Review HEA steel beams for the HEA 360 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
HEA steel beams 360: Quick reference
HEA steel beams 360
Parameter
Value
Size / form
HEA 360
Height
350 mm
Width
300 mm
Web thickness
10 mm
Flange thickness
17.5 mm
Mass
112.000 kg/m
6 m calculated mass
672.00 kg
12 m calculated mass
1344.00 kg
Dimensional / material references
EN 10365 / EN 10034 / EN 10279; GOST 8240 (UE); EN 10025-2
Grade / material
S235JR / S275JR / S355J2
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
HEA 360 has an actual section height of 350 mm, flange width 300 mm, web thickness 10 mm and flange thickness 17.5 mm. Reference mass is approximately 112 kg/m; calculated weights are 672 kg for a 6 m length and 1344 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 360
Review HEA steel beams for the HEA 360 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Use the exact series and section table: EN 10365 dimensions, EN 10034 I/H tolerances or EN 10279 channel tolerances; a UE/GOST 8240 section is not automatically UPN. Material references below are EN 10025-2, with the actual web/flange thickness band where known. The hub compares 3 < t ≤ 63 mm bands. Tensile/yield values do not establish member capacity. Elongation, orientation, impact specimen and acceptance conditions require the complete order specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S275JR
16 < t ≤ 40 mm
≥265
410–560
—
27 J / +20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S275JR
16 < t ≤ 40 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: HEA steel beams 360
HEA 360 has an actual section height of 350 mm, flange width 300 mm, web thickness 10 mm and flange thickness 17.5 mm. Reference mass is approximately 112 kg/m; calculated weights are 672 kg for a 6 m length and 1344 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 360
HEA 360 Beam Price by Grade: S235JR, S275JR, S355J2
The values below come from this page's reference tables and are not guaranteed; state the full standard designation and edition when you ask for a price.
HEA 360 Beam S235JR Price per Ton
S235JR limits C 0.17 max and Mn 1.40 max up to 40 mm thickness with a 225 MPa minimum yield, with P and S at 0.035 max and 27 J impact at +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request HEA 360 Beam S275JR Quotation
S275JR (C 0.21 max, Mn 1.50 max, 265 MPa minimum yield up to 40 mm) is the step up from S235JR when the design asks for more strength. Include bundle and loading limits. Quotations are available for UAE.
Buy HEA 360 Beam S355J2
S355J2 holds a 345 MPa minimum yield up to 40 mm with tighter P and S at 0.025 max (C 0.20 max, Mn 1.60 max, Si 0.55 max) and 27 J at −20°C. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
HEA 360 Beam St37, St44, St52 Price per Ton
Old drawings still ask for St37-2 / 1.0037 (C 0.17 max, P and S 0.050 max), St44-2 / 1.0044 (C 0.21 max) or St52-3 / 1.0570 (C 0.20 max, Mn 1.60 max, Si 0.55 max). Send tonnage and bar length for a price. Enquiries from Georgia are quoted on a stated delivery basis.
Choosing this specification
For HEA 360, verify section depth, flange width and connection clearances using the specified series table. Compare the required section properties and grade with the design; a neighbouring designation is not an automatic substitute.
Grades, standards and inspection requirements for this product: HEA steel beams
HEA 360 Beam S355J2 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies HEA 360 Beam to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR and S355J2.
HEA 360 Beam S235JR Price in Georgia
The HEA 360 Beam price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
HEA 360 Beam S275JR Price in Tbilisi
For HEA 360 Beam delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
HEA 360 Beam S355J2 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies HEA 360 Beam to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR and S355J2.
HEA 360 Beam S235JR Price in UAE
The HEA 360 Beam price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
HEA 360 Beam S275JR Price in Dubai
For HEA 360 Beam delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy HEA 360 Beam: Price and Quotation by Destination
HEA 360 beam weighs 112.000 kg/m; a 12 m bar is 1344.00 kg on that basis. Send grade, tonnage and bar length, and name the city or port you want the price for.
HEA 360 Beam S235JR Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Name the grade and tonnage for HEA 360 Beam in your request.
HEA 360 Beam Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the HEA 360 Beam price.
Request HEA 360 Beam Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your HEA 360 Beam tonnage.
HEA 360 Beam S275JR Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Name the grade and tonnage for HEA 360 Beam in your request.
Request HEA 360 Beam Offer for Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Send the receiving address with your HEA 360 Beam tonnage.
HEA 360 Beam Price via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Ask for a port-based HEA 360 Beam basis next to a delivered one.
HEA 360 Beam for UAE: Price and Offer
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for HEA 360 Beam.
HEA 360 Beam Quotation for Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Send the receiving address with your HEA 360 Beam tonnage.
Buy HEA 360 Beam in Sharjah
Sharjah uses the same specification, with the trucking scope stated. Name the unloading equipment when you ask for the HEA 360 Beam price.
Buy HEA 360 Beam via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Name the terminal and discharge terms in your HEA 360 Beam request.
HEA 360 Beam S275JR Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Send tonnage, grade and the delivery point for HEA 360 Beam.
Buy HEA 360 Beam in Doha
Doha offers depend on the documents the buyer lists. Name the unloading equipment when you ask for the HEA 360 Beam price.
Buy HEA 360 Beam via Hamad Port
A Hamad Port price separates port charges from the steel price. Name the terminal and discharge terms in your HEA 360 Beam request.
HEA 360 Beam S355J2 Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Send tonnage, grade and the delivery point for HEA 360 Beam.
HEA 360 Beam Price in Muscat
For Muscat the delivery basis comes first in the quotation. Name the unloading equipment when you ask for the HEA 360 Beam price.
HEA 360 Beam Price via Sohar
Sohar cargo is quoted with port handover. Ask for a port-based HEA 360 Beam basis next to a delivered one.
HEA 360 Beam S355J2 Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Name the grade and tonnage for HEA 360 Beam in your request.
Request HEA 360 Beam Offer for Kuwait City
Kuwait City offers state the yard handling limits for long bars. Send the receiving address with your HEA 360 Beam tonnage.
Request HEA 360 Beam via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Ask for a port-based HEA 360 Beam basis next to a delivered one.
HEA 360 Beam for Georgia: Price and Offer
Black Sea ports and inland cities can both be quoted. See Georgia. Name the grade and tonnage for HEA 360 Beam in your request.
HEA 360 Beam Quotation for Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Send the receiving address with your HEA 360 Beam tonnage.
Buy HEA 360 Beam in Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Name the unloading equipment when you ask for the HEA 360 Beam price.
HEA 360 Beam Price via Batumi
A Batumi-based offer names the port basis and who handles discharge of long bars. Name the terminal and discharge terms in your HEA 360 Beam request.
Request HEA 360 Beam via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Ask for a port-based HEA 360 Beam basis next to a delivered one.
HEA 360 Beam S235JR Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Name the grade and tonnage for HEA 360 Beam in your request.
Buy HEA 360 Beam in Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Name the unloading equipment when you ask for the HEA 360 Beam price.
HEA 360 Beam S355J2 Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Send tonnage, grade and the delivery point for HEA 360 Beam.
HEA 360 Beam Price in Baku
A Baku quotation can use a handover near the city or delivery to your site. Name the unloading equipment when you ask for the HEA 360 Beam price.
Buying HEA steel beams 360 and requesting a price
The price for HEA steel beams 360 depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for HEA steel beams 360, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for HEA steel beams 360
Include HEA steel beams 360, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for HEA steel beams 360
HEA steel beams 360 S235JR
For HEA steel beams 360 S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEA steel beams 360 S275JR
For HEA steel beams 360 S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEA steel beams 360 S355J2
For HEA steel beams 360 S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
