Review HEB steel beams for the HEB 220 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
HEB steel beams 220: Quick reference
HEB steel beams 220
Parameter
Value
Size / form
HEB 220
Height
220 mm
Width
220 mm
Web thickness
9.5 mm
Flange thickness
16 mm
Mass
71.500 kg/m
6 m calculated mass
429.00 kg
12 m calculated mass
858.00 kg
Dimensional / material references
EN 10365 / EN 10034 / EN 10279; GOST 8240 (UE); EN 10025-2
Grade / material
S235JR / S275JR / S355J2
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
HEB 220 has an actual section height of 220 mm, flange width 220 mm, web thickness 9.5 mm and flange thickness 16 mm. Reference mass is approximately 71.5 kg/m; calculated weights are 429 kg for a 6 m length and 858 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 220
Review HEB steel beams for the HEB 220 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Use the exact series and section table: EN 10365 dimensions, EN 10034 I/H tolerances or EN 10279 channel tolerances; a UE/GOST 8240 section is not automatically UPN. Material references below are EN 10025-2, with the actual web/flange thickness band where known. The hub compares 3 < t ≤ 63 mm bands. Tensile/yield values do not establish member capacity. Elongation, orientation, impact specimen and acceptance conditions require the complete order specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S275JR
3 < t ≤ 16 mm
≥275
410–560
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S275JR
3 < t ≤ 16 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: HEB steel beams 220
HEB 220 has an actual section height of 220 mm, flange width 220 mm, web thickness 9.5 mm and flange thickness 16 mm. Reference mass is approximately 71.5 kg/m; calculated weights are 429 kg for a 6 m length and 858 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEB 220
HEB 220 Beam Price by Grade: S235JR, S275JR, S355J2
Limits are published reference values from this page's tables, not guaranteed values; confirm the full standard designation in your enquiry.
Buy HEB 220 Beam S235JR
S235JR carries C 0.17 max and Mn 1.40 max with a 235 MPa minimum yield for thicknesses up to 16 mm, the usual starting point for general steel framing. Include bundle and loading limits. It can be quoted for Georgia buyers.
HEB 220 Beam S275JR Price per Ton
S275JR raises the limits to C 0.21 max and Mn 1.50 max with a 275 MPa minimum yield up to 16 mm thickness, for more heavily loaded frames. Name the standard and edition in the enquiry. Enquiries from Azerbaijan are quoted on a stated delivery basis.
Request HEB 220 Beam S355J2 Quotation
Choose S355J2 when low-temperature toughness matters: 355 MPa minimum yield, 27 J at −20°C, C 0.20 max, Mn 1.60 max, Si 0.55 max, P and S 0.025 max, for thicknesses up to 16 mm. Send tonnage and bar length for a price. Quotations are available for Turkmenistan.
Buy HEB 220 Beam St37, St44, St52
Quote St37, St44 or St52 HEB beams against their historical DIN 17100 references and name the modern grade you will accept: St37-2 / 1.0037 (C 0.17 max, P and S 0.050 max), St44-2 / 1.0044 (C 0.21 max), St52-3 / 1.0570 (C 0.20 max, Mn 1.60 max, Si 0.55 max). State tonnage and the receiving city or port. It can be quoted for Qatar buyers.
Choosing this specification
For HEB 220, verify section depth, flange width and connection clearances using the specified series table. Compare the required section properties and grade with the design; a neighbouring designation is not an automatic substitute.
Grades, standards and inspection requirements for this product: HEB steel beams
HEB 220 Beam S275JR Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies HEB 220 Beam to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR and S355J2.
HEB 220 Beam S355J2 Price in Georgia
The HEB 220 Beam price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
HEB 220 Beam S235JR Price in Tbilisi
For HEB 220 Beam delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
HEB 220 Beam S275JR Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies HEB 220 Beam to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR and S355J2.
HEB 220 Beam S355J2 Price in UAE
The HEB 220 Beam price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
HEB 220 Beam S235JR Price in Dubai
For HEB 220 Beam delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy HEB 220 Beam: Price and Quotation by Destination
HEB 220 beam weighs 71.500 kg/m; a 12 m bar is 858.00 kg on that basis. Send grade, tonnage and bar length, and name the city or port you want the price for.
HEB 220 Beam S355J2 Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Name the grade and tonnage for HEB 220 Beam in your request.
Request HEB 220 Beam Offer for Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam S275JR Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Name the grade and tonnage for HEB 220 Beam in your request.
HEB 220 Beam Quotation for Baku
A Baku quotation can use a handover near the city or delivery to your site. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam S355J2 Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and bar length together with the rail or road leg. See the Uzbekistan destination guide. Name the grade and tonnage for HEB 220 Beam in your request.
Buy HEB 220 Beam in Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for 12 m bars. Name the unloading equipment when you ask for the HEB 220 Beam price.
HEB 220 Beam Price in Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Name the unloading equipment when you ask for the HEB 220 Beam price.
HEB 220 Beam S235JR Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Send tonnage, grade and the delivery point for HEB 220 Beam.
HEB 220 Beam Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the HEB 220 Beam price.
Request HEB 220 Beam via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based HEB 220 Beam basis next to a delivered one.
Request HEB 220 Beam Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Send tonnage, grade and the delivery point for HEB 220 Beam.
Request HEB 220 Beam Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam Price via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your HEB 220 Beam request.
HEB 220 Beam S235JR Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for HEB 220 Beam.
HEB 220 Beam Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam Price via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your HEB 220 Beam request.
HEB 220 Beam S275JR Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Name the grade and tonnage for HEB 220 Beam in your request.
Buy HEB 220 Beam in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the HEB 220 Beam price.
Request HEB 220 Beam via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your HEB 220 Beam request.
HEB 220 Beam S275JR Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Name the grade and tonnage for HEB 220 Beam in your request.
HEB 220 Beam Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the HEB 220 Beam price.
Buy HEB 220 Beam via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based HEB 220 Beam basis next to a delivered one.
Request HEB 220 Beam Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for HEB 220 Beam in your request.
Request HEB 220 Beam Offer for Tbilisi
Tbilisi enquiries go to our head office, so bar lengths, bundling and loading can be agreed directly. Send the receiving address with your HEB 220 Beam tonnage.
HEB 220 Beam Quotation for Kutaisi
Kutaisi offers separate the bar price from the road freight. Send the receiving address with your HEB 220 Beam tonnage.
Request HEB 220 Beam via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your HEB 220 Beam request.
Buy HEB 220 Beam via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your HEB 220 Beam request.
Buying HEB steel beams 220 and requesting a price
The price for HEB steel beams 220 depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for HEB steel beams 220, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for HEB steel beams 220
Include HEB steel beams 220, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for HEB steel beams 220
HEB steel beams 220 S235JR
For HEB steel beams 220 S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEB steel beams 220 S275JR
For HEB steel beams 220 S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEB steel beams 220 S355J2
For HEB steel beams 220 S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
