Review Steel slab for the 250 × 1500 × 6000 mm (250x1500x6000) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Steel slab 250 × 1500 × 6000 mm: Quick reference
Steel slab 250 × 1500 × 6000 mm
Parameter
Value
Size / form
250 × 1500 × 6000 mm
Wall / product thickness
250 mm
Mass
17662.500 kg
Dimensional / material references
Agreed in the order
Grade / material
Agreed in the order
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
Reference dimensions: 250 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 17662.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 250 × 1500 × 6000 mm
Steel slab 250 × 1500 × 6000 mm Technical and buying guide
EMRA Steel
Review Steel slab for the 250 × 1500 × 6000 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Specify the cast cross-section and cut length, full heat chemistry, deoxidation, surface acceptance, internal soundness and downstream rolling route. Finished EN 10025 mechanical values cannot certify an unrolled billet or slab. For 3SP/5SP requests, provide the complete GOST or other agreed specification and edition; no universal numerical chemistry is assigned from a short commercial name.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
C
%
Agreed in the order
Mn
%
Agreed in the order
Si
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Al
%
Agreed in the order
Nb
%
Agreed in the order
V
%
Agreed in the order
Ti
%
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
3SP and 5SP · GOST 380-2005 ladle analysis
3SP and 5SP refer here to fully killed Ст3сп and Ст5сп. These chemistry references support billet/slab enquiries; casting quality, residual elements, steelmaking-route exceptions and the downstream product standard remain separate order requirements. Finished rolled-steel mechanical properties do not certify an as-cast billet or slab.
3SP and 5SP · GOST 380-2005 ladle analysis
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
3SP / Ст3сп
0.14–0.22
0.40–0.65
0.15–0.30
≤0.040
≤0.050
5SP / Ст5сп
0.28–0.37
0.50–0.80
0.15–0.30
≤0.040
≤0.050
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Requested minimum manganese: 0.50% and 0.60%
Mn +0.50 and Mn +0.60 mean Mn ≥0.50% and Mn ≥0.60%. The table intersects each buyer minimum with the grade range. They are optional purchase limits, not new standard grade names. St52-3 has a maximum Mn limit in the reference below; a minimum of 0.50% or 0.60% requires separate mill agreement.
Requested minimum manganese: 0.50% and 0.60%
Grade / commercial type
Buyer requirement
Compatible Mn range (%)
3SP
Mn ≥0.50%
0.50–0.65
3SP
Mn ≥0.60%
0.60–0.65
5SP
Mn ≥0.50%
0.50–0.80
5SP
Mn ≥0.60%
0.60–0.80
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: Steel slab 250 × 1500 × 6000 mm
Reference dimensions: 250 × 1500 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 17662.5 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 250 × 1500 × 6000 mm
Steel Slab 250 × 1500 × 6000 mm Price by Grade: 3SP, 5SP, St37, St44, St52
The values below come from this page's reference tables and are not guaranteed; state the standard and grade when you ask for a price.
3SP / Ст3сп (GOST 380-2005): C 0.14–0.22, Mn 0.40–0.65, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.65; Mn 0.60 %: 0.60–0.65. State tonnage and the receiving city or port. Quotations are available for Qatar.
Buy Steel Slab 250 × 1500 × 6000 mm 5SP / Ст5сп
Reference values for 5SP / Ст5сп (GOST 380-2005): C 0.28–0.37, Mn 0.50–0.80, Si 0.15–0.30, P 0.040 max, S 0.050 max; buyer minimum: Mn 0.50 %: 0.50–0.80; Mn 0.60 %: 0.60–0.80. Include stacking and loading limits. It can be quoted for Kuwait buyers.
Steel Slab 250 × 1500 × 6000 mm St37, St44, St52 Price per Ton
St37, St44, St52: St37-2: C 0.17 max, P 0.050 max, S 0.050 max; St44-2: C 0.21 max, P 0.050 max, S 0.050 max; St52-3: C 0.20 max, Mn 1.60 max, Si 0.55 max, P 0.040 max, S 0.040 max. Name the standard and edition in the enquiry. Enquiries from Armenia are quoted on a stated delivery basis.
Choosing this specification
For 250 × 1500 × 6000 mm, agree the dimension order and whether the material is supplied as coil or cut lengths. Check usable width, cutting layout and flatness before comparing yield; nominal geometry does not include trimming or process losses. At nominal geometry and 7850 kg/m³ steel density, the reference is 17662.500 kg per piece. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 200 × 2000 × 6000 mm, the nominal geometric reference is 6.2% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.
Grades, standards and inspection requirements for this product: Steel slab
Steel Slab 250 × 1500 × 6000 mm 5SP Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies Steel Slab 250 × 1500 × 6000 mm to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with slab dimensions, piece weight and heat chemistry. See the Georgia market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Slab 250 × 1500 × 6000 mm St37 Price in Georgia
The Steel Slab 250 × 1500 × 6000 mm price in Georgia depends on grade, quantity and the delivery basis, as well as slab dimensions, piece weight and heat chemistry. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
Steel Slab 250 × 1500 × 6000 mm St44 Price in Tbilisi
For Steel Slab 250 × 1500 × 6000 mm delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
Steel Slab 250 × 1500 × 6000 mm St52 Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies Steel Slab 250 × 1500 × 6000 mm to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with slab dimensions, piece weight and heat chemistry. See the UAE market guide. Available grades: 3SP, 5SP, St37, St44 and St52.
Steel Slab 250 × 1500 × 6000 mm 3SP Price in UAE
The Steel Slab 250 × 1500 × 6000 mm price in the UAE depends on grade, quantity and the delivery basis, as well as slab dimensions, piece weight and heat chemistry. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
Steel Slab 250 × 1500 × 6000 mm 5SP Price in Dubai
For Steel Slab 250 × 1500 × 6000 mm delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy Steel Slab 250 × 1500 × 6000 mm: Price and Quotation by Destination
Steel Slab 250 × 1500 × 6000 mm weighs 17662.500 kg per piece on the page reference. Send grade, tonnage and piece count, and name the city or port you want the price for.
Steel Slab 250 × 1500 × 6000 mm St44 Supplier and Price for Qatar and Doha
Qatar quotations state the delivery basis and port handover. See the Qatar destination guide. Send tonnage, grade and the delivery point for Steel Slab 250 × 1500 × 6000 mm.
Steel Slab 250 × 1500 × 6000 mm Price in Doha
For Doha the delivery basis and required paperwork are stated with the price. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Steel Slab 250 × 1500 × 6000 mm Price via Hamad Port
Hamad Port handover is the stated basis for port-based offers. Ask for a port-based Steel Slab 250 × 1500 × 6000 mm basis next to a delivered one.
Steel Slab 250 × 1500 × 6000 mm St52 Supplier and Price for Oman and Muscat
Omani quotations name the discharge port and the terms. See Oman. Name the grade and tonnage for Steel Slab 250 × 1500 × 6000 mm in your request.
Request Steel Slab 250 × 1500 × 6000 mm Offer for Muscat
Muscat offers state the discharge port and terms before the price. Send the receiving address with your Steel Slab 250 × 1500 × 6000 mm tonnage.
Request Steel Slab 250 × 1500 × 6000 mm via Sohar
A Sohar offer names the terminal basis and the discharge scope. Ask for a port-based Steel Slab 250 × 1500 × 6000 mm basis next to a delivered one.
Steel Slab 250 × 1500 × 6000 mm St37 Supplier and Price for Kuwait and Kuwait City
Kuwait quotations name the delivery basis and discharge scope. See the Kuwait destination guide. Name the grade and tonnage for Steel Slab 250 × 1500 × 6000 mm in your request.
Steel Slab 250 × 1500 × 6000 mm Quotation for Kuwait City
For Kuwait City the delivery basis and unloading limits are in the offer. Send the receiving address with your Steel Slab 250 × 1500 × 6000 mm tonnage.
Buy Steel Slab 250 × 1500 × 6000 mm via Shuwaikh Port
Port handover and discharge scope at Shuwaikh are shown in the offer. Name the terminal and discharge terms in your Steel Slab 250 × 1500 × 6000 mm request.
Buy Steel Slab 250 × 1500 × 6000 mm for Georgia
Our Tbilisi head office handles Georgian enquiries. See the Georgia destination guide. Name the grade and tonnage for Steel Slab 250 × 1500 × 6000 mm in your request.
Buy Steel Slab 250 × 1500 × 6000 mm in Tbilisi
Tbilisi enquiries go to our head office, so dimensions, stacking and loading can be agreed directly. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Steel Slab 250 × 1500 × 6000 mm Price in Kutaisi
Kutaisi offers separate the price from the road freight. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Request Steel Slab 250 × 1500 × 6000 mm via Batumi
Batumi can serve as the sea entry, with discharge terms written next to the price. Ask for a port-based Steel Slab 250 × 1500 × 6000 mm basis next to a delivered one.
Buy Steel Slab 250 × 1500 × 6000 mm via Poti Port
A Poti-based price names the terminal and the discharge terms. Ask for a port-based Steel Slab 250 × 1500 × 6000 mm basis next to a delivered one.
Steel Slab 250 × 1500 × 6000 mm 3SP Supplier and Price for Armenia and Yerevan
Offers for Armenia show the inland leg separately. See Armenia. Send tonnage, grade and the delivery point for Steel Slab 250 × 1500 × 6000 mm.
Steel Slab 250 × 1500 × 6000 mm Price in Yerevan
For Yerevan, border costs and responsibility are shown apart from the price. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Steel Slab 250 × 1500 × 6000 mm 5SP Supplier and Price for Azerbaijan and Baku
Offers state the handover point and the customs scope. See the Azerbaijan destination guide. Send tonnage, grade and the delivery point for Steel Slab 250 × 1500 × 6000 mm.
Request Steel Slab 250 × 1500 × 6000 mm Offer for Baku
Baku offers fix the handover point and customs scope before the price. Send the receiving address with your Steel Slab 250 × 1500 × 6000 mm tonnage.
Steel Slab 250 × 1500 × 6000 mm St37 Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Send tonnage, grade and the delivery point for Steel Slab 250 × 1500 × 6000 mm.
Steel Slab 250 × 1500 × 6000 mm Quotation for Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Send the receiving address with your Steel Slab 250 × 1500 × 6000 mm tonnage.
Buy Steel Slab 250 × 1500 × 6000 mm in Bukhara
Bukhara offers state the inland distance and transit steps first. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Steel Slab 250 × 1500 × 6000 mm 5SP Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Name the grade and tonnage for Steel Slab 250 × 1500 × 6000 mm in your request.
Buy Steel Slab 250 × 1500 × 6000 mm in Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Request Steel Slab 250 × 1500 × 6000 mm via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Name the terminal and discharge terms in your Steel Slab 250 × 1500 × 6000 mm request.
Steel Slab 250 × 1500 × 6000 mm Price in UAE
UAE offers can be port-based or delivered by road. See the UAE. Name the grade and tonnage for Steel Slab 250 × 1500 × 6000 mm in your request.
Steel Slab 250 × 1500 × 6000 mm Price in Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Name the unloading equipment when you ask for the Steel Slab 250 × 1500 × 6000 mm price.
Request Steel Slab 250 × 1500 × 6000 mm Offer for Sharjah
Sharjah uses the same specification, with the trucking scope stated. Send the receiving address with your Steel Slab 250 × 1500 × 6000 mm tonnage.
Steel Slab 250 × 1500 × 6000 mm Price via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Ask for a port-based Steel Slab 250 × 1500 × 6000 mm basis next to a delivered one.
Buying Steel slab 250 × 1500 × 6000 mm and requesting a price
The price for Steel slab 250 × 1500 × 6000 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Steel slab 250 × 1500 × 6000 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Steel slab 250 × 1500 × 6000 mm
Include Steel slab 250 × 1500 × 6000 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Specification enquiries for Steel slab 250 × 1500 × 6000 mm
Steel slab 250 × 1500 × 6000 mm Chemical analysis
For Steel slab 250 × 1500 × 6000 mm Chemical analysis, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
