For HEB Beam delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy HEB Beam: Price and Quotation by Destination
EMRA Steel quotes HEB 100–600 beams for nine destination markets. Each offer states grade, section designation, bar length, bundling and whether the price is port-based or delivered to a named city.
HEB Beam Price in Turkmenistan
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for HEB Beam in your request.
HEB Beam Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the HEB Beam price.
Buy HEB Beam via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based HEB Beam basis next to a delivered one.
Request HEB Beam Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for HEB Beam in your request.
Request HEB Beam Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your HEB Beam tonnage.
HEB Beam Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your HEB Beam tonnage.
Request HEB Beam via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your HEB Beam request.
HEB Beam for Qatar: Price and Offer
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for HEB Beam.
HEB Beam Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your HEB Beam tonnage.
Request HEB Beam via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your HEB Beam request.
Buy HEB Beam for Oman
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for HEB Beam.
Buy HEB Beam in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the HEB Beam price.
Buy HEB Beam via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your HEB Beam request.
HEB Beam Price in Kuwait
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for HEB Beam.
HEB Beam Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the HEB Beam price.
HEB Beam Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based HEB Beam basis next to a delivered one.
Request HEB Beam Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for HEB Beam in your request.
Request HEB Beam Offer for Tbilisi
Tbilisi enquiries go to our head office, so bar lengths, bundling and loading can be agreed directly. Send the receiving address with your HEB Beam tonnage.
HEB Beam Quotation for Kutaisi
Kutaisi offers separate the bar price from the road freight. Send the receiving address with your HEB Beam tonnage.
Buy HEB Beam via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your HEB Beam request.
HEB Beam Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your HEB Beam request.
HEB Beam for Armenia: Price and Offer
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for HEB Beam in your request.
HEB Beam Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the bar price. Send the receiving address with your HEB Beam tonnage.
Buy HEB Beam for Azerbaijan
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for HEB Beam in your request.
Buy HEB Beam in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the HEB Beam price.
HEB Beam Price in Uzbekistan
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for HEB Beam.
HEB Beam Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the HEB Beam price.
Request HEB Beam Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your HEB Beam tonnage.
Sizes, weights and quotation guidance
HEB 100
HEB 100 has an actual section height of 100 mm, flange width 100 mm, web thickness 6 mm and flange thickness 10 mm. Reference mass is approximately 20.4 kg/m; calculated weights are 122.4 kg for a 6 m length and 244.8 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 100
HEB 120
HEB 120 has an actual section height of 120 mm, flange width 120 mm, web thickness 6.5 mm and flange thickness 11 mm. Reference mass is approximately 26.7 kg/m; calculated weights are 160.2 kg for a 6 m length and 320.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 120
HEB 140
HEB 140 has an actual section height of 140 mm, flange width 140 mm, web thickness 7 mm and flange thickness 12 mm. Reference mass is approximately 33.7 kg/m; calculated weights are 202.2 kg for a 6 m length and 404.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 140
HEB 160
HEB 160 has an actual section height of 160 mm, flange width 160 mm, web thickness 8 mm and flange thickness 13 mm. Reference mass is approximately 42.6 kg/m; calculated weights are 255.6 kg for a 6 m length and 511.2 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 160
HEB 180
HEB 180 has an actual section height of 180 mm, flange width 180 mm, web thickness 8.5 mm and flange thickness 14 mm. Reference mass is approximately 51.2 kg/m; calculated weights are 307.2 kg for a 6 m length and 614.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 180
HEB 200
HEB 200 has an actual section height of 200 mm, flange width 200 mm, web thickness 9 mm and flange thickness 15 mm. Reference mass is approximately 61.3 kg/m; calculated weights are 367.8 kg for a 6 m length and 735.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 200
HEB 220
HEB 220 has an actual section height of 220 mm, flange width 220 mm, web thickness 9.5 mm and flange thickness 16 mm. Reference mass is approximately 71.5 kg/m; calculated weights are 429 kg for a 6 m length and 858 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 220
HEB 240
HEB 240 has an actual section height of 240 mm, flange width 240 mm, web thickness 10 mm and flange thickness 17 mm. Reference mass is approximately 83.2 kg/m; calculated weights are 499.2 kg for a 6 m length and 998.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 240
HEB 260
HEB 260 has an actual section height of 260 mm, flange width 260 mm, web thickness 10 mm and flange thickness 17.5 mm. Reference mass is approximately 93 kg/m; calculated weights are 558 kg for a 6 m length and 1116 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 260
HEB 280
HEB 280 has an actual section height of 280 mm, flange width 280 mm, web thickness 10.5 mm and flange thickness 18 mm. Reference mass is approximately 103 kg/m; calculated weights are 618 kg for a 6 m length and 1236 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 280
HEB 300
HEB 300 has an actual section height of 300 mm, flange width 300 mm, web thickness 11 mm and flange thickness 19 mm. Reference mass is approximately 117 kg/m; calculated weights are 702 kg for a 6 m length and 1404 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 300
HEB 320
HEB 320 has an actual section height of 320 mm, flange width 300 mm, web thickness 11.5 mm and flange thickness 20.5 mm. Reference mass is approximately 127 kg/m; calculated weights are 762 kg for a 6 m length and 1524 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 320
HEB 340
HEB 340 has an actual section height of 340 mm, flange width 300 mm, web thickness 12 mm and flange thickness 21.5 mm. Reference mass is approximately 134 kg/m; calculated weights are 804 kg for a 6 m length and 1608 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 340
HEB 360
HEB 360 has an actual section height of 360 mm, flange width 300 mm, web thickness 12.5 mm and flange thickness 22.5 mm. Reference mass is approximately 142 kg/m; calculated weights are 852 kg for a 6 m length and 1704 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 360
HEB 400
HEB 400 has an actual section height of 400 mm, flange width 300 mm, web thickness 13.5 mm and flange thickness 24 mm. Reference mass is approximately 155 kg/m; calculated weights are 930 kg for a 6 m length and 1860 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 400
HEB 450
HEB 450 has an actual section height of 450 mm, flange width 300 mm, web thickness 14 mm and flange thickness 26 mm. Reference mass is approximately 171 kg/m; calculated weights are 1026 kg for a 6 m length and 2052 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 450
HEB 500
HEB 500 has an actual section height of 500 mm, flange width 300 mm, web thickness 14.5 mm and flange thickness 28 mm. Reference mass is approximately 187 kg/m; calculated weights are 1122 kg for a 6 m length and 2244 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 500
HEB 550
HEB 550 has an actual section height of 550 mm, flange width 300 mm, web thickness 15 mm and flange thickness 29 mm. Reference mass is approximately 199 kg/m; calculated weights are 1194 kg for a 6 m length and 2388 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 550
HEB 600
HEB 600 has an actual section height of 600 mm, flange width 300 mm, web thickness 15.5 mm and flange thickness 30 mm. Reference mass is approximately 212 kg/m; calculated weights are 1272 kg for a 6 m length and 2544 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 600
Frequently asked questions
Does an example mean immediate availability?
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Can a different grade or standard be substituted?
Only after the proposed material and the project requirements have been technically reviewed.
Quotation requirements
For an H-beam quotation, provide HEA, HEB or the specified series, nominal designation, length, grade and quantity. Compare prices only for matching series and specifications. Get a quote
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for HEB steel beams
HEB steel beams S235JR
For HEB steel beams S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEB steel beams S275JR
For HEB steel beams S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEB steel beams S355J2
For HEB steel beams S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
