Request equal angle 80 × 80 × 6 mm (80x80x6). Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.
Equal Angle 80 × 80 × 6 mm: Quick Reference
Equal Angle 80 × 80 × 6 mm: Quick Reference
Parameter
Specification value
Leg dimensions (a × b)
80 × 80 mm
Nominal thickness (t)
6 mm
Geometric unit mass
7.253 kg/m
Section reference unit mass
—
Enquiry lengths and calculated bar weights
6 m: 43.52 kg / 12 m: 87.04 kg
EN structural grade references
S235JR / S275JR / S355JR / S355J2
Legacy / regional grade enquiries
ST37 / ST52 / 5SP
Bar weights use the section reference where shown; otherwise they use the unrounded geometric mass. Values are estimates, not measured shipment weights. Lengths and grades require offer confirmation. Confirm dimensional-standard applicability for the requested section and manufacturing route. The existing image illustrates the product category.
Equal-leg angle 80 × 80 × 6 mm: each leg is 80 mm (8 cm) wide and the requested thickness is 6 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Geometric mass estimate: 7.253 kg/m, or 43.52 kg for 6 m and 87.04 kg for 12 m, using steel density 7850 kg/m³ and nominal area t × (2a − t). This estimate excludes root and toe radii and rolling tolerances; it is not a mill section-table weight. Confirm the size, manufacturing route, applicable dimensional standard and actual weighing basis with the quotation. 80 × 80 × 6 mm
Equal angles 80 × 80 × 6 mm Technical and buying guide
EMRA Steel
Request equal angle 80 × 80 × 6 mm. Specify the full material grade, dimensional standard, length, quantity and destination. The tables distinguish calculated geometric weights from stored section references; material, manufacturing route, inspection documents and supply are confirmed with the offer.Read more
The table shows size, geometric weight per metre, geometric weight per 12 m bar and guide/enquiry actions. Weights use nominal dimensions and density 7850 kg/m³, excluding radii and rolling tolerances. They are planning estimates, not certified shipment weights or stock confirmations.
Dimensions, Material Grade and Legacy Designations
EN 10056-1 addresses section dimensions and EN 10056-2 tolerances; EN 10025-2 addresses structural steel material requirements. Agree whether the requested size and manufacturing route fall within the chosen standard, especially for thin 2.5/3.5 mm enquiries. S235JR, S275JR, S355JR and S355J2 are distinct grade references, not confirmed stock. ST37, ST52 and 5SP need their complete specification, suffix, edition and acceptance requirements; no automatic EN equivalence or shared numerical chemistry is assigned.
Structural Grade Mechanical References
The following published section-grade references use EN 10025-2:2019. Yield values apply to nominal thickness t ≤ 16 mm; the displayed tensile and elongation values are restricted here to 3 ≤ t ≤ 15 mm. Do not apply them to the 2.5 mm catalogue entries without checking their applicable thickness range. Elongation uses L0 = 5.65√S0; confirm sampling, orientation and acceptance rules. The JR impact reference is 27 J at +20°C, while J2 is 27 J at −20°C. Impact testing, specimen size and applicability to thin sections must be agreed under the actual standard and order; the table does not certify a shipment or structural design.
Structural Grade Mechanical References
Grade
ReH min. (MPa), t ≤ 16 mm
Rm (MPa), 3 ≤ t ≤ 15 mm
A min. (%), 3 ≤ t ≤ 15 mm
Impact reference
S235JR
235
360–510
26
27 J / +20°C
S275JR
275
410–560
23
27 J / +20°C
S355JR
355
470–630
22
27 J / +20°C
S355J2
355
470–630
22
27 J / −20°C
Chemical Composition and CEV References
Selected ladle-analysis maxima below come from one published section-grade table referencing EN 10025-2:2019: carbon for t ≤ 16 mm and CEV for t ≤ 30 mm. Values are percentages by mass, not actual heat analysis, a complete normative specification or confirmed EMRA material. A dash for silicon means the reference sets no displayed general limit; it is not zero. Purchase requirements, product-analysis tolerances and the standard edition must be checked separately. For galvanizing category B, the reference requires separately agreed Si 0.14–0.25% and P ≤ 0.035%; do not assume galvanizing suitability from grade alone.
Chemical Composition and CEV References
Grade
C max. (%)
Mn max. (%)
Si max. (%)
P max. (%)
S max. (%)
CEV max. (%)
S235JR
0.17
1.40
—
0.040
0.040
0.35
S275JR
0.21
1.50
—
0.040
0.040
0.40
S355JR
0.24
1.60
0.55
0.040
0.040
0.45
S355J2
0.20
1.60
0.55
0.030
0.030
0.45
Compare the actual heat analysis and agreed test results with the mill inspection document. If EN 10204 type 3.1 is required, confirm document availability, heat traceability and test scope before ordering. CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15; weldability still requires the appropriate procedure and project acceptance.
Packing, Processing and Export Enquiries
Request bundle mass, strapping, lifting points, dunnage and corrosion protection for the actual shipment. Cutting, drilling, primer or hot-dip galvanizing must be specified and confirmed rather than assumed available. Include quantity, length, grade, dimensional acceptance, inspection documents and a named city or port. FOB names a shipment port; CFR/CIF name a destination port and DAP a destination place under Incoterms 2020. The regional sections retain Poti/Tbilisi, Jebel Ali/Dubai, Ambarlı/Istanbul, Shuwaikh/Shuaiba, Sohar/Muscat and Hamad Port/Doha; routing and unloading are subject to confirmation. Grade, size, processing, quantity, testing, packing and freight affect the quotation; no fixed unit price or universal bundle weight is promised.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Equal angles 80 × 80 × 6 mm
Equal-leg angle 80 × 80 × 6 mm: each leg is 80 mm (8 cm) wide and the requested thickness is 6 mm. Enquiry lengths: 6 m and 12 m, subject to confirmation. Geometric mass estimate: 7.253 kg/m, or 43.52 kg for 6 m and 87.04 kg for 12 m, using steel density 7850 kg/m³ and nominal area t × (2a − t). This estimate excludes root and toe radii and rolling tolerances; it is not a mill section-table weight. Confirm the size, manufacturing route, applicable dimensional standard and actual weighing basis with the quotation. 80 × 80 × 6 mm
Equal Angle 80 × 80 × 6 mm Price by Grade: S235JR to 5SP
The values below come from this page's reference tables and are not guaranteed; state the full standard designation and edition when you ask for a price.
Buy Equal Angle 80 × 80 × 6 mm S235JR
S235JR carries C 0.17 max and Mn 1.40 max with a 235 MPa minimum yield, a common choice for general framing. Name the standard and edition in the enquiry. It can be quoted for Georgia buyers.
Equal Angle 80 × 80 × 6 mm S275JR Price per Ton
For higher strength, S275JR (C 0.21 max, Mn 1.50 max, ReH min 275 MPa) is the next step. Send tonnage and bar length for a price. Enquiries from Azerbaijan are quoted on a stated delivery basis.
S355JR (C 0.24 max, Mn 1.60 max, Si 0.55 max, ReH min 355 MPa) is chosen where a higher-strength angle is specified. State tonnage and the receiving city or port. Quotations are available for Turkmenistan.
Buy Equal Angle 80 × 80 × 6 mm S355J2
S355J2 keeps the 355 MPa yield with tighter P and S at 0.030 max (C 0.20 max, Mn 1.60 max, Si 0.55 max) and a 27 J impact reference at −20°C. Include bundle and loading limits. It can be quoted for Qatar buyers.
Equal Angle 80 × 80 × 6 mm ST37 Price per Ton
ST37 refers to the St37-2 / 1.0037 reference, C 0.17 max with P and S 0.050 max. Name the standard and edition in the enquiry. Enquiries from Kuwait are quoted on a stated delivery basis.
Request Equal Angle 80 × 80 × 6 mm ST52 Quotation
St52-3 / 1.0570 is the historical reference behind ST52: C 0.20 max, Mn 1.60 max, Si 0.55 max. Send tonnage and bar length for a price. Quotations are available for Armenia.
Buy Equal Angle 80 × 80 × 6 mm 5SP
5SP is a regional designation with no limits tabulated on this page, so state the exact standard and chemistry you need. State tonnage and the receiving city or port. It can be quoted for Uzbekistan buyers.
Choosing this specification
For 80 × 80 × 6 mm, both leg dimensions and thickness must match the connection drawing. Check hole position, edge distances and root geometry against the specified section table; a larger leg does not alone establish connection capacity. At nominal geometry and 7850 kg/m³ steel density, the reference is 7.253 kg per metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 75 × 75 × 6 mm, the nominal geometric reference is 6.9% higher on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Equal angles
Equal Angle 80 × 80 × 6 mm 5SP Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Equal Angle 80 × 80 × 6 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 80 × 80 × 6 mm S235JR Price in Georgia
The Equal Angle 80 × 80 × 6 mm price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Equal Angle 80 × 80 × 6 mm S275JR Price in Tbilisi
For Equal Angle 80 × 80 × 6 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Equal Angle 80 × 80 × 6 mm S355JR Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Equal Angle 80 × 80 × 6 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR, S355JR, S355J2, ST37, ST52 and 5SP.
Equal Angle 80 × 80 × 6 mm S355J2 Price in UAE
The Equal Angle 80 × 80 × 6 mm price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Equal Angle 80 × 80 × 6 mm ST37 Price in Dubai
For Equal Angle 80 × 80 × 6 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Equal Angle 80 × 80 × 6 mm: Price and Quotation by Destination
Equal angle 80 × 80 × 6 mm weighs 7.253 kg/m by geometry; a 12 m bar is 87.04 kg on that basis. Send grade, tonnage and bar length, and name the city or port you want the price for.
Equal Angle 80 × 80 × 6 mm S355J2 Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Equal Angle 80 × 80 × 6 mm Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the bar price. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Equal Angle 80 × 80 × 6 mm 5SP Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Buy Equal Angle 80 × 80 × 6 mm in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Equal Angle 80 × 80 × 6 mm S235JR Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Equal Angle 80 × 80 × 6 mm Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Request Equal Angle 80 × 80 × 6 mm Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Equal Angle 80 × 80 × 6 mm ST37 Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Name the grade and tonnage for Equal Angle 80 × 80 × 6 mm in your request.
Request Equal Angle 80 × 80 × 6 mm Offer for Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Request Equal Angle 80 × 80 × 6 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Ask for a port-based Equal Angle 80 × 80 × 6 mm basis next to a delivered one.
Equal Angle 80 × 80 × 6 mm for UAE: Price and Offer
UAE offers can be port-based or delivered by road. See the UAE. Name the grade and tonnage for Equal Angle 80 × 80 × 6 mm in your request.
Equal Angle 80 × 80 × 6 mm Quotation for Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Buy Equal Angle 80 × 80 × 6 mm in Sharjah
Sharjah uses the same specification, with the trucking scope stated. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Equal Angle 80 × 80 × 6 mm Price via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Equal Angle 80 × 80 × 6 mm request.
Equal Angle 80 × 80 × 6 mm S275JR Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for Equal Angle 80 × 80 × 6 mm in your request.
Buy Equal Angle 80 × 80 × 6 mm in Doha
Doha offers depend on the documents the buyer lists. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Equal Angle 80 × 80 × 6 mm Price via Hamad Port
A Hamad Port price separates port charges from the steel price. Name the terminal and discharge terms in your Equal Angle 80 × 80 × 6 mm request.
Equal Angle 80 × 80 × 6 mm S355JR Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Equal Angle 80 × 80 × 6 mm Price in Muscat
For Muscat the delivery basis comes first in the quotation. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Request Equal Angle 80 × 80 × 6 mm via Sohar
Sohar cargo is quoted with port handover. Ask for a port-based Equal Angle 80 × 80 × 6 mm basis next to a delivered one.
Equal Angle 80 × 80 × 6 mm ST52 Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Request Equal Angle 80 × 80 × 6 mm Offer for Kuwait City
Kuwait City offers state the yard handling limits for long bars. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Buy Equal Angle 80 × 80 × 6 mm via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Ask for a port-based Equal Angle 80 × 80 × 6 mm basis next to a delivered one.
Equal Angle 80 × 80 × 6 mm for Georgia: Price and Offer
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for Equal Angle 80 × 80 × 6 mm.
Equal Angle 80 × 80 × 6 mm Quotation for Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Send the receiving address with your Equal Angle 80 × 80 × 6 mm tonnage.
Buy Equal Angle 80 × 80 × 6 mm in Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Name the unloading equipment when you ask for the Equal Angle 80 × 80 × 6 mm price.
Request Equal Angle 80 × 80 × 6 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of long bars. Name the terminal and discharge terms in your Equal Angle 80 × 80 × 6 mm request.
Buy Equal Angle 80 × 80 × 6 mm via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Ask for a port-based Equal Angle 80 × 80 × 6 mm basis next to a delivered one.
Buying Equal angles 80 × 80 × 6 mm and requesting a price
The price for Equal angles 80 × 80 × 6 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Equal angles 80 × 80 × 6 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Equal angles 80 × 80 × 6 mm
Include Equal angles 80 × 80 × 6 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Equal angles 80 × 80 × 6 mm
Equal angles 80 × 80 × 6 mm S235JR
For Equal angles 80 × 80 × 6 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm S275JR
For Equal angles 80 × 80 × 6 mm S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm S355JR
For Equal angles 80 × 80 × 6 mm S355JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm S355J2
For Equal angles 80 × 80 × 6 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm ST37
For Equal angles 80 × 80 × 6 mm ST37, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm ST52
For Equal angles 80 × 80 × 6 mm ST52, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Equal angles 80 × 80 × 6 mm 5SP
For Equal angles 80 × 80 × 6 mm 5SP, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
