Review Equal angles for the 40 × 40 × 3 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Equal-leg angle 40 × 40 × 3 mm: each leg is 40 mm (4 cm) wide and the nominal leg thickness is 3 mm. Enquiry lengths: 6 m and 12 m, subject to supply confirmation. Reference mass: approximately 1.85 kg/m; calculated bar weights are 11.1 kg for 6 m and 22.2 kg for 12 m. Actual weight varies with rolling tolerances; confirm the supplier’s section table and weighing basis. Equal angles 40 × 40 × 3 mm
Equal angles 40 × 40 × 3 mm Technical and buying guide
EMRA Steel
Review Equal angles for the 40 × 40 × 3 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Read more
Size specifications: Equal angles 40 × 40 × 3 mm
Equal-leg angle 40 × 40 × 3 mm: each leg is 40 mm (4 cm) wide and the nominal leg thickness is 3 mm. Enquiry lengths: 6 m and 12 m, subject to supply confirmation. Reference mass: approximately 1.85 kg/m; calculated bar weights are 11.1 kg for 6 m and 22.2 kg for 12 m. Actual weight varies with rolling tolerances; confirm the supplier’s section table and weighing basis. Equal angles 40 × 40 × 3 mm
Specification and dimensions
Equal angles: leg a × leg b × thickness, followed by length. Example: 40 × 40 × 3 mm, 6 m. For an equal angle the two legs are equal; specify the size standard and tolerances.
Grades and applicable standards
Reference standards: EN 10056-1 / EN 10056-2 / EN 10025-2. State the complete material grade and standard edition separately. Dimensional standards do not establish grade equivalence. For structural steel enquiries, S235JR or S355JR may be specified where appropriate to the governing material specification; other applications require their own agreed grade.
Applications and project requirements
Equal angles are used in bracing, frames, towers and fabricated connections subject to the project design. Specify hole patterns, cutting and galvanizing requirements where applicable.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Specify EN 10056-1 for dimensions and EN 10056-2 for tolerances. Material enquiries may specify S235JR, S275JR or S355J2 to EN 10025-2, subject to confirmation. For requests using ST37/ST52, DIN 17100, 5SP or ISIRI 13968-1, provide the complete grade, applicable standard and edition, and required inspection certificate; these designations are not automatically interchangeable or confirmation of EMRA Steel stock.
Buying Equal angles 40 × 40 × 3 mm and requesting a price
The price for Equal angles 40 × 40 × 3 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Equal angles 40 × 40 × 3 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Equal angles 40 × 40 × 3 mm
Include Equal angles 40 × 40 × 3 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
