Compare thicknesses, dimensions, grades and supply options.
Cold-rolled sheet and coil
Cold-rolled sheet and coil for precision forming and visible components. Compare thickness, forming grade, surface finish and protective oiling.
Cold-rolled sheet and coil: Quick reference
Cold-rolled sheet and coil
Parameter
Value
Dimensional / material references
EN 10130; EN 10131
Grade / material
DC01 / DC04
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Cold-rolled sheet and coil are used where dimensions and surface condition matter; agree finish and processing requirements.
Appliance panels, formed components and selected automotive or general engineering parts. Drawing severity, visible-surface requirements and downstream coating determine the specification.
Cold-rolled sheet and coil Technical and buying guide
EMRA Steel
Cold-rolled sheet and coil for precision forming and visible components. Compare thickness, forming grade, surface finish and protective oiling.Read more
Standards and applicability
These are uncoated DC01/DC04 references to EN 10130, with dimensional tolerances to EN 10131. The displayed base mechanical values are for t > 0.7 mm within the applicable standard range. For 0.5 < t ≤ 0.7 mm the yield ceiling may rise 20 MPa and minimum A80 fall 2 percentage points; at t ≤ 0.5 mm the adjustments are 40 MPa and 4 points. Confirm surface class, finish, oiling, ageing and testing time. Coated products require their own specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
DC01
t > 0.7 mm
≤280
270–410
≥28 (A80)
—
DC04
t > 0.7 mm
≤210
270–350
≥38 (A80)
—
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
DC01
EN 10130
≤0.12
≤0.60
—
≤0.045
≤0.045
—
DC04
EN 10130
≤0.08
≤0.40
—
≤0.030
≤0.030
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Cold-rolled sheet and coil Technical and buying guide
Cold-rolled sheet and coil for precision forming and visible components. Compare thickness, forming grade, surface finish and protective oiling.
Specification and dimensions
No preset numerical sizes are published for this product. Enter the required dimensions in the enquiry and specify grade, coil or cut-sheet form, surface finish, oiling and edge condition. Dimensions and supply require quotation confirmation.
Grades and applicable standards
For uncoated low-carbon forming steel, specify DC01 or DC04 to EN 10130 and the applicable EN 10131 dimensional and shape tolerances. If a JIS grade is requested, state the complete JIS G 3141 designation separately; grade equivalence must be technically agreed.
Applications and project requirements
Appliance panels, formed components and selected automotive or general engineering parts. Drawing severity, visible-surface requirements and downstream coating determine the specification.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Cold-Rolled Sheet and Coil Price by Grade: DC01, DC04
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Cold-Rolled Sheet and Coil DC01 Price per Ton
DC01 (EN 10130): C 0.12 max, Mn 0.60 max, P 0.045 max, S 0.045 max; t > 0.7 mm: Re 280 MPa max, Rm 270–410 MPa, A 28 % min (A80). State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Cold-Rolled Sheet and Coil DC04 Quotation
Reference values for DC04 (EN 10130): C 0.08 max, Mn 0.40 max, P 0.030 max, S 0.030 max; t > 0.7 mm: Re 210 MPa max, Rm 270–350 MPa, A 38 % min (A80). Include packing and loading limits. Quotations are available for UAE.
Cold-Rolled Sheet and Coil DC01 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Cold-Rolled Sheet and Coil to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with coil weight, surface finish and packing. See the Georgia market guide. Available grades: DC01 and DC04.
Cold-Rolled Sheet and Coil DC04 Price in Georgia
The Cold-Rolled Sheet and Coil price in Georgia depends on grade, quantity and the delivery basis, as well as coil weight, surface finish and packing. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Cold-Rolled Sheet and Coil DC01 Price in Tbilisi
For Cold-Rolled Sheet and Coil delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Cold-Rolled Sheet and Coil DC04 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Cold-Rolled Sheet and Coil to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with coil weight, surface finish and packing. See the UAE market guide. Available grades: DC01 and DC04.
Cold-Rolled Sheet and Coil DC01 Price in UAE
The Cold-Rolled Sheet and Coil price in the UAE depends on grade, quantity and the delivery basis, as well as coil weight, surface finish and packing. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Cold-Rolled Sheet and Coil DC04 Price in Dubai
For Cold-Rolled Sheet and Coil delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Cold-Rolled Sheet and Coil: Price and Quotation by Destination
EMRA Steel quotes cold-rolled sheet and coils for nine destination markets. Each offer states grade, size, length, packing and whether the price is port-based or delivered to a named city.
Cold-Rolled Sheet and Coil DC04 Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Cold-Rolled Sheet and Coil in your request.
Cold-Rolled Sheet and Coil Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Cold-Rolled Sheet and Coil price.
Buy Cold-Rolled Sheet and Coil via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Cold-Rolled Sheet and Coil basis next to a delivered one.
Request Cold-Rolled Sheet and Coil Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Cold-Rolled Sheet and Coil in your request.
Request Cold-Rolled Sheet and Coil Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Cold-Rolled Sheet and Coil Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Request Cold-Rolled Sheet and Coil via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Cold-Rolled Sheet and Coil request.
Cold-Rolled Sheet and Coil DC01 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Cold-Rolled Sheet and Coil.
Cold-Rolled Sheet and Coil Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Request Cold-Rolled Sheet and Coil via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Cold-Rolled Sheet and Coil request.
Cold-Rolled Sheet and Coil DC04 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Cold-Rolled Sheet and Coil.
Buy Cold-Rolled Sheet and Coil in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Cold-Rolled Sheet and Coil price.
Buy Cold-Rolled Sheet and Coil via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Cold-Rolled Sheet and Coil request.
Cold-Rolled Sheet and Coil DC01 Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Cold-Rolled Sheet and Coil.
Cold-Rolled Sheet and Coil Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Cold-Rolled Sheet and Coil price.
Cold-Rolled Sheet and Coil Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Cold-Rolled Sheet and Coil basis next to a delivered one.
Request Cold-Rolled Sheet and Coil Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Cold-Rolled Sheet and Coil in your request.
Request Cold-Rolled Sheet and Coil Offer for Tbilisi
Tbilisi enquiries go to our head office, so sizes, packing and loading can be agreed directly. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Cold-Rolled Sheet and Coil Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Buy Cold-Rolled Sheet and Coil via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Cold-Rolled Sheet and Coil request.
Cold-Rolled Sheet and Coil Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Cold-Rolled Sheet and Coil request.
Cold-Rolled Sheet and Coil DC01 Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Cold-Rolled Sheet and Coil in your request.
Cold-Rolled Sheet and Coil Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Cold-Rolled Sheet and Coil DC01 Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Cold-Rolled Sheet and Coil in your request.
Buy Cold-Rolled Sheet and Coil in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Cold-Rolled Sheet and Coil price.
Cold-Rolled Sheet and Coil DC04 Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Cold-Rolled Sheet and Coil.
Cold-Rolled Sheet and Coil Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Cold-Rolled Sheet and Coil price.
Request Cold-Rolled Sheet and Coil Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Cold-Rolled Sheet and Coil tonnage.
Sizes, weights and quotation guidance
Dimensions are examples for preparing an enquiry, not a declared stock range. Calculated weights are theoretical; mill limits, rolling tolerances and the agreed weighing basis govern the order.
Cold-rolled sheet and coil Prices and quotation requirements
For a price quotation, send the exact dimensions, complete grade and standard, total tonnes, delivery destination and required date. Confirm surface, inspection certificate, packaging, currency, delivery term and quotation validity. EMRA Steel confirms supply and commercial terms after reviewing the enquiry.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Cold-rolled sheet and coil
Cold-rolled sheet and coil DC01
For Cold-rolled sheet and coil DC01, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Cold-rolled sheet and coil DC04
For Cold-rolled sheet and coil DC04, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
