Request equal angle 150 × 150 × 12 mm (150x150x12). Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.
Equal Angle 150 × 150 × 12 mm: Quick Reference
Equal Angle 150 × 150 × 12 mm: Quick Reference
Parameter
Specification value
Leg dimensions (a × b)
150 × 150 mm
Nominal thickness (t)
12 mm
Geometric unit mass
27.130 kg/m
Section reference unit mass
27.300 kg/m
Enquiry lengths and calculated bar weights
6 m: 163.80 kg / 12 m: 327.60 kg
EN structural grade references
S235JR / S275JR / S355JR / S355J2
Legacy / regional grade enquiries
ST37 / ST52 / 5SP
Bar weights use the section reference where shown; otherwise they use the unrounded geometric mass. Values are estimates, not measured shipment weights. Lengths and grades require offer confirmation. Confirm dimensional-standard applicability for the requested section and manufacturing route. The existing image illustrates the product category.
Equal-leg angle 150 × 150 × 12 mm: each leg is 150 mm (15 cm) wide and the nominal leg thickness is 12 mm. Enquiry lengths: 6 m and 12 m, subject to supply confirmation. Reference mass: approximately 27.3 kg/m; calculated bar weights are 163.8 kg for 6 m and 327.6 kg for 12 m. Actual weight varies with rolling tolerances; confirm the supplier’s section table and weighing basis. 150 × 150 × 12 mm
Equal angles 150 × 150 × 12 mm Technical and buying guide
EMRA Steel
Request equal angle 150 × 150 × 12 mm. Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.Read more
The table shows size, geometric weight per metre, geometric weight per 12 m bar and guide/enquiry actions. Weights use nominal dimensions and density 7850 kg/m³, excluding radii and rolling tolerances. They are planning estimates, not certified shipment weights or stock confirmations.
Dimensions, Material Grade and Legacy Designations
EN 10056-1 addresses section dimensions and EN 10056-2 tolerances; EN 10025-2 addresses structural steel material requirements. Agree whether the requested size and manufacturing route fall within the chosen standard, especially for thin 2.5/3.5 mm enquiries. S235JR, S275JR, S355JR and S355J2 are distinct grade references, not confirmed stock. ST37, ST52 and 5SP need their complete specification, suffix, edition and acceptance requirements; no automatic EN equivalence or shared numerical chemistry is assigned.
Structural Grade Mechanical References
The following published section-grade references use EN 10025-2:2019. Yield values apply to nominal thickness t ≤ 16 mm; the displayed tensile and elongation values are restricted here to 3 ≤ t ≤ 15 mm. Do not apply them to the 2.5 mm catalogue entries without checking their applicable thickness range. Elongation uses L0 = 5.65√S0; confirm sampling, orientation and acceptance rules. The JR impact reference is 27 J at +20°C, while J2 is 27 J at −20°C. Impact testing, specimen size and applicability to thin sections must be agreed under the actual standard and order; the table does not certify a shipment or structural design.
Structural Grade Mechanical References
Grade
ReH min. (MPa), t ≤ 16 mm
Rm (MPa), 3 ≤ t ≤ 15 mm
A min. (%), 3 ≤ t ≤ 15 mm
Impact reference
S235JR
235
360–510
26
27 J / +20°C
S275JR
275
410–560
23
27 J / +20°C
S355JR
355
470–630
22
27 J / +20°C
S355J2
355
470–630
22
27 J / −20°C
Chemical Composition and CEV References
Selected ladle-analysis maxima below come from one published section-grade table referencing EN 10025-2:2019: carbon for t ≤ 16 mm and CEV for t ≤ 30 mm. Values are percentages by mass, not actual heat analysis, a complete normative specification or confirmed EMRA material. A dash for silicon means the reference sets no displayed general limit; it is not zero. Purchase requirements, product-analysis tolerances and the standard edition must be checked separately. For galvanizing category B, the reference requires separately agreed Si 0.14–0.25% and P ≤ 0.035%; do not assume galvanizing suitability from grade alone.
Chemical Composition and CEV References
Grade
C max. (%)
Mn max. (%)
Si max. (%)
P max. (%)
S max. (%)
CEV max. (%)
S235JR
0.17
1.40
—
0.040
0.040
0.35
S275JR
0.21
1.50
—
0.040
0.040
0.40
S355JR
0.24
1.60
0.55
0.040
0.040
0.45
S355J2
0.20
1.60
0.55
0.030
0.030
0.45
Compare the actual heat analysis and agreed test results with the mill inspection document. If EN 10204 type 3.1 is required, confirm document availability, heat traceability and test scope before ordering. CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15; weldability still requires the appropriate procedure and project acceptance.
Packing, Processing and Export Enquiries
Request bundle mass, strapping, lifting points, dunnage and corrosion protection for the actual shipment. Cutting, drilling, primer or hot-dip galvanizing must be specified and confirmed rather than assumed available. Include quantity, length, grade, dimensional acceptance, inspection documents and a named city or port. FOB names a shipment port; CFR/CIF name a destination port and DAP a destination place under Incoterms 2020. The regional sections retain Poti/Tbilisi, Jebel Ali/Dubai, Ambarlı/Istanbul, Shuwaikh/Shuaiba, Sohar/Muscat and Hamad Port/Doha; routing and unloading are subject to confirmation. Grade, size, processing, quantity, testing, packing and freight affect the quotation; no fixed unit price or universal bundle weight is promised.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Equal angles 150 × 150 × 12 mm
Equal-leg angle 150 × 150 × 12 mm: each leg is 150 mm (15 cm) wide and the nominal leg thickness is 12 mm. Enquiry lengths: 6 m and 12 m, subject to supply confirmation. Reference mass: approximately 27.3 kg/m; calculated bar weights are 163.8 kg for 6 m and 327.6 kg for 12 m. Actual weight varies with rolling tolerances; confirm the supplier’s section table and weighing basis. 150 × 150 × 12 mm
Equal Angle 150 × 150 × 12 mm Price by Grade: S235JR to 5SP
The values below come from this page's reference tables and are not guaranteed; state the full standard designation and edition when you ask for a price.
Buy Equal Angle 150 × 150 × 12 mm S235JR
S235JR carries C 0.17 max and Mn 1.40 max with a 235 MPa minimum yield, a common choice for general framing. Name the standard and edition in the enquiry. It can be quoted for Georgia buyers.
Equal Angle 150 × 150 × 12 mm S275JR Price per Ton
For higher strength, S275JR (C 0.21 max, Mn 1.50 max, ReH min 275 MPa) is the next step. Send tonnage and bar length for a price. Enquiries from Azerbaijan are quoted on a stated delivery basis.
S355JR (C 0.24 max, Mn 1.60 max, Si 0.55 max, ReH min 355 MPa) is chosen where a higher-strength angle is specified. State tonnage and the receiving city or port. Quotations are available for Turkmenistan.
Buy Equal Angle 150 × 150 × 12 mm S355J2
S355J2 keeps the 355 MPa yield with tighter P and S at 0.030 max (C 0.20 max, Mn 1.60 max, Si 0.55 max) and a 27 J impact reference at −20°C. Include bundle and loading limits. It can be quoted for Qatar buyers.
Equal Angle 150 × 150 × 12 mm ST37 Price per Ton
ST37 refers to the St37-2 / 1.0037 reference, C 0.17 max with P and S 0.050 max. Name the standard and edition in the enquiry. Enquiries from Kuwait are quoted on a stated delivery basis.
St52-3 / 1.0570 is the historical reference behind ST52: C 0.20 max, Mn 1.60 max, Si 0.55 max. Send tonnage and bar length for a price. Quotations are available for Armenia.
Buy Equal Angle 150 × 150 × 12 mm 5SP
5SP is a regional designation with no limits tabulated on this page, so state the exact standard and chemistry you need. State tonnage and the receiving city or port. It can be quoted for Uzbekistan buyers.
Choosing this specification
For 150 × 150 × 12 mm, both leg dimensions and thickness must match the connection drawing. Check hole position, edge distances and root geometry against the specified section table; a larger leg does not alone establish connection capacity. At nominal geometry and 7850 kg/m³ steel density, the reference is 27.130 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 150 × 150 × 10 mm, the nominal geometric reference is 19.2% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Equal angles
Equal Angle 150 × 150 × 12 mm S355J2 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Equal Angle 150 × 150 × 12 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 150 × 150 × 12 mm ST37 Price in Georgia
The Equal Angle 150 × 150 × 12 mm price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Equal Angle 150 × 150 × 12 mm ST52 Price in Tbilisi
For Equal Angle 150 × 150 × 12 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Equal Angle 150 × 150 × 12 mm 5SP Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Equal Angle 150 × 150 × 12 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 150 × 150 × 12 mm S235JR Price in UAE
The Equal Angle 150 × 150 × 12 mm price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Equal Angle 150 × 150 × 12 mm S275JR Price in Dubai
For Equal Angle 150 × 150 × 12 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Equal Angle 150 × 150 × 12 mm: Price and Quotation by Destination
Equal angle 150 × 150 × 12 mm weighs 27.130 kg/m by geometry and 27.300 kg/m by section reference; a 12 m bar is 327.60 kg on the reference mass. Send grade, tonnage and bar length, and name the city or port you want the price for.
Equal Angle 150 × 150 × 12 mm for Georgia: Price and Offer
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Equal Angle 150 × 150 × 12 mm Quotation for Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Buy Equal Angle 150 × 150 × 12 mm in Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Buy Equal Angle 150 × 150 × 12 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of long bars. Name the terminal and discharge terms in your Equal Angle 150 × 150 × 12 mm request.
Equal Angle 150 × 150 × 12 mm Price via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Ask for a port-based Equal Angle 150 × 150 × 12 mm basis next to a delivered one.
Equal Angle 150 × 150 × 12 mm S235JR Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Buy Equal Angle 150 × 150 × 12 mm in Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Equal Angle 150 × 150 × 12 mm S355J2 Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Equal Angle 150 × 150 × 12 mm Price in Baku
A Baku quotation can use a handover near the city or delivery to your site. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Equal Angle 150 × 150 × 12 mm ST37 Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and bar length together with the rail or road leg. See the Uzbekistan destination guide. Name the grade and tonnage for Equal Angle 150 × 150 × 12 mm in your request.
Request Equal Angle 150 × 150 × 12 mm Offer for Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for 12 m bars. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Equal Angle 150 × 150 × 12 mm Quotation for Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Equal Angle 150 × 150 × 12 mm S275JR Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Equal Angle 150 × 150 × 12 mm in your request.
Equal Angle 150 × 150 × 12 mm Quotation for Ashgabat
An Ashgabat offer names the handover and the documents required. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Buy Equal Angle 150 × 150 × 12 mm via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Name the terminal and discharge terms in your Equal Angle 150 × 150 × 12 mm request.
Buy Equal Angle 150 × 150 × 12 mm for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Equal Angle 150 × 150 × 12 mm in your request.
Buy Equal Angle 150 × 150 × 12 mm in Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Equal Angle 150 × 150 × 12 mm Price in Sharjah
A Sharjah offer lists the road leg and who handles unloading. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Request Equal Angle 150 × 150 × 12 mm via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Ask for a port-based Equal Angle 150 × 150 × 12 mm basis next to a delivered one.
Equal Angle 150 × 150 × 12 mm ST52 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Equal Angle 150 × 150 × 12 mm Price in Doha
For Doha the delivery basis and required paperwork are stated with the price. Name the unloading equipment when you ask for the Equal Angle 150 × 150 × 12 mm price.
Request Equal Angle 150 × 150 × 12 mm via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Ask for a port-based Equal Angle 150 × 150 × 12 mm basis next to a delivered one.
Equal Angle 150 × 150 × 12 mm 5SP Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Request Equal Angle 150 × 150 × 12 mm Offer for Muscat
Muscat offers state the discharge port and terms before the price. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Buy Equal Angle 150 × 150 × 12 mm via Sohar
A Sohar offer names the terminal basis and the discharge scope. Ask for a port-based Equal Angle 150 × 150 × 12 mm basis next to a delivered one.
Equal Angle 150 × 150 × 12 mm S355JR Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Equal Angle 150 × 150 × 12 mm.
Equal Angle 150 × 150 × 12 mm Quotation for Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Send the receiving address with your Equal Angle 150 × 150 × 12 mm tonnage.
Equal Angle 150 × 150 × 12 mm Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Name the terminal and discharge terms in your Equal Angle 150 × 150 × 12 mm request.
Buying Equal angles 150 × 150 × 12 mm and requesting a price
The price for Equal angles 150 × 150 × 12 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Equal angles 150 × 150 × 12 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Equal angles 150 × 150 × 12 mm
Include Equal angles 150 × 150 × 12 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Equal angles 150 × 150 × 12 mm
Equal angles 150 × 150 × 12 mm S235JR
For Equal angles 150 × 150 × 12 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm S275JR
For Equal angles 150 × 150 × 12 mm S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm S355JR
For Equal angles 150 × 150 × 12 mm S355JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm S355J2
For Equal angles 150 × 150 × 12 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm ST37
For Equal angles 150 × 150 × 12 mm ST37, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm ST52
For Equal angles 150 × 150 × 12 mm ST52, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 150 × 150 × 12 mm 5SP
For Equal angles 150 × 150 × 12 mm 5SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
