Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Steel slabs are rectangular semi-finished products used to produce flat steel products.
Feedstock for hot-strip mills and plate rolling. Match slab dimensions, chemistry, surface condition and internal quality to the mill reheating, rolling and final-product requirements.
Steel slabs for flat-product rolling. Compare casting dimensions, chemistry and surface acceptance before requesting a quotation.Read more
Standards and applicability
Specify the cast cross-section and cut length, full heat chemistry, deoxidation, surface acceptance, internal soundness and downstream rolling route. Finished EN 10025 mechanical values cannot certify an unrolled billet or slab. For 3SP/5SP requests, provide the complete GOST or other agreed specification and edition; no universal numerical chemistry is assigned from a short commercial name.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
C
%
Agreed in the order
Mn
%
Agreed in the order
Si
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Al
%
Agreed in the order
Nb
%
Agreed in the order
V
%
Agreed in the order
Ti
%
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
3SP and 5SP · GOST 380-2005 ladle analysis
3SP and 5SP refer here to fully killed Ст3сп and Ст5сп. These chemistry references support billet/slab enquiries; casting quality, residual elements, steelmaking-route exceptions and the downstream product standard remain separate order requirements. Finished rolled-steel mechanical properties do not certify an as-cast billet or slab.
3SP and 5SP · GOST 380-2005 ladle analysis
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
3SP / Ст3сп
0.14–0.22
0.40–0.65
0.15–0.30
≤0.040
≤0.050
5SP / Ст5сп
0.28–0.37
0.50–0.80
0.15–0.30
≤0.040
≤0.050
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Requested minimum manganese: 0.50% and 0.60%
Mn +0.50 and Mn +0.60 mean Mn ≥0.50% and Mn ≥0.60%. The table intersects each buyer minimum with the grade range. They are optional purchase limits, not new standard grade names. St52-3 has a maximum Mn limit in the reference below; a minimum of 0.50% or 0.60% requires separate mill agreement.
Requested minimum manganese: 0.50% and 0.60%
Grade / commercial type
Buyer requirement
Compatible Mn range (%)
3SP
Mn ≥0.50%
0.50–0.65
3SP
Mn ≥0.60%
0.60–0.65
5SP
Mn ≥0.50%
0.50–0.80
5SP
Mn ≥0.60%
0.60–0.80
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Steel slab Technical and buying guide
Steel slabs for flat-product rolling. Compare casting dimensions, chemistry and surface acceptance before requesting a quotation.
Specification and dimensions
Specify cast thickness × width × cut length, heat chemistry and the downstream rolling route. Examples use 200 or 250 mm thickness, 1000 to 2000 mm width and a 6000 mm reference length; confirm the casting mill's actual limits.
Grades and applicable standards
Agree the slab chemistry, residual-element limits, casting quality, heat identification and acceptance specification. The intended finished-product grade is a rolling target; EN 10025-2 for finished structural steel must not automatically be treated as a slab certification standard.
Applications and project requirements
Feedstock for hot-strip mills and plate rolling. Match slab dimensions, chemistry, surface condition and internal quality to the mill reheating, rolling and final-product requirements.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Steel Slab Price by Grade: 3SP, 5SP, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Steel Slab 3SP / Ст3сп Price per Ton
3SP / Ст3сп (GOST 380-2005): C 0.14–0.22, Mn 0.40–0.65, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.65; Mn 0.60 %: 0.60–0.65. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Steel Slab 5SP / Ст5сп Quotation
Reference values for 5SP / Ст5сп (GOST 380-2005): C 0.28–0.37, Mn 0.50–0.80, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.80; Mn 0.60 %: 0.60–0.80. Include stacking and loading limits. Quotations are available for UAE.
Buy Steel Slab St37, St44, St52
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
Steel Slab Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Steel Slab to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with slab dimensions, piece weight and heat chemistry. See the Georgia market guide.
Steel Slab Price in Georgia
The Steel Slab price in Georgia depends on grade, quantity and the delivery basis, as well as slab dimensions, piece weight and heat chemistry. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Steel Slab Price in Tbilisi
For Steel Slab delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Steel Slab Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Steel Slab to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with slab dimensions, piece weight and heat chemistry. See the UAE market guide.
Steel Slab Price in UAE
The Steel Slab price in the UAE depends on grade, quantity and the delivery basis, as well as slab dimensions, piece weight and heat chemistry. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Steel Slab Price in Dubai
For Steel Slab delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Steel Slab: Price and Quotation by Destination
EMRA Steel quotes steel slabs for nine destination markets. Each offer states grade, size, packing and whether the price is port-based or delivered to a named city.
Steel Slab Price in Turkmenistan
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Steel Slab in your request.
Steel Slab Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Steel Slab price.
Buy Steel Slab via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Steel Slab basis next to a delivered one.
Request Steel Slab Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Steel Slab in your request.
Request Steel Slab Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Steel Slab tonnage.
Steel Slab Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Steel Slab tonnage.
Request Steel Slab via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Steel Slab request.
Steel Slab for Qatar: Price and Offer
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Steel Slab.
Steel Slab Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Steel Slab tonnage.
Request Steel Slab via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Steel Slab request.
Buy Steel Slab for Oman
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Steel Slab.
Buy Steel Slab in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Steel Slab price.
Buy Steel Slab via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Steel Slab request.
Steel Slab Price in Kuwait
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Steel Slab.
Steel Slab Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Steel Slab price.
Steel Slab Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Steel Slab basis next to a delivered one.
Request Steel Slab Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Steel Slab in your request.
Request Steel Slab Offer for Tbilisi
Tbilisi enquiries go to our head office, so dimensions, stacking and loading can be agreed directly. Send the receiving address with your Steel Slab tonnage.
Steel Slab Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Steel Slab tonnage.
Buy Steel Slab via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Steel Slab request.
Steel Slab Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Steel Slab request.
Steel Slab for Armenia: Price and Offer
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Steel Slab in your request.
Steel Slab Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Steel Slab tonnage.
Buy Steel Slab for Azerbaijan
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Steel Slab in your request.
Buy Steel Slab in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Steel Slab price.
Steel Slab Price in Uzbekistan
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Steel Slab.
Steel Slab Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Steel Slab price.
Request Steel Slab Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Steel Slab tonnage.
Sizes, weights and quotation guidance
Dimensions are examples for preparing an enquiry, not a declared stock range. Calculated weights are theoretical; mill limits, rolling tolerances and the agreed weighing basis govern the order.
200 × 1000 × 6000 mm
Reference dimensions: 200 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 9420 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 1000 × 6000 mm
200 × 1250 × 6000 mm
Reference dimensions: 200 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 11775 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 1250 × 6000 mm
200 × 1500 × 6000 mm
Reference dimensions: 200 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 14130 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 1500 × 6000 mm
200 × 1800 × 6000 mm
Reference dimensions: 200 × 1800 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 16956 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 1800 × 6000 mm
200 × 2000 × 6000 mm
Reference dimensions: 200 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 18840 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 2000 × 6000 mm
250 × 1500 × 6000 mm
Reference dimensions: 250 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 17662.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 250 × 1500 × 6000 mm
250 × 2000 × 6000 mm
Reference dimensions: 250 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 23550 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 250 × 2000 × 6000 mm
Steel slab Prices and quotation requirements
For a price quotation, send the exact dimensions, complete grade and standard, total tonnes, delivery destination and required date. Confirm surface, inspection certificate, packaging, currency, delivery term and quotation validity. EMRA Steel confirms supply and commercial terms after reviewing the enquiry.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Specification enquiries for Steel slab
Steel slab Chemical analysis
For Steel slab Chemical analysis, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
