Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Heavy plates are used in fabrication and construction. Special service conditions require the appropriate material specification.
Fabricated frames, base plates, machinery and structural components. Welding, bending, service temperature and inspection requirements determine the appropriate material and delivery condition.
Heavy steel plates for fabrication and structural work. Review thickness, width, length, grade and theoretical plate weight.Read more
Standards and applicability
EN 10029 controls plate dimensional and shape tolerances; EN 10025-2 controls the selected structural grade. Numeric rows use the thickness of this plate; the hub compares thickness bands. S235JR and S275JR differ from S355J2, including the impact test temperature. Agree delivery condition, test orientation, impact applicability, flatness, edge condition and any ultrasonic test. Do not apply section elongation values to wide plate.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S235JR
40 < t ≤ 63 mm
≥215
360–510
—
27 J / +20°C
S275JR
3 < t ≤ 16 mm
≥275
410–560
—
27 J / +20°C
S275JR
16 < t ≤ 40 mm
≥265
410–560
—
27 J / +20°C
S275JR
40 < t ≤ 63 mm
≥255
410–560
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
S355J2
40 < t ≤ 63 mm
≥335
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
40 < t ≤ 63 mm
≤0.20
≤1.40
—
≤0.035
≤0.035
—
S275JR
3 < t ≤ 16 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
16 < t ≤ 40 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
40 < t ≤ 63 mm
≤0.22
≤1.50
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
40 < t ≤ 63 mm
≤0.22
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Heavy steel plate Technical and buying guide
Heavy steel plates for fabrication and structural work. Review thickness, width, length, grade and theoretical plate weight.
Specification and dimensions
Published plate thicknesses: 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45 and 50 mm. Widths include 1000, 1220 and 1250 mm. Cut lengths of 2440 and 3050 mm are listed only for 1220 mm width. At 1220 mm width and listed thicknesses from 6 to 35 mm, only 2440, 3050 and 12000 mm lengths are published. Other listed combinations retain their 6000 and 12000 mm lengths. Specify full grade, flatness, edge condition and inspection. Dimensions are enquiry references; confirm the manufacturing route and supply with the quotation.
Grades and applicable standards
For structural plate, specify a full grade such as S235JR, S275JR or S355J2 to EN 10025-2. EN 10029 addresses plate dimensional and shape tolerances. Pressure-vessel and shipbuilding uses require their own approved material specifications.
Applications and project requirements
Fabricated frames, base plates, machinery and structural components. Welding, bending, service temperature and inspection requirements determine the appropriate material and delivery condition.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Heavy Steel Plate Price by Grade: S235JR, S275JR, S355J2, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Heavy Steel Plate S235JR Price per Ton
S235JR (3 < t ≤ 16 mm): C 0.17 max, Mn 1.40 max, P 0.035 max, S 0.035 max; Re 235 MPa min, Rm 360–510 MPa, impact 27 J / +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Heavy Steel Plate S275JR Quotation
Reference values for S275JR (3 < t ≤ 16 mm): C 0.21 max, Mn 1.50 max, P 0.035 max, S 0.035 max; Re 275 MPa min, Rm 410–560 MPa, impact 27 J / +20°C. Include packing and loading limits. Quotations are available for UAE.
Buy Heavy Steel Plate S355J2
Reference values for S355J2 (3 < t ≤ 16 mm): C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.025 max, S 0.025 max; Re 355 MPa min, Rm 470–630 MPa, impact 27 J / −20°C. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
Heavy Steel Plate St37, St44, St52 Price per Ton
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Send tonnage and size for a price. Enquiries from Georgia are quoted on a stated delivery basis.
Heavy Steel Plate Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Heavy Steel Plate to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the Georgia market guide.
Heavy Steel Plate Price in Georgia
The Heavy Steel Plate price in Georgia depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate Price in Tbilisi
For Heavy Steel Plate delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Heavy Steel Plate Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Heavy Steel Plate to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the UAE market guide.
Heavy Steel Plate Price in UAE
The Heavy Steel Plate price in the UAE depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate Price in Dubai
For Heavy Steel Plate delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Heavy Steel Plate: Price and Quotation by Destination
EMRA Steel quotes heavy steel plates for nine destination markets. Each offer states grade, size, length, packing and whether the price is port-based or delivered to a named city.
Heavy Steel Plate Price in Turkmenistan
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Heavy Steel Plate in your request.
Heavy Steel Plate Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Heavy Steel Plate price.
Buy Heavy Steel Plate via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Heavy Steel Plate basis next to a delivered one.
Request Heavy Steel Plate Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Heavy Steel Plate in your request.
Request Heavy Steel Plate Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Heavy Steel Plate tonnage.
Heavy Steel Plate Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Heavy Steel Plate tonnage.
Request Heavy Steel Plate via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Heavy Steel Plate request.
Heavy Steel Plate for Qatar: Price and Offer
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate.
Heavy Steel Plate Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Heavy Steel Plate tonnage.
Request Heavy Steel Plate via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Heavy Steel Plate request.
Buy Heavy Steel Plate for Oman
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Heavy Steel Plate.
Buy Heavy Steel Plate in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Heavy Steel Plate price.
Buy Heavy Steel Plate via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Heavy Steel Plate request.
Heavy Steel Plate Price in Kuwait
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate.
Heavy Steel Plate Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Heavy Steel Plate price.
Heavy Steel Plate Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Heavy Steel Plate basis next to a delivered one.
Request Heavy Steel Plate Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Heavy Steel Plate in your request.
Request Heavy Steel Plate Offer for Tbilisi
Tbilisi enquiries go to our head office, so sizes, packing and loading can be agreed directly. Send the receiving address with your Heavy Steel Plate tonnage.
Heavy Steel Plate Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Heavy Steel Plate tonnage.
Buy Heavy Steel Plate via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Heavy Steel Plate request.
Heavy Steel Plate Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Heavy Steel Plate request.
Heavy Steel Plate for Armenia: Price and Offer
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Heavy Steel Plate in your request.
Heavy Steel Plate Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Heavy Steel Plate tonnage.
Buy Heavy Steel Plate for Azerbaijan
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Heavy Steel Plate in your request.
Buy Heavy Steel Plate in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Heavy Steel Plate price.
Heavy Steel Plate Price in Uzbekistan
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Heavy Steel Plate.
Heavy Steel Plate Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Heavy Steel Plate price.
Request Heavy Steel Plate Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Heavy Steel Plate tonnage.
Sizes, weights and quotation guidance
Dimensions are examples for preparing an enquiry, not a declared stock range. Calculated weights are theoretical; mill limits, rolling tolerances and the agreed weighing basis govern the order.
6 × 1000 × 6000 mm
Reference dimensions: 6 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 282.6 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1000 × 6000 mm
6 × 1000 × 12000 mm
Reference dimensions: 6 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 565.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1000 × 12000 mm
6 × 1220 × 2440 mm
Reference dimensions: 6 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 140.21 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 2440 mm
6 × 1220 × 3050 mm
Reference dimensions: 6 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 175.26 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 3050 mm
6 × 1220 × 12000 mm
Reference dimensions: 6 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 689.54 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 12000 mm
6 × 1250 × 6000 mm
Reference dimensions: 6 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 353.25 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1250 × 6000 mm
6 × 1250 × 12000 mm
Reference dimensions: 6 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 706.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1250 × 12000 mm
8 × 1000 × 6000 mm
Reference dimensions: 8 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 376.8 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1000 × 6000 mm
8 × 1000 × 12000 mm
Reference dimensions: 8 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 753.6 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1000 × 12000 mm
8 × 1200 × 6000 mm
Reference dimensions: 8 × 1200 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 452.16 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1200 × 6000 mm
8 × 1200 × 12000 mm
Reference dimensions: 8 × 1200 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 904.32 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1200 × 12000 mm
8 × 1220 × 2440 mm
Reference dimensions: 8 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 186.94 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 2440 mm
8 × 1220 × 3050 mm
Reference dimensions: 8 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 233.68 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 3050 mm
8 × 1220 × 12000 mm
Reference dimensions: 8 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 919.39 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 12000 mm
8 × 1250 × 6000 mm
Reference dimensions: 8 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 471 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1250 × 6000 mm
8 × 1250 × 12000 mm
Reference dimensions: 8 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 942 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1250 × 12000 mm
10 × 1000 × 6000 mm
Reference dimensions: 10 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 471 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1000 × 6000 mm
10 × 1000 × 12000 mm
Reference dimensions: 10 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 942 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1000 × 12000 mm
10 × 1220 × 2440 mm
Reference dimensions: 10 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 233.68 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 2440 mm
10 × 1220 × 3050 mm
Reference dimensions: 10 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 292.1 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 3050 mm
10 × 1220 × 12000 mm
Reference dimensions: 10 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1149.24 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 12000 mm
10 × 1250 × 6000 mm
Reference dimensions: 10 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 588.75 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1250 × 6000 mm
10 × 1250 × 12000 mm
Reference dimensions: 10 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1177.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1250 × 12000 mm
10 × 1500 × 6000 mm
Reference dimensions: 10 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 706.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1500 × 6000 mm
10 × 1500 × 12000 mm
Reference dimensions: 10 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1500 × 12000 mm
12 × 1000 × 6000 mm
Reference dimensions: 12 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 565.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1000 × 6000 mm
12 × 1000 × 12000 mm
Reference dimensions: 12 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1130.4 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1000 × 12000 mm
12 × 1220 × 2440 mm
Reference dimensions: 12 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 280.41 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 2440 mm
12 × 1220 × 3050 mm
Reference dimensions: 12 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 350.52 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 3050 mm
12 × 1220 × 12000 mm
Reference dimensions: 12 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1379.09 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 12000 mm
12 × 1250 × 6000 mm
Reference dimensions: 12 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 706.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1250 × 6000 mm
12 × 1250 × 12000 mm
Reference dimensions: 12 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1250 × 12000 mm
12 × 1500 × 6000 mm
Reference dimensions: 12 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 847.8 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1500 × 6000 mm
12 × 1500 × 12000 mm
Reference dimensions: 12 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1695.6 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1500 × 12000 mm
15 × 1000 × 6000 mm
Reference dimensions: 15 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 706.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1000 × 6000 mm
15 × 1000 × 12000 mm
Reference dimensions: 15 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1000 × 12000 mm
15 × 1220 × 2440 mm
Reference dimensions: 15 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 350.52 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1220 × 2440 mm
15 × 1220 × 3050 mm
Reference dimensions: 15 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 438.15 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1220 × 3050 mm
15 × 1220 × 12000 mm
Reference dimensions: 15 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1723.86 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1220 × 12000 mm
15 × 1250 × 6000 mm
Reference dimensions: 15 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 883.12 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1250 × 6000 mm
15 × 1250 × 12000 mm
Reference dimensions: 15 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1766.25 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1250 × 12000 mm
15 × 1500 × 6000 mm
Reference dimensions: 15 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1059.75 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1500 × 6000 mm
15 × 1500 × 12000 mm
Reference dimensions: 15 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2119.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 15 × 1500 × 12000 mm
20 × 1000 × 6000 mm
Reference dimensions: 20 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 942 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1000 × 6000 mm
20 × 1000 × 12000 mm
Reference dimensions: 20 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1884 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1000 × 12000 mm
20 × 1220 × 2440 mm
Reference dimensions: 20 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 467.36 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1220 × 2440 mm
20 × 1220 × 3050 mm
Reference dimensions: 20 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 584.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1220 × 3050 mm
20 × 1220 × 12000 mm
Reference dimensions: 20 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2298.48 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1220 × 12000 mm
20 × 1250 × 6000 mm
Reference dimensions: 20 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1177.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1250 × 6000 mm
20 × 1250 × 12000 mm
Reference dimensions: 20 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2355 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 1250 × 12000 mm
20 × 2000 × 6000 mm
Reference dimensions: 20 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1884 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 2000 × 6000 mm
20 × 2000 × 12000 mm
Reference dimensions: 20 × 2000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3768 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 20 × 2000 × 12000 mm
25 × 1000 × 6000 mm
Reference dimensions: 25 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1177.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1000 × 6000 mm
25 × 1000 × 12000 mm
Reference dimensions: 25 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2355 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1000 × 12000 mm
25 × 1220 × 2440 mm
Reference dimensions: 25 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 584.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1220 × 2440 mm
25 × 1220 × 3050 mm
Reference dimensions: 25 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 730.25 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1220 × 3050 mm
25 × 1220 × 12000 mm
Reference dimensions: 25 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2873.1 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1220 × 12000 mm
25 × 1250 × 6000 mm
Reference dimensions: 25 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1471.88 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1250 × 6000 mm
25 × 1250 × 12000 mm
Reference dimensions: 25 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2943.75 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 1250 × 12000 mm
25 × 2000 × 6000 mm
Reference dimensions: 25 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2355 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 2000 × 6000 mm
25 × 2000 × 12000 mm
Reference dimensions: 25 × 2000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 25 × 2000 × 12000 mm
30 × 1000 × 6000 mm
Reference dimensions: 30 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1000 × 6000 mm
30 × 1000 × 12000 mm
Reference dimensions: 30 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2826 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1000 × 12000 mm
30 × 1220 × 2440 mm
Reference dimensions: 30 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 701.04 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1220 × 2440 mm
30 × 1220 × 3050 mm
Reference dimensions: 30 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 876.3 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1220 × 3050 mm
30 × 1220 × 12000 mm
Reference dimensions: 30 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3447.72 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1220 × 12000 mm
30 × 1250 × 6000 mm
Reference dimensions: 30 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1766.25 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1250 × 6000 mm
30 × 1250 × 12000 mm
Reference dimensions: 30 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3532.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 1250 × 12000 mm
30 × 2000 × 6000 mm
Reference dimensions: 30 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2826 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 2000 × 6000 mm
30 × 2000 × 12000 mm
Reference dimensions: 30 × 2000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 5652 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 2000 × 12000 mm
35 × 1000 × 6000 mm
Reference dimensions: 35 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1648.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1000 × 6000 mm
35 × 1000 × 12000 mm
Reference dimensions: 35 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3297 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1000 × 12000 mm
35 × 1220 × 2440 mm
Reference dimensions: 35 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 817.88 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1220 × 2440 mm
35 × 1220 × 3050 mm
Reference dimensions: 35 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1022.34 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1220 × 3050 mm
35 × 1220 × 12000 mm
Reference dimensions: 35 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4022.34 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1220 × 12000 mm
35 × 1250 × 6000 mm
Reference dimensions: 35 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2060.62 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1250 × 6000 mm
35 × 1250 × 12000 mm
Reference dimensions: 35 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4121.25 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 35 × 1250 × 12000 mm
40 × 1000 × 6000 mm
Reference dimensions: 40 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1884 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1000 × 6000 mm
40 × 1000 × 12000 mm
Reference dimensions: 40 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3768 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1000 × 12000 mm
40 × 1220 × 6000 mm
Reference dimensions: 40 × 1220 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2298.48 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1220 × 6000 mm
40 × 1220 × 12000 mm
Reference dimensions: 40 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4596.96 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1220 × 12000 mm
40 × 1250 × 6000 mm
Reference dimensions: 40 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2355 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1250 × 6000 mm
40 × 1250 × 12000 mm
Reference dimensions: 40 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 1250 × 12000 mm
40 × 2000 × 6000 mm
Reference dimensions: 40 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 3768 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 2000 × 6000 mm
40 × 2000 × 12000 mm
Reference dimensions: 40 × 2000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 7536 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 40 × 2000 × 12000 mm
45 × 1000 × 6000 mm
Reference dimensions: 45 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2119.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1000 × 6000 mm
45 × 1000 × 12000 mm
Reference dimensions: 45 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4239 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1000 × 12000 mm
45 × 1220 × 6000 mm
Reference dimensions: 45 × 1220 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2585.79 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1220 × 6000 mm
45 × 1220 × 12000 mm
Reference dimensions: 45 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 5171.58 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1220 × 12000 mm
45 × 1250 × 6000 mm
Reference dimensions: 45 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2649.38 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1250 × 6000 mm
45 × 1250 × 12000 mm
Reference dimensions: 45 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 5298.75 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 45 × 1250 × 12000 mm
50 × 1000 × 6000 mm
Reference dimensions: 50 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2355 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1000 × 6000 mm
50 × 1000 × 12000 mm
Reference dimensions: 50 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1000 × 12000 mm
50 × 1220 × 6000 mm
Reference dimensions: 50 × 1220 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2873.1 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1220 × 6000 mm
50 × 1220 × 12000 mm
Reference dimensions: 50 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 5746.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1220 × 12000 mm
50 × 1250 × 6000 mm
Reference dimensions: 50 × 1250 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2943.75 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1250 × 6000 mm
50 × 1250 × 12000 mm
Reference dimensions: 50 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 5887.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 1250 × 12000 mm
50 × 2000 × 6000 mm
Reference dimensions: 50 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 2000 × 6000 mm
50 × 2000 × 12000 mm
Reference dimensions: 50 × 2000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 9420 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 2000 × 12000 mm
Heavy steel plate Prices and quotation requirements
For a price quotation, send the exact dimensions, complete grade and standard, total tonnes, delivery destination and required date. Confirm surface, inspection certificate, packaging, currency, delivery term and quotation validity. EMRA Steel confirms supply and commercial terms after reviewing the enquiry.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Heavy steel plate
Heavy steel plate S235JR
For Heavy steel plate S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate S275JR
For Heavy steel plate S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate S355J2
For Heavy steel plate S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
