Review Heavy steel plate for the 30 × 2000 × 6000 mm (30x2000x6000) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Reference dimensions: 30 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2826 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 2000 × 6000 mm
Heavy steel plate 30 × 2000 × 6000 mm Technical and buying guide
EMRA Steel
Review Heavy steel plate for the 30 × 2000 × 6000 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
EN 10029 controls plate dimensional and shape tolerances; EN 10025-2 controls the selected structural grade. Numeric rows use the thickness of this plate; the hub compares thickness bands. S235JR and S275JR differ from S355J2, including the impact test temperature. Agree delivery condition, test orientation, impact applicability, flatness, edge condition and any ultrasonic test. Do not apply section elongation values to wide plate.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S275JR
16 < t ≤ 40 mm
≥265
410–560
—
27 J / +20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S275JR
16 < t ≤ 40 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Heavy steel plate 30 × 2000 × 6000 mm
Reference dimensions: 30 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 2826 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 30 × 2000 × 6000 mm
Heavy Steel Plate 30 × 2000 × 6000 mm Price by Grade: S235JR, S275JR, S355J2, St37, St44, St52
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
Request Heavy Steel Plate 30 × 2000 × 6000 mm S235JR Quotation
S235JR (16 < t ≤ 40 mm): C 0.17 max, Mn 1.40 max, P 0.035 max, S 0.035 max; Re 225 MPa min, Rm 360–510 MPa, impact 27 J / +20°C. Send tonnage and size for a price. Quotations are available for Qatar.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm S275JR
Reference values for S275JR (16 < t ≤ 40 mm): C 0.21 max, Mn 1.50 max, P 0.035 max, S 0.035 max; Re 265 MPa min, Rm 410–560 MPa, impact 27 J / +20°C. State tonnage and the receiving city or port. It can be quoted for Kuwait buyers.
Heavy Steel Plate 30 × 2000 × 6000 mm S355J2 Price per Ton
Reference values for S355J2 (16 < t ≤ 40 mm): C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.025 max, S 0.025 max; Re 345 MPa min, Rm 470–630 MPa, impact 27 J / −20°C. Include packing and loading limits. Enquiries from Armenia are quoted on a stated delivery basis.
Request Heavy Steel Plate 30 × 2000 × 6000 mm St37, St44, St52 Quotation
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Name the standard and edition in the enquiry. Quotations are available for Uzbekistan.
Choosing this specification
For 30 × 2000 × 6000 mm, agree the dimension order and whether the material is supplied as coil or cut lengths. Check usable width, cutting layout and flatness before comparing yield; nominal geometry does not include trimming or process losses. At nominal geometry and 7850 kg/m³ steel density, the reference is 2826.000 kg per piece. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 30 × 1250 × 12000 mm, the nominal geometric reference is 20.0% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Heavy steel plate
Heavy Steel Plate 30 × 2000 × 6000 mm S235JR Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Heavy Steel Plate 30 × 2000 × 6000 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR, S355J2, St37, St44 and St52.
Heavy Steel Plate 30 × 2000 × 6000 mm S275JR Price in Georgia
The Heavy Steel Plate 30 × 2000 × 6000 mm price in Georgia depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate 30 × 2000 × 6000 mm S355J2 Price in Tbilisi
For Heavy Steel Plate 30 × 2000 × 6000 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Heavy Steel Plate 30 × 2000 × 6000 mm St37 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Heavy Steel Plate 30 × 2000 × 6000 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR, S355J2, St37, St44 and St52.
Heavy Steel Plate 30 × 2000 × 6000 mm St44 Price in UAE
The Heavy Steel Plate 30 × 2000 × 6000 mm price in the UAE depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate 30 × 2000 × 6000 mm St52 Price in Dubai
For Heavy Steel Plate 30 × 2000 × 6000 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm: Price and Quotation by Destination
Heavy Steel Plate 30 × 2000 × 6000 mm weighs 2826.000 kg per piece on the page reference. Send grade, tonnage and piece count, and name the city or port you want the price for.
Heavy Steel Plate 30 × 2000 × 6000 mm S355J2 Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Name the grade and tonnage for Heavy Steel Plate 30 × 2000 × 6000 mm in your request.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm in Doha
Doha offers depend on the documents the buyer lists. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Heavy Steel Plate 30 × 2000 × 6000 mm Price via Hamad Port
A Hamad Port price separates port charges from the steel price. Name the terminal and discharge terms in your Heavy Steel Plate 30 × 2000 × 6000 mm request.
Heavy Steel Plate 30 × 2000 × 6000 mm St37 Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate 30 × 2000 × 6000 mm.
Heavy Steel Plate 30 × 2000 × 6000 mm Price in Muscat
For Muscat the delivery basis comes first in the quotation. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Request Heavy Steel Plate 30 × 2000 × 6000 mm via Sohar
Sohar cargo is quoted with port handover. Ask for a port-based Heavy Steel Plate 30 × 2000 × 6000 mm basis next to a delivered one.
Heavy Steel Plate 30 × 2000 × 6000 mm S235JR Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Send tonnage, grade and the delivery point for Heavy Steel Plate 30 × 2000 × 6000 mm.
Request Heavy Steel Plate 30 × 2000 × 6000 mm Offer for Kuwait City
Kuwait City offers state the yard handling limits for heavy coils and sheets. Send the receiving address with your Heavy Steel Plate 30 × 2000 × 6000 mm tonnage.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Ask for a port-based Heavy Steel Plate 30 × 2000 × 6000 mm basis next to a delivered one.
Heavy Steel Plate 30 × 2000 × 6000 mm for Georgia: Price and Offer
Black Sea ports and inland cities can both be quoted. See Georgia. Send tonnage, grade and the delivery point for Heavy Steel Plate 30 × 2000 × 6000 mm.
Heavy Steel Plate 30 × 2000 × 6000 mm Quotation for Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Send the receiving address with your Heavy Steel Plate 30 × 2000 × 6000 mm tonnage.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm in Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Request Heavy Steel Plate 30 × 2000 × 6000 mm via Batumi
A Batumi-based offer names the port basis and who handles discharge of heavy coils and sheets. Name the terminal and discharge terms in your Heavy Steel Plate 30 × 2000 × 6000 mm request.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Ask for a port-based Heavy Steel Plate 30 × 2000 × 6000 mm basis next to a delivered one.
Heavy Steel Plate 30 × 2000 × 6000 mm St44 Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Name the grade and tonnage for Heavy Steel Plate 30 × 2000 × 6000 mm in your request.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm in Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Heavy Steel Plate 30 × 2000 × 6000 mm S235JR Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Name the grade and tonnage for Heavy Steel Plate 30 × 2000 × 6000 mm in your request.
Heavy Steel Plate 30 × 2000 × 6000 mm Price in Baku
A Baku quotation can use a handover near the city or delivery to your site. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Heavy Steel Plate 30 × 2000 × 6000 mm S275JR Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and size together with the rail or road leg. See the Uzbekistan destination guide. Name the grade and tonnage for Heavy Steel Plate 30 × 2000 × 6000 mm in your request.
Request Heavy Steel Plate 30 × 2000 × 6000 mm Offer for Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for heavy coils and sheets. Send the receiving address with your Heavy Steel Plate 30 × 2000 × 6000 mm tonnage.
Heavy Steel Plate 30 × 2000 × 6000 mm Quotation for Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Send the receiving address with your Heavy Steel Plate 30 × 2000 × 6000 mm tonnage.
Heavy Steel Plate 30 × 2000 × 6000 mm St52 Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Send tonnage, grade and the delivery point for Heavy Steel Plate 30 × 2000 × 6000 mm.
Heavy Steel Plate 30 × 2000 × 6000 mm Quotation for Ashgabat
An Ashgabat offer names the handover and the documents required. Send the receiving address with your Heavy Steel Plate 30 × 2000 × 6000 mm tonnage.
Request Heavy Steel Plate 30 × 2000 × 6000 mm via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Name the terminal and discharge terms in your Heavy Steel Plate 30 × 2000 × 6000 mm request.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate 30 × 2000 × 6000 mm.
Buy Heavy Steel Plate 30 × 2000 × 6000 mm in Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Heavy Steel Plate 30 × 2000 × 6000 mm Price in Sharjah
A Sharjah offer lists the road leg and who handles unloading. Name the unloading equipment when you ask for the Heavy Steel Plate 30 × 2000 × 6000 mm price.
Heavy Steel Plate 30 × 2000 × 6000 mm Price via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Ask for a port-based Heavy Steel Plate 30 × 2000 × 6000 mm basis next to a delivered one.
Buying Heavy steel plate 30 × 2000 × 6000 mm and requesting a price
The price for Heavy steel plate 30 × 2000 × 6000 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Heavy steel plate 30 × 2000 × 6000 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Heavy steel plate 30 × 2000 × 6000 mm
Include Heavy steel plate 30 × 2000 × 6000 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Heavy steel plate 30 × 2000 × 6000 mm
Heavy steel plate 30 × 2000 × 6000 mm S235JR
For Heavy steel plate 30 × 2000 × 6000 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate 30 × 2000 × 6000 mm S275JR
For Heavy steel plate 30 × 2000 × 6000 mm S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate 30 × 2000 × 6000 mm S355J2
For Heavy steel plate 30 × 2000 × 6000 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
