Review Heavy steel plate for the 50 × 2000 × 6000 mm (50x2000x6000) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Reference dimensions: 50 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 2000 × 6000 mm
Heavy steel plate 50 × 2000 × 6000 mm Technical and buying guide
EMRA Steel
Review Heavy steel plate for the 50 × 2000 × 6000 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
EN 10029 controls plate dimensional and shape tolerances; EN 10025-2 controls the selected structural grade. Numeric rows use the thickness of this plate; the hub compares thickness bands. S235JR and S275JR differ from S355J2, including the impact test temperature. Agree delivery condition, test orientation, impact applicability, flatness, edge condition and any ultrasonic test. Do not apply section elongation values to wide plate.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
40 < t ≤ 63 mm
≥215
360–510
—
27 J / +20°C
S275JR
40 < t ≤ 63 mm
≥255
410–560
—
27 J / +20°C
S355J2
40 < t ≤ 63 mm
≥335
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
40 < t ≤ 63 mm
≤0.20
≤1.40
—
≤0.035
≤0.035
—
S275JR
40 < t ≤ 63 mm
≤0.22
≤1.50
—
≤0.035
≤0.035
—
S355J2
40 < t ≤ 63 mm
≤0.22
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Heavy steel plate 50 × 2000 × 6000 mm
Reference dimensions: 50 × 2000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 4710 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 50 × 2000 × 6000 mm
Heavy Steel Plate 50 × 2000 × 6000 mm Price by Grade: S235JR, S275JR, S355J2, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
Heavy Steel Plate 50 × 2000 × 6000 mm S235JR Price per Ton
S235JR (40 < t ≤ 63 mm): C 0.20 max, Mn 1.40 max, P 0.035 max, S 0.035 max; Re 215 MPa min, Rm 360–510 MPa, impact 27 J / +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request Heavy Steel Plate 50 × 2000 × 6000 mm S275JR Quotation
Reference values for S275JR (40 < t ≤ 63 mm): C 0.22 max, Mn 1.50 max, P 0.035 max, S 0.035 max; Re 255 MPa min, Rm 410–560 MPa, impact 27 J / +20°C. Include packing and loading limits. Quotations are available for UAE.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm S355J2
Reference values for S355J2 (40 < t ≤ 63 mm): C 0.22 max, Mn 1.60 max, Si 0.55 max, P 0.025 max, S 0.025 max; Re 335 MPa min, Rm 470–630 MPa, impact 27 J / −20°C. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
Heavy Steel Plate 50 × 2000 × 6000 mm St37, St44, St52 Price per Ton
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Send tonnage and size for a price. Enquiries from Georgia are quoted on a stated delivery basis.
Choosing this specification
For 50 × 2000 × 6000 mm, agree the dimension order and whether the material is supplied as coil or cut lengths. Check usable width, cutting layout and flatness before comparing yield; nominal geometry does not include trimming or process losses. At nominal geometry and 7850 kg/m³ steel density, the reference is 4710.000 kg per piece. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 50 × 1250 × 12000 mm, the nominal geometric reference is 20.0% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Heavy steel plate
Heavy Steel Plate 50 × 2000 × 6000 mm St52 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Heavy Steel Plate 50 × 2000 × 6000 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR, S355J2, St37, St44 and St52.
Heavy Steel Plate 50 × 2000 × 6000 mm S235JR Price in Georgia
The Heavy Steel Plate 50 × 2000 × 6000 mm price in Georgia depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate 50 × 2000 × 6000 mm S275JR Price in Tbilisi
For Heavy Steel Plate 50 × 2000 × 6000 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Heavy Steel Plate 50 × 2000 × 6000 mm S355J2 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Heavy Steel Plate 50 × 2000 × 6000 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with plate size, piece weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR, S355J2, St37, St44 and St52.
Heavy Steel Plate 50 × 2000 × 6000 mm St37 Price in UAE
The Heavy Steel Plate 50 × 2000 × 6000 mm price in the UAE depends on grade, quantity and the delivery basis, as well as plate size, piece weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Heavy Steel Plate 50 × 2000 × 6000 mm St44 Price in Dubai
For Heavy Steel Plate 50 × 2000 × 6000 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm: Price and Quotation by Destination
Heavy Steel Plate 50 × 2000 × 6000 mm weighs 4710.000 kg per piece on the page reference. Send grade, tonnage and piece count, and name the city or port you want the price for.
Heavy Steel Plate 50 × 2000 × 6000 mm St44 Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Name the grade and tonnage for Heavy Steel Plate 50 × 2000 × 6000 mm in your request.
Heavy Steel Plate 50 × 2000 × 6000 mm Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Heavy Steel Plate 50 × 2000 × 6000 mm price.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Heavy Steel Plate 50 × 2000 × 6000 mm basis next to a delivered one.
Request Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Name the grade and tonnage for Heavy Steel Plate 50 × 2000 × 6000 mm in your request.
Request Heavy Steel Plate 50 × 2000 × 6000 mm Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Request Heavy Steel Plate 50 × 2000 × 6000 mm via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Heavy Steel Plate 50 × 2000 × 6000 mm request.
Heavy Steel Plate 50 × 2000 × 6000 mm S275JR Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate 50 × 2000 × 6000 mm.
Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Request Heavy Steel Plate 50 × 2000 × 6000 mm via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Heavy Steel Plate 50 × 2000 × 6000 mm request.
Heavy Steel Plate 50 × 2000 × 6000 mm S355J2 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Send tonnage, grade and the delivery point for Heavy Steel Plate 50 × 2000 × 6000 mm.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Heavy Steel Plate 50 × 2000 × 6000 mm price.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Heavy Steel Plate 50 × 2000 × 6000 mm request.
Heavy Steel Plate 50 × 2000 × 6000 mm St52 Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Send tonnage, grade and the delivery point for Heavy Steel Plate 50 × 2000 × 6000 mm.
Heavy Steel Plate 50 × 2000 × 6000 mm Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Heavy Steel Plate 50 × 2000 × 6000 mm price.
Heavy Steel Plate 50 × 2000 × 6000 mm Price via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Heavy Steel Plate 50 × 2000 × 6000 mm basis next to a delivered one.
Request Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Heavy Steel Plate 50 × 2000 × 6000 mm in your request.
Request Heavy Steel Plate 50 × 2000 × 6000 mm Offer for Tbilisi
Tbilisi enquiries go to our head office, so sizes, packing and loading can be agreed directly. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Heavy Steel Plate 50 × 2000 × 6000 mm request.
Heavy Steel Plate 50 × 2000 × 6000 mm Price via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Heavy Steel Plate 50 × 2000 × 6000 mm request.
Heavy Steel Plate 50 × 2000 × 6000 mm St37 Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Name the grade and tonnage for Heavy Steel Plate 50 × 2000 × 6000 mm in your request.
Heavy Steel Plate 50 × 2000 × 6000 mm Quotation for Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Heavy Steel Plate 50 × 2000 × 6000 mm St52 Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Name the grade and tonnage for Heavy Steel Plate 50 × 2000 × 6000 mm in your request.
Buy Heavy Steel Plate 50 × 2000 × 6000 mm in Baku
Baku offers fix the handover point and customs scope before the price. Name the unloading equipment when you ask for the Heavy Steel Plate 50 × 2000 × 6000 mm price.
Heavy Steel Plate 50 × 2000 × 6000 mm S235JR Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Heavy Steel Plate 50 × 2000 × 6000 mm.
Heavy Steel Plate 50 × 2000 × 6000 mm Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the Heavy Steel Plate 50 × 2000 × 6000 mm price.
Request Heavy Steel Plate 50 × 2000 × 6000 mm Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your Heavy Steel Plate 50 × 2000 × 6000 mm tonnage.
Buying Heavy steel plate 50 × 2000 × 6000 mm and requesting a price
The price for Heavy steel plate 50 × 2000 × 6000 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Heavy steel plate 50 × 2000 × 6000 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Heavy steel plate 50 × 2000 × 6000 mm
Include Heavy steel plate 50 × 2000 × 6000 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Heavy steel plate 50 × 2000 × 6000 mm
Heavy steel plate 50 × 2000 × 6000 mm S235JR
For Heavy steel plate 50 × 2000 × 6000 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate 50 × 2000 × 6000 mm S275JR
For Heavy steel plate 50 × 2000 × 6000 mm S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Heavy steel plate 50 × 2000 × 6000 mm S355J2
For Heavy steel plate 50 × 2000 × 6000 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
