Request equal angle 50 × 50 × 2.5 mm (50x50x2.5). Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.
Equal Angle 50 × 50 × 2.5 mm: Quick Reference
Equal Angle 50 × 50 × 2.5 mm: Quick Reference
Parameter
Specification value
Leg dimensions (a × b)
50 × 50 mm
Nominal thickness (t)
2.5 mm
Geometric unit mass
1.913 kg/m
Section reference unit mass
—
Enquiry lengths and calculated bar weights
6 m: 11.48 kg / 12 m: 22.96 kg
EN structural grade references
S235JR / S275JR / S355JR / S355J2
Legacy / regional grade enquiries
ST37 / ST52 / 5SP
Bar weights use the section reference where shown; otherwise they use the unrounded geometric mass. Values are estimates, not measured shipment weights. Lengths and grades require offer confirmation. Confirm dimensional-standard applicability for the requested section and manufacturing route. The existing image illustrates the product category.
Equal-leg angle 50 × 50 × 2.5 mm: each leg is 50 mm (5 cm) wide and the requested thickness is 2.5 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Geometric mass estimate: 1.913 kg/m, or 11.48 kg for 6 m and 22.96 kg for 12 m, using steel density 7850 kg/m³ and nominal area t × (2a − t). This estimate excludes root and toe radii and rolling tolerances; it is not a mill section-table weight. Confirm the size, manufacturing route, applicable dimensional standard and actual weighing basis with the quotation. 50 × 50 × 2.5 mm
Equal angles 50 × 50 × 2.5 mm Technical and buying guide
EMRA Steel
Request equal angle 50 × 50 × 2.5 mm. Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.Read more
The table shows size, geometric weight per metre, geometric weight per 12 m bar and guide/enquiry actions. Weights use nominal dimensions and density 7850 kg/m³, excluding radii and rolling tolerances. They are planning estimates, not certified shipment weights or stock confirmations.
Dimensions, Material Grade and Legacy Designations
EN 10056-1 addresses section dimensions and EN 10056-2 tolerances; EN 10025-2 addresses structural steel material requirements. Agree whether the requested size and manufacturing route fall within the chosen standard, especially for thin 2.5/3.5 mm enquiries. S235JR, S275JR, S355JR and S355J2 are distinct grade references, not confirmed stock. ST37, ST52 and 5SP need their complete specification, suffix, edition and acceptance requirements; no automatic EN equivalence or shared numerical chemistry is assigned.
Structural Grade Mechanical References
The following published section-grade references use EN 10025-2:2019. Yield values apply to nominal thickness t ≤ 16 mm; the displayed tensile and elongation values are restricted here to 3 ≤ t ≤ 15 mm. Do not apply them to the 2.5 mm catalogue entries without checking their applicable thickness range. Elongation uses L0 = 5.65√S0; confirm sampling, orientation and acceptance rules. The JR impact reference is 27 J at +20°C, while J2 is 27 J at −20°C. Impact testing, specimen size and applicability to thin sections must be agreed under the actual standard and order; the table does not certify a shipment or structural design.
This 2.5 mm section is outside the displayed 3–15 mm tensile/elongation band. Those cells are intentionally blank; request the applicable thickness-specific requirements before ordering.
Structural Grade Mechanical References
Grade
ReH min. (MPa), t ≤ 16 mm
Rm (MPa), 3 ≤ t ≤ 15 mm
A min. (%), 3 ≤ t ≤ 15 mm
Impact reference
S235JR
235
—
—
27 J / +20°C
S275JR
275
—
—
27 J / +20°C
S355JR
355
—
—
27 J / +20°C
S355J2
355
—
—
27 J / −20°C
Chemical Composition and CEV References
Selected ladle-analysis maxima below come from one published section-grade table referencing EN 10025-2:2019: carbon for t ≤ 16 mm and CEV for t ≤ 30 mm. Values are percentages by mass, not actual heat analysis, a complete normative specification or confirmed EMRA material. A dash for silicon means the reference sets no displayed general limit; it is not zero. Purchase requirements, product-analysis tolerances and the standard edition must be checked separately. For galvanizing category B, the reference requires separately agreed Si 0.14–0.25% and P ≤ 0.035%; do not assume galvanizing suitability from grade alone.
Chemical Composition and CEV References
Grade
C max. (%)
Mn max. (%)
Si max. (%)
P max. (%)
S max. (%)
CEV max. (%)
S235JR
0.17
1.40
—
0.040
0.040
0.35
S275JR
0.21
1.50
—
0.040
0.040
0.40
S355JR
0.24
1.60
0.55
0.040
0.040
0.45
S355J2
0.20
1.60
0.55
0.030
0.030
0.45
Compare the actual heat analysis and agreed test results with the mill inspection document. If EN 10204 type 3.1 is required, confirm document availability, heat traceability and test scope before ordering. CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15; weldability still requires the appropriate procedure and project acceptance.
Packing, Processing and Export Enquiries
Request bundle mass, strapping, lifting points, dunnage and corrosion protection for the actual shipment. Cutting, drilling, primer or hot-dip galvanizing must be specified and confirmed rather than assumed available. Include quantity, length, grade, dimensional acceptance, inspection documents and a named city or port. FOB names a shipment port; CFR/CIF name a destination port and DAP a destination place under Incoterms 2020. The regional sections retain Poti/Tbilisi, Jebel Ali/Dubai, Ambarlı/Istanbul, Shuwaikh/Shuaiba, Sohar/Muscat and Hamad Port/Doha; routing and unloading are subject to confirmation. Grade, size, processing, quantity, testing, packing and freight affect the quotation; no fixed unit price or universal bundle weight is promised.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Equal angles 50 × 50 × 2.5 mm
Equal-leg angle 50 × 50 × 2.5 mm: each leg is 50 mm (5 cm) wide and the requested thickness is 2.5 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Geometric mass estimate: 1.913 kg/m, or 11.48 kg for 6 m and 22.96 kg for 12 m, using steel density 7850 kg/m³ and nominal area t × (2a − t). This estimate excludes root and toe radii and rolling tolerances; it is not a mill section-table weight. Confirm the size, manufacturing route, applicable dimensional standard and actual weighing basis with the quotation. 50 × 50 × 2.5 mm
Equal Angle 50 × 50 × 2.5 mm Price by Grade: S235JR to 5SP
Limits are published reference values from this page's tables, not guaranteed values; confirm the full standard designation in your enquiry.
Equal Angle 50 × 50 × 2.5 mm S235JR Price per Ton
S235JR is the base structural grade here (C 0.17 max, Mn 1.40 max, ReH min 235 MPa) and the usual starting point for ordinary structural work. Send tonnage and bar length for a price. Enquiries from Uzbekistan are quoted on a stated delivery basis.
S275JR raises the limits to C 0.21 max and Mn 1.50 max with ReH min 275 MPa for more demanding frames. State tonnage and the receiving city or port. Quotations are available for UAE.
Buy Equal Angle 50 × 50 × 2.5 mm S355JR
S355JR combines ReH min 355 MPa with C 0.24 max, Mn 1.60 max and Si 0.55 max; the impact reference is 27 J at +20°C. Include bundle and loading limits. It can be quoted for Oman buyers.
Equal Angle 50 × 50 × 2.5 mm S355J2 Price per Ton
Choose S355J2 when low-temperature impact matters: 27 J at −20°C, C 0.20 max, Mn 1.60 max, Si 0.55 max, P and S 0.030 max. Name the standard and edition in the enquiry. Enquiries from Georgia are quoted on a stated delivery basis.
ST37 is enquired as St37-2 / 1.0037 (C 0.17 max, P and S 0.050 max), a historical designation. Send tonnage and bar length for a price. Quotations are available for Azerbaijan.
Buy Equal Angle 50 × 50 × 2.5 mm ST52
ST52 is enquired as St52-3 / 1.0570 (C 0.20 max, Mn 1.60 max, Si 0.55 max, P and S 0.040 max). State tonnage and the receiving city or port. It can be quoted for Turkmenistan buyers.
Equal Angle 50 × 50 × 2.5 mm 5SP Price per Ton
No chemical limits are listed here for 5SP; send the standard designation and required analysis with the enquiry. Include bundle and loading limits. Enquiries from Qatar are quoted on a stated delivery basis.
Choosing this specification
For 50 × 50 × 2.5 mm, both leg dimensions and thickness must match the connection drawing. Check hole position, edge distances and root geometry against the specified section table; a larger leg does not alone establish connection capacity. At nominal geometry and 7850 kg/m³ steel density, the reference is 1.913 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 50 × 50 × 3 mm, the nominal geometric reference is 16.2% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Equal angles
Equal Angle 50 × 50 × 2.5 mm S355JR Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Equal Angle 50 × 50 × 2.5 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 50 × 50 × 2.5 mm S355J2 Price in Georgia
The Equal Angle 50 × 50 × 2.5 mm price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Equal Angle 50 × 50 × 2.5 mm ST37 Price in Tbilisi
For Equal Angle 50 × 50 × 2.5 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Equal Angle 50 × 50 × 2.5 mm ST52 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Equal Angle 50 × 50 × 2.5 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 50 × 50 × 2.5 mm 5SP Price in UAE
The Equal Angle 50 × 50 × 2.5 mm price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Equal Angle 50 × 50 × 2.5 mm S235JR Price in Dubai
For Equal Angle 50 × 50 × 2.5 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Equal Angle 50 × 50 × 2.5 mm: Price and Quotation by Destination
Equal angle 50 × 50 × 2.5 mm weighs 1.913 kg/m by geometry; a 12 m bar is 22.96 kg on that basis. Send grade, tonnage and bar length, and name the city or port you want the price for.
Equal Angle 50 × 50 × 2.5 mm S355J2 Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and bar length together with the rail or road leg. See the Uzbekistan destination guide. Send tonnage, grade and the delivery point for Equal Angle 50 × 50 × 2.5 mm.
Buy Equal Angle 50 × 50 × 2.5 mm in Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for 12 m bars. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Equal Angle 50 × 50 × 2.5 mm Price in Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Equal Angle 50 × 50 × 2.5 mm S235JR Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Send tonnage, grade and the delivery point for Equal Angle 50 × 50 × 2.5 mm.
Equal Angle 50 × 50 × 2.5 mm Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Equal Angle 50 × 50 × 2.5 mm Price via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Equal Angle 50 × 50 × 2.5 mm basis next to a delivered one.
Request Equal Angle 50 × 50 × 2.5 mm Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Equal Angle 50 × 50 × 2.5 mm in your request.
Request Equal Angle 50 × 50 × 2.5 mm Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Equal Angle 50 × 50 × 2.5 mm Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Buy Equal Angle 50 × 50 × 2.5 mm via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Equal Angle 50 × 50 × 2.5 mm request.
Equal Angle 50 × 50 × 2.5 mm ST37 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Name the grade and tonnage for Equal Angle 50 × 50 × 2.5 mm in your request.
Equal Angle 50 × 50 × 2.5 mm Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Buy Equal Angle 50 × 50 × 2.5 mm via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Equal Angle 50 × 50 × 2.5 mm request.
Equal Angle 50 × 50 × 2.5 mm ST52 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Name the grade and tonnage for Equal Angle 50 × 50 × 2.5 mm in your request.
Buy Equal Angle 50 × 50 × 2.5 mm in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Equal Angle 50 × 50 × 2.5 mm Price via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Equal Angle 50 × 50 × 2.5 mm request.
Equal Angle 50 × 50 × 2.5 mm S275JR Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Equal Angle 50 × 50 × 2.5 mm.
Equal Angle 50 × 50 × 2.5 mm Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Request Equal Angle 50 × 50 × 2.5 mm via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Equal Angle 50 × 50 × 2.5 mm basis next to a delivered one.
Request Equal Angle 50 × 50 × 2.5 mm Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Send tonnage, grade and the delivery point for Equal Angle 50 × 50 × 2.5 mm.
Request Equal Angle 50 × 50 × 2.5 mm Offer for Tbilisi
Tbilisi enquiries go to our head office, so bar lengths, bundling and loading can be agreed directly. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Equal Angle 50 × 50 × 2.5 mm Quotation for Kutaisi
Kutaisi offers separate the bar price from the road freight. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Equal Angle 50 × 50 × 2.5 mm Price via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Equal Angle 50 × 50 × 2.5 mm request.
Request Equal Angle 50 × 50 × 2.5 mm via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Equal Angle 50 × 50 × 2.5 mm request.
Equal Angle 50 × 50 × 2.5 mm 5SP Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Send tonnage, grade and the delivery point for Equal Angle 50 × 50 × 2.5 mm.
Equal Angle 50 × 50 × 2.5 mm Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the bar price. Send the receiving address with your Equal Angle 50 × 50 × 2.5 mm tonnage.
Equal Angle 50 × 50 × 2.5 mm S355JR Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Equal Angle 50 × 50 × 2.5 mm in your request.
Buy Equal Angle 50 × 50 × 2.5 mm in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Equal Angle 50 × 50 × 2.5 mm price.
Buying Equal angles 50 × 50 × 2.5 mm and requesting a price
The price for Equal angles 50 × 50 × 2.5 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Equal angles 50 × 50 × 2.5 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Equal angles 50 × 50 × 2.5 mm
Include Equal angles 50 × 50 × 2.5 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Equal angles 50 × 50 × 2.5 mm
Equal angles 50 × 50 × 2.5 mm S235JR
For Equal angles 50 × 50 × 2.5 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm S275JR
For Equal angles 50 × 50 × 2.5 mm S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm S355JR
For Equal angles 50 × 50 × 2.5 mm S355JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm S355J2
For Equal angles 50 × 50 × 2.5 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm ST37
For Equal angles 50 × 50 × 2.5 mm ST37, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm ST52
For Equal angles 50 × 50 × 2.5 mm ST52, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 50 × 50 × 2.5 mm 5SP
For Equal angles 50 × 50 × 2.5 mm 5SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
