Review Hot-rolled sheet and coil for the 6 × 1250 mm (6x1250) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Hot-rolled sheet and coil 6 × 1250 mm: Quick reference
Hot-rolled sheet and coil 6 × 1250 mm
Parameter
Value
Size / form
6 × 1250 mm
Wall / product thickness
6 mm
Mass
47.100 kg/m²
Dimensional / material references
EN 10051; EN 10025-2 / EN 10111
Grade / material
S235JR / S355J2 / DD11 / DD12
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Reference thickness × width: 6 × 1250 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1250 mm
Hot-rolled sheet and coil 6 × 1250 mm Technical and buying guide
EMRA Steel
Review Hot-rolled sheet and coil for the 6 × 1250 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Distinguish structural grades to EN 10025-2 from DD11/DD12 forming grades to EN 10111; EN 10051 addresses the applicable hot-strip dimensional tolerances. DD11/DD12 mechanical references are restricted to 3–11 mm and transverse specimens, with A5 for thickness above 3 mm; a 12 mm request has no numeric DD mechanical values here. Specify coil or sheet, surface, edges, coil bore/mass and cut length separately.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
DD11
3 < t ≤ 11 mm
170–340
≤440
≥28 (A5)
—
DD12
3 < t ≤ 11 mm
170–320
≤420
≥30 (A5)
—
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
DD11
EN 10111
≤0.12
≤0.60
—
≤0.045
≤0.045
—
DD12
EN 10111
≤0.10
≤0.45
—
≤0.035
≤0.035
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Hot-rolled sheet and coil 6 × 1250 mm
Reference thickness × width: 6 × 1250 mm. Calculated mass is approximately 47.1 kg/m² at 7850 kg/m³. Coil mass cannot be inferred from thickness and width alone; specify length or coil mass, coil diameters, grade, surface and packaging. 6 × 1250 mm
Hot-Rolled Sheet 6 × 1250 mm Price by Grade: S235JR, S355J2, DD11, DD12, St37, St44, St52
Values are published reference values from this page's tables, not guaranteed values; confirm the standard and grade in your enquiry.
Buy Hot-Rolled Sheet 6 × 1250 mm S235JR
S235JR (3 < t ≤ 16 mm): C 0.17 max, Mn 1.40 max, P 0.035 max, S 0.035 max; Re 235 MPa min, Rm 360–510 MPa, impact 27 J / +20°C. Include packing and loading limits. It can be quoted for Georgia buyers.
Hot-Rolled Sheet 6 × 1250 mm S355J2 Price per Ton
Reference values for S355J2 (3 < t ≤ 16 mm): C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.025 max, S 0.025 max; Re 355 MPa min, Rm 470–630 MPa, impact 27 J / −20°C. Name the standard and edition in the enquiry. Enquiries from Azerbaijan are quoted on a stated delivery basis.
DD11 / DD12: DD11 (EN 10111): C 0.12 max, Mn 0.60 max, P 0.045 max, S 0.045 max; 3 < t ≤ 11 mm: Re 170–340 MPa, Rm 440 MPa max, A 28 % min (A5); DD12 (EN 10111): C 0.10 max, Mn 0.45 max, P 0.035 max, S 0.035 max; 3 < t ≤ 11 mm: Re 170–320 MPa, Rm 420 MPa max, A 30 % min (A5). Send tonnage and size for a price. Quotations are available for Turkmenistan.
Buy Hot-Rolled Sheet 6 × 1250 mm St37, St44, St52
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. State tonnage and the receiving city or port. It can be quoted for Qatar buyers.
Choosing this specification
For 6 × 1250 mm, agree the dimension order and whether the material is supplied as coil or cut lengths. Check usable width, cutting layout and flatness before comparing yield; nominal geometry does not include trimming or process losses. At nominal geometry and 7850 kg/m³ steel density, the reference is 47.100 kg per square metre. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating.
Hot-Rolled Sheet 6 × 1250 mm St52 Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Hot-Rolled Sheet 6 × 1250 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with sheet or coil form, width and coil weight. See the Georgia market guide. Available grades: S235JR, S355J2, DD11, DD12, St37, St44 and St52.
Hot-Rolled Sheet 6 × 1250 mm S235JR Price in Georgia
The Hot-Rolled Sheet 6 × 1250 mm price in Georgia depends on grade, quantity and the delivery basis, as well as sheet or coil form, width and coil weight. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Hot-Rolled Sheet 6 × 1250 mm S355J2 Price in Tbilisi
For Hot-Rolled Sheet 6 × 1250 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Hot-Rolled Sheet 6 × 1250 mm DD11 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Hot-Rolled Sheet 6 × 1250 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with sheet or coil form, width and coil weight. See the UAE market guide. Available grades: S235JR, S355J2, DD11, DD12, St37, St44 and St52.
Hot-Rolled Sheet 6 × 1250 mm DD12 Price in UAE
The Hot-Rolled Sheet 6 × 1250 mm price in the UAE depends on grade, quantity and the delivery basis, as well as sheet or coil form, width and coil weight. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Hot-Rolled Sheet 6 × 1250 mm St37 Price in Dubai
For Hot-Rolled Sheet 6 × 1250 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Hot-Rolled Sheet 6 × 1250 mm: Price and Quotation by Destination
Hot-Rolled Sheet 6 × 1250 mm weighs 47.100 kg/m² on the page reference. Send grade, tonnage, width and length, and name the city or port you want the price for.
Hot-Rolled Sheet 6 × 1250 mm DD12 Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Request Hot-Rolled Sheet 6 × 1250 mm Offer for Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm St52 Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Hot-Rolled Sheet 6 × 1250 mm Quotation for Baku
A Baku quotation can use a handover near the city or delivery to your site. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm S235JR Supplier and Price for Uzbekistan and Tashkent
Uzbekistan is landlocked, so offers fix grade and size together with the rail or road leg. See the Uzbekistan destination guide. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Buy Hot-Rolled Sheet 6 × 1250 mm in Tashkent
Tashkent quotations name the receiving station or site and the wagon or truck type, which matters for heavy coils and sheets. Name the unloading equipment when you ask for the Hot-Rolled Sheet 6 × 1250 mm price.
Hot-Rolled Sheet 6 × 1250 mm Price in Bukhara
Route and handover for Bukhara are confirmed before a delivered price. Name the unloading equipment when you ask for the Hot-Rolled Sheet 6 × 1250 mm price.
Hot-Rolled Sheet 6 × 1250 mm St37 Supplier and Price for Turkmenistan and Ashgabat
Turkmen enquiries can use a Caspian port or an inland receiving point. See Turkmenistan. Send tonnage, grade and the delivery point for Hot-Rolled Sheet 6 × 1250 mm.
Hot-Rolled Sheet 6 × 1250 mm Price in Ashgabat
An Ashgabat offer names the handover and the documents required. Name the unloading equipment when you ask for the Hot-Rolled Sheet 6 × 1250 mm price.
Request Hot-Rolled Sheet 6 × 1250 mm via Turkmenbashi
Turkmenbashi can be quoted as a Caspian port handover. Ask for a port-based Hot-Rolled Sheet 6 × 1250 mm basis next to a delivered one.
Request Hot-Rolled Sheet 6 × 1250 mm Quotation for UAE
Our Dubai office supports specification questions for the UAE. See the UAE destination guide. Send tonnage, grade and the delivery point for Hot-Rolled Sheet 6 × 1250 mm.
Request Hot-Rolled Sheet 6 × 1250 mm Offer for Dubai
Dubai enquiries are handled with our Dubai office for specification questions. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm Quotation for Sharjah
A Sharjah offer lists the road leg and who handles unloading. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm Price via Jebel Ali
Jebel Ali quotes show port handover and discharge terms. Name the terminal and discharge terms in your Hot-Rolled Sheet 6 × 1250 mm request.
Hot-Rolled Sheet 6 × 1250 mm S355J2 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Hot-Rolled Sheet 6 × 1250 mm.
Hot-Rolled Sheet 6 × 1250 mm Quotation for Doha
For Doha the delivery basis and required paperwork are stated with the price. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm Price via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Name the terminal and discharge terms in your Hot-Rolled Sheet 6 × 1250 mm request.
Hot-Rolled Sheet 6 × 1250 mm DD11 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Buy Hot-Rolled Sheet 6 × 1250 mm in Muscat
Muscat offers state the discharge port and terms before the price. Name the unloading equipment when you ask for the Hot-Rolled Sheet 6 × 1250 mm price.
Request Hot-Rolled Sheet 6 × 1250 mm via Sohar
A Sohar offer names the terminal basis and the discharge scope. Name the terminal and discharge terms in your Hot-Rolled Sheet 6 × 1250 mm request.
Hot-Rolled Sheet 6 × 1250 mm St44 Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Hot-Rolled Sheet 6 × 1250 mm Price in Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Name the unloading equipment when you ask for the Hot-Rolled Sheet 6 × 1250 mm price.
Buy Hot-Rolled Sheet 6 × 1250 mm via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Ask for a port-based Hot-Rolled Sheet 6 × 1250 mm basis next to a delivered one.
Request Hot-Rolled Sheet 6 × 1250 mm Quotation for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Hot-Rolled Sheet 6 × 1250 mm in your request.
Request Hot-Rolled Sheet 6 × 1250 mm Offer for Tbilisi
Tbilisi enquiries go to our head office, so sizes, packing and loading can be agreed directly. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Hot-Rolled Sheet 6 × 1250 mm Quotation for Kutaisi
Kutaisi offers separate the price from the road freight. Send the receiving address with your Hot-Rolled Sheet 6 × 1250 mm tonnage.
Request Hot-Rolled Sheet 6 × 1250 mm via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Name the terminal and discharge terms in your Hot-Rolled Sheet 6 × 1250 mm request.
Buy Hot-Rolled Sheet 6 × 1250 mm via Poti Port
A Poti-based price names the terminal and the discharge terms. Name the terminal and discharge terms in your Hot-Rolled Sheet 6 × 1250 mm request.
Buying Hot-rolled sheet and coil 6 × 1250 mm and requesting a price
The price for Hot-rolled sheet and coil 6 × 1250 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Hot-rolled sheet and coil 6 × 1250 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Hot-rolled sheet and coil 6 × 1250 mm
Include Hot-rolled sheet and coil 6 × 1250 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for Hot-rolled sheet and coil 6 × 1250 mm
Hot-rolled sheet and coil 6 × 1250 mm S235JR
For Hot-rolled sheet and coil 6 × 1250 mm S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil 6 × 1250 mm S355J2
For Hot-rolled sheet and coil 6 × 1250 mm S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil 6 × 1250 mm DD11
For Hot-rolled sheet and coil 6 × 1250 mm DD11, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
Hot-rolled sheet and coil 6 × 1250 mm DD12
For Hot-rolled sheet and coil 6 × 1250 mm DD12, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
