Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Hot-rolled sheet and coil are used in fabrication and manufacturing; specify whether the order is sheet or coil.
Formed and welded components, tube-making feedstock and general fabrication. Match strength, bendability, scale condition and edge quality to the production route.
Hot-rolled sheet and coil Technical and buying guide
EMRA Steel
Hot-rolled sheet and coil for fabrication, forming and further processing. Specify thickness, width, surface condition and coil requirements.Read more
Standards and applicability
Distinguish structural grades to EN 10025-2 from DD11/DD12 forming grades to EN 10111; EN 10051 addresses the applicable hot-strip dimensional tolerances. DD11/DD12 mechanical references are restricted to 3–11 mm and transverse specimens, with A5 for thickness above 3 mm; a 12 mm request has no numeric DD mechanical values here. Specify coil or sheet, surface, edges, coil bore/mass and cut length separately.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S235JR
40 < t ≤ 63 mm
≥215
360–510
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
S355J2
40 < t ≤ 63 mm
≥335
470–630
—
27 J / −20°C
DD11
3 < t ≤ 11 mm
170–340
≤440
≥28 (A5)
—
DD12
3 < t ≤ 11 mm
170–320
≤420
≥30 (A5)
—
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
40 < t ≤ 63 mm
≤0.20
≤1.40
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
40 < t ≤ 63 mm
≤0.22
≤1.60
≤0.55
≤0.025
≤0.025
—
DD11
EN 10111
≤0.12
≤0.60
—
≤0.045
≤0.045
—
DD12
EN 10111
≤0.10
≤0.45
—
≤0.035
≤0.035
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Hot-rolled sheet and coil Technical and buying guide
Hot-rolled sheet and coil for fabrication, forming and further processing. Specify thickness, width, surface condition and coil requirements.
Specification and dimensions
Published hot-rolled reference thicknesses are 6, 8, 10 and 12 mm. Specify coil or cut-sheet form, width, length, surface and edge condition. Listed cut-sheet combinations include 2440, 3050 and 12000 mm lengths. Confirm dimensions, inspection and supply with the quotation. Cut lengths of 2440 and 3050 mm are listed only at 1220 mm width.
Grades and applicable standards
Structural enquiries may specify S235JR or S355J2 to EN 10025-2. Forming enquiries may specify DD11 or DD12 to EN 10111. EN 10051 addresses continuously hot-rolled strip and cut-sheet dimensional and shape tolerances; these standards serve different purposes.
Applications and project requirements
Formed and welded components, tube-making feedstock and general fabrication. Match strength, bendability, scale condition and edge quality to the production route.
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Hot-Rolled Sheet and Coil Price by Grade: S235JR, S355J2, DD11, DD12, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Hot-Rolled Sheet and Coil S235JR Price per Ton
S235JR (3 < t ≤ 16 mm): C 0.17 max, Mn 1.40 max, P 0.035 max, S 0.035 max; Re 235 MPa min, Rm 360–510 MPa, impact 27 J / +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Hot-Rolled Sheet and Coil S355J2 Quotation
Reference values for S355J2 (3 < t ≤ 16 mm): C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.025 max, S 0.025 max; Re 355 MPa min, Rm 470–630 MPa, impact 27 J / −20°C. Include packing and loading limits. Quotations are available for UAE.
Buy Hot-Rolled Sheet and Coil DD11 / DD12
DD11 / DD12: DD11 (EN 10111): C 0.12 max, Mn 0.60 max, P 0.045 max, S 0.045 max; 3 < t ≤ 11 mm: Re 170–340 MPa, Rm 440 MPa max, A 28 % min (A5); DD12 (EN 10111): C 0.10 max, Mn 0.45 max, P 0.035 max, S 0.035 max; 3 < t ≤ 11 mm: Re 170–320 MPa, Rm 420 MPa max, A 30 % min (A5). Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
Hot-Rolled Sheet and Coil St37, St44, St52 Price per Ton
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Send tonnage and size for a price. Enquiries from Georgia are quoted on a stated delivery basis.
Hot-Rolled Sheet and Coil Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Hot-Rolled Sheet and Coil to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with sheet or coil form, width and coil weight. See the Georgia market guide.
Hot-Rolled Sheet and Coil Price in Georgia
The Hot-Rolled Sheet and Coil price in Georgia depends on grade, quantity and the delivery basis, as well as sheet or coil form, width and coil weight. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Hot-Rolled Sheet and Coil Price in Tbilisi
For Hot-Rolled Sheet and Coil delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Hot-Rolled Sheet and Coil Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Hot-Rolled Sheet and Coil to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with sheet or coil form, width and coil weight. See the UAE market guide.
Hot-Rolled Sheet and Coil Price in UAE
The Hot-Rolled Sheet and Coil price in the UAE depends on grade, quantity and the delivery basis, as well as sheet or coil form, width and coil weight. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Hot-Rolled Sheet and Coil Price in Dubai
For Hot-Rolled Sheet and Coil delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Hot-Rolled Sheet and Coil: Price and Quotation by Destination
EMRA Steel quotes hot-rolled sheet and coils for nine destination markets. Each offer states grade, size, length, packing and whether the price is port-based or delivered to a named city.
Hot-Rolled Sheet and Coil Price in Turkmenistan
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Hot-Rolled Sheet and Coil in your request.
Hot-Rolled Sheet and Coil Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Hot-Rolled Sheet and Coil price.
Buy Hot-Rolled Sheet and Coil via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Hot-Rolled Sheet and Coil basis next to a delivered one.
Request Hot-Rolled Sheet and Coil Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Hot-Rolled Sheet and Coil in your request.
Request Hot-Rolled Sheet and Coil Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Hot-Rolled Sheet and Coil Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Request Hot-Rolled Sheet and Coil via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Hot-Rolled Sheet and Coil request.
Hot-Rolled Sheet and Coil for Qatar: Price and Offer
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Hot-Rolled Sheet and Coil.
Hot-Rolled Sheet and Coil Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Request Hot-Rolled Sheet and Coil via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Hot-Rolled Sheet and Coil request.
Buy Hot-Rolled Sheet and Coil for Oman
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Hot-Rolled Sheet and Coil.
Buy Hot-Rolled Sheet and Coil in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Hot-Rolled Sheet and Coil price.
Buy Hot-Rolled Sheet and Coil via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Hot-Rolled Sheet and Coil request.
Hot-Rolled Sheet and Coil Price in Kuwait
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Hot-Rolled Sheet and Coil.
Hot-Rolled Sheet and Coil Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Hot-Rolled Sheet and Coil price.
Hot-Rolled Sheet and Coil Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Hot-Rolled Sheet and Coil basis next to a delivered one.
Request Hot-Rolled Sheet and Coil Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Hot-Rolled Sheet and Coil in your request.
Request Hot-Rolled Sheet and Coil Offer for Tbilisi
Tbilisi enquiries go to our head office, so sizes, packing and loading can be agreed directly. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Hot-Rolled Sheet and Coil Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Buy Hot-Rolled Sheet and Coil via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Hot-Rolled Sheet and Coil request.
Hot-Rolled Sheet and Coil Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Hot-Rolled Sheet and Coil request.
Hot-Rolled Sheet and Coil for Armenia: Price and Offer
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Hot-Rolled Sheet and Coil in your request.
Hot-Rolled Sheet and Coil Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Buy Hot-Rolled Sheet and Coil for Azerbaijan
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Hot-Rolled Sheet and Coil in your request.
Buy Hot-Rolled Sheet and Coil in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Hot-Rolled Sheet and Coil price.
Hot-Rolled Sheet and Coil Price in Uzbekistan
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Hot-Rolled Sheet and Coil.
Hot-Rolled Sheet and Coil Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Hot-Rolled Sheet and Coil price.
Request Hot-Rolled Sheet and Coil Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Hot-Rolled Sheet and Coil tonnage.
Sizes, weights and quotation guidance
Dimensions are examples for preparing an enquiry, not a declared stock range. Calculated weights are theoretical; mill limits, rolling tolerances and the agreed weighing basis govern the order.
6 × 1000 mm
Reference thickness × width: 6 × 1000 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1000 mm
6 × 1000 × 12000 mm
Reference dimensions: 6 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 565.2 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1000 × 12000 mm
6 × 1220 mm
Reference thickness × width: 6 × 1220 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1220 mm
6 × 1220 × 2440 mm
Reference dimensions: 6 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 140.21 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 2440 mm
6 × 1220 × 3050 mm
Reference dimensions: 6 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 175.26 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 3050 mm
6 × 1220 × 12000 mm
Reference dimensions: 6 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 689.54 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1220 × 12000 mm
6 × 1250 mm
Reference thickness × width: 6 × 1250 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1250 mm
6 × 1250 × 12000 mm
Reference dimensions: 6 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 706.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1250 × 12000 mm
6 × 1500 mm
Reference thickness × width: 6 × 1500 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1500 mm
6 × 1500 × 12000 mm
Reference dimensions: 6 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 847.8 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 6 × 1500 × 12000 mm
8 × 1000 mm
Reference thickness × width: 8 × 1000 mm. Calculated mass is approximately 62.8 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 8 × 1000 mm
8 × 1000 × 12000 mm
Reference dimensions: 8 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 753.6 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1000 × 12000 mm
8 × 1220 mm
Reference thickness × width: 8 × 1220 mm. Calculated mass is approximately 62.8 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 8 × 1220 mm
8 × 1220 × 2440 mm
Reference dimensions: 8 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 186.94 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 2440 mm
8 × 1220 × 3050 mm
Reference dimensions: 8 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 233.68 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 3050 mm
8 × 1220 × 12000 mm
Reference dimensions: 8 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 919.39 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1220 × 12000 mm
8 × 1250 mm
Reference thickness × width: 8 × 1250 mm. Calculated mass is approximately 62.8 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 8 × 1250 mm
8 × 1250 × 12000 mm
Reference dimensions: 8 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 942 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1250 × 12000 mm
8 × 1500 mm
Reference thickness × width: 8 × 1500 mm. Calculated mass is approximately 62.8 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 8 × 1500 mm
8 × 1500 × 12000 mm
Reference dimensions: 8 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1130.4 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 8 × 1500 × 12000 mm
10 × 1000 mm
Reference thickness × width: 10 × 1000 mm. Calculated mass is approximately 78.5 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 10 × 1000 mm
10 × 1000 × 12000 mm
Reference dimensions: 10 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 942 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1000 × 12000 mm
10 × 1220 mm
Reference thickness × width: 10 × 1220 mm. Calculated mass is approximately 78.5 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 10 × 1220 mm
10 × 1220 × 2440 mm
Reference dimensions: 10 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 233.68 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 2440 mm
10 × 1220 × 3050 mm
Reference dimensions: 10 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 292.1 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 3050 mm
10 × 1220 × 12000 mm
Reference dimensions: 10 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1149.24 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1220 × 12000 mm
10 × 1250 mm
Reference thickness × width: 10 × 1250 mm. Calculated mass is approximately 78.5 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 10 × 1250 mm
10 × 1250 × 12000 mm
Reference dimensions: 10 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1177.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1250 × 12000 mm
10 × 1500 mm
Reference thickness × width: 10 × 1500 mm. Calculated mass is approximately 78.5 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 10 × 1500 mm
10 × 1500 × 12000 mm
Reference dimensions: 10 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 10 × 1500 × 12000 mm
12 × 1000 mm
Reference thickness × width: 12 × 1000 mm. Calculated mass is approximately 94.2 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 12 × 1000 mm
12 × 1000 × 12000 mm
Reference dimensions: 12 × 1000 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1130.4 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1000 × 12000 mm
12 × 1220 mm
Reference thickness × width: 12 × 1220 mm. Calculated mass is approximately 94.2 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 12 × 1220 mm
12 × 1220 × 2440 mm
Reference dimensions: 12 × 1220 × 2440 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 280.41 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 2440 mm
12 × 1220 × 3050 mm
Reference dimensions: 12 × 1220 × 3050 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 350.52 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 3050 mm
12 × 1220 × 12000 mm
Reference dimensions: 12 × 1220 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1379.09 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1220 × 12000 mm
12 × 1250 mm
Reference thickness × width: 12 × 1250 mm. Calculated mass is approximately 94.2 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 12 × 1250 mm
12 × 1250 × 12000 mm
Reference dimensions: 12 × 1250 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1413 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1250 × 12000 mm
12 × 1500 mm
Reference thickness × width: 12 × 1500 mm. Calculated mass is approximately 94.2 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 12 × 1500 mm
12 × 1500 × 12000 mm
Reference dimensions: 12 × 1500 × 12000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 1695.6 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 12 × 1500 × 12000 mm
Hot-rolled sheet and coil Prices and quotation requirements
For a price quotation, send the exact dimensions, complete grade and standard, total tonnes, delivery destination and required date. Confirm surface, inspection certificate, packaging, currency, delivery term and quotation validity. EMRA Steel confirms supply and commercial terms after reviewing the enquiry.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Hot-rolled sheet and coil
Hot-rolled sheet and coil S235JR
For Hot-rolled sheet and coil S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil S355J2
For Hot-rolled sheet and coil S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil DD11
For Hot-rolled sheet and coil DD11, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil DD12
For Hot-rolled sheet and coil DD12, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
