Review IPE steel beams for the IPE 400 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
IPE steel beams 400: Quick reference
IPE steel beams 400
Parameter
Value
Size / form
IPE 400
Height
400 mm
Width
180 mm
Web thickness
8.6 mm
Flange thickness
13.5 mm
Mass
66.300 kg/m
6 m calculated mass
397.80 kg
12 m calculated mass
795.60 kg
Dimensional / material references
EN 10365 / EN 10034 / EN 10279; GOST 8240 (UE); EN 10025-2
Grade / material
S235JR / S275JR / S355J2
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
IPE 400 has an actual section height of 400 mm, flange width 180 mm, web thickness 8.6 mm and flange thickness 13.5 mm. Reference mass is approximately 66.3 kg/m; calculated weights are 397.8 kg for a 6 m length and 795.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. IPE 400
Review IPE steel beams for the IPE 400 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Use the exact series and section table: EN 10365 dimensions, EN 10034 I/H tolerances or EN 10279 channel tolerances; a UE/GOST 8240 section is not automatically UPN. Material references below are EN 10025-2, with the actual web/flange thickness band where known. The hub compares 3 < t ≤ 63 mm bands. Tensile/yield values do not establish member capacity. Elongation, orientation, impact specimen and acceptance conditions require the complete order specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S275JR
3 < t ≤ 16 mm
≥275
410–560
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S275JR
3 < t ≤ 16 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
Size specifications: IPE steel beams 400
IPE 400 has an actual section height of 400 mm, flange width 180 mm, web thickness 8.6 mm and flange thickness 13.5 mm. Reference mass is approximately 66.3 kg/m; calculated weights are 397.8 kg for a 6 m length and 795.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. IPE 400
IPE 400 Beam Price by Grade: S235JR, S275JR, S355J2
The values below come from this page's reference tables and are not guaranteed; state the full standard designation and edition when you ask for a price.
IPE 400 Beam S235JR Price per Ton
S235JR limits C 0.17 max and Mn 1.40 max up to 16 mm thickness with a 235 MPa minimum yield, with P and S at 0.035 max and 27 J impact at +20°C. State tonnage and the receiving city or port. Enquiries from Uzbekistan are quoted on a stated delivery basis.
Request IPE 400 Beam S275JR Quotation
S275JR (C 0.21 max, Mn 1.50 max, 275 MPa minimum yield up to 16 mm) is the step up from S235JR when the design asks for more strength. Include bundle and loading limits. Quotations are available for UAE.
Buy IPE 400 Beam S355J2
S355J2 holds a 355 MPa minimum yield up to 16 mm with tighter P and S at 0.025 max (C 0.20 max, Mn 1.60 max, Si 0.55 max) and 27 J at −20°C. Name the standard and edition in the enquiry. It can be quoted for Oman buyers.
IPE 400 Beam St37, St44, St52 Price per Ton
Old drawings still ask for St37-2 / 1.0037 (C 0.17 max, P and S 0.050 max), St44-2 / 1.0044 (C 0.21 max) or St52-3 / 1.0570 (C 0.20 max, Mn 1.60 max, Si 0.55 max). Send tonnage and bar length for a price. Enquiries from Georgia are quoted on a stated delivery basis.
Choosing this specification
For IPE 400, verify section depth, flange width and connection clearances using the specified series table. Compare the required section properties and grade with the design; a neighbouring designation is not an automatic substitute.
Grades, standards and inspection requirements for this product: IPE steel beams
IPE 400 Beam S275JR Supplier in Georgia and Tbilisi
EMRA Steel is headquartered in Tbilisi and supplies IPE 400 Beam to buyers across Georgia. Offers cover delivery to Tbilisi, Rustavi and Kutaisi, or a port handover at Poti or Batumi. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the Georgia market guide. Available grades: S235JR, S275JR and S355J2.
IPE 400 Beam S355J2 Price in Georgia
The IPE 400 Beam price in Georgia depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Poti or Batumi port price and a delivered price to Rustavi or Kutaisi cover different transport scopes, so compare offers on the same basis.
IPE 400 Beam S235JR Price in Tbilisi
For IPE 400 Beam delivered to Tbilisi, the quotation names the receiving address, the inland leg from Poti or Batumi and the unloading equipment on site. Request a quotation with grade, tonnage and your Tbilisi address.
IPE 400 Beam S275JR Supplier in UAE and Dubai
EMRA Steel has a registered office in Dubai and supplies IPE 400 Beam to buyers across the UAE. Offers cover delivery to Dubai, Sharjah and Abu Dhabi, or a port handover at Jebel Ali or Khalifa Port. State grade and tonnage with your enquiry, together with bar length, bundle weight and lifting limits. See the UAE market guide. Available grades: S235JR, S275JR and S355J2.
IPE 400 Beam S355J2 Price in UAE
The IPE 400 Beam price in the UAE depends on grade, quantity and the delivery basis, as well as bar length, bundle weight and lifting limits. A Jebel Ali or Khalifa Port price and a delivered price to Sharjah or Abu Dhabi cover different transport scopes, so compare offers on the same basis.
IPE 400 Beam S235JR Price in Dubai
For IPE 400 Beam delivered in Dubai, the quotation names the site or warehouse address, the trucking scope from Jebel Ali and the unloading equipment on site. Request a quotation with grade, tonnage and your Dubai address.
Buy IPE 400 Beam: Price and Quotation by Destination
IPE 400 beam weighs 66.300 kg/m; a 12 m bar is 795.60 kg on that basis. Send grade, tonnage and bar length, and name the city or port you want the price for.
IPE 400 Beam S355J2 Supplier and Price for Uzbekistan and Tashkent
Uzbek buyers receive offers with the transit route stated. See Uzbekistan. Name the grade and tonnage for IPE 400 Beam in your request.
IPE 400 Beam Price in Tashkent
The rail or road leg to Tashkent is shown separately from the steel price. Name the unloading equipment when you ask for the IPE 400 Beam price.
Request IPE 400 Beam Offer for Bukhara
Bukhara offers state the inland distance and transit steps first. Send the receiving address with your IPE 400 Beam tonnage.
IPE 400 Beam S235JR Supplier and Price for Turkmenistan and Ashgabat
Offers state a clear handover point. See the Turkmenistan destination guide. Name the grade and tonnage for IPE 400 Beam in your request.
Request IPE 400 Beam Offer for Ashgabat
Ashgabat can be priced as a delivered offer from a stated receiving point. Send the receiving address with your IPE 400 Beam tonnage.
IPE 400 Beam Price via Turkmenbashi
A Turkmenbashi offer names the port basis and the onward leg. Ask for a port-based IPE 400 Beam basis next to a delivered one.
IPE 400 Beam for UAE: Price and Offer
UAE offers can be port-based or delivered by road. See the UAE. Send tonnage, grade and the delivery point for IPE 400 Beam.
IPE 400 Beam Quotation for Dubai
Our Dubai office can discuss the specification before a Dubai price is issued. Send the receiving address with your IPE 400 Beam tonnage.
Buy IPE 400 Beam in Sharjah
Sharjah uses the same specification, with the trucking scope stated. Name the unloading equipment when you ask for the IPE 400 Beam price.
Buy IPE 400 Beam via Jebel Ali
A Jebel Ali price names the terminal basis and the discharge scope. Name the terminal and discharge terms in your IPE 400 Beam request.
IPE 400 Beam S235JR Supplier and Price for Qatar and Doha
Offers for Qatar depend on the documents the buyer lists. See Qatar. Send tonnage, grade and the delivery point for IPE 400 Beam.
Buy IPE 400 Beam in Doha
Doha offers depend on the documents the buyer lists. Name the unloading equipment when you ask for the IPE 400 Beam price.
Buy IPE 400 Beam via Hamad Port
A Hamad Port price separates port charges from the steel price. Name the terminal and discharge terms in your IPE 400 Beam request.
IPE 400 Beam S275JR Supplier and Price for Oman and Muscat
Offers for Oman can be port-based at Sohar or delivered to Muscat. See the Oman destination guide. Send tonnage, grade and the delivery point for IPE 400 Beam.
IPE 400 Beam Price in Muscat
For Muscat the delivery basis comes first in the quotation. Name the unloading equipment when you ask for the IPE 400 Beam price.
IPE 400 Beam Price via Sohar
Sohar cargo is quoted with port handover. Ask for a port-based IPE 400 Beam basis next to a delivered one.
IPE 400 Beam S275JR Supplier and Price for Kuwait and Kuwait City
Offers for Kuwait state the port handover and handling limits. See Kuwait. Name the grade and tonnage for IPE 400 Beam in your request.
Request IPE 400 Beam Offer for Kuwait City
Kuwait City offers state the yard handling limits for long bars. Send the receiving address with your IPE 400 Beam tonnage.
Request IPE 400 Beam via Shuwaikh Port
A Shuwaikh Port price names the handover point and discharge terms. Ask for a port-based IPE 400 Beam basis next to a delivered one.
IPE 400 Beam for Georgia: Price and Offer
Black Sea ports and inland cities can both be quoted. See Georgia. Name the grade and tonnage for IPE 400 Beam in your request.
IPE 400 Beam Quotation for Tbilisi
Delivery to Tbilisi is quoted against the unloading equipment and truck access at your site. Send the receiving address with your IPE 400 Beam tonnage.
Buy IPE 400 Beam in Kutaisi
For Kutaisi the inland leg from the port or border is shown as its own line. Name the unloading equipment when you ask for the IPE 400 Beam price.
IPE 400 Beam Price via Batumi
A Batumi-based offer names the port basis and who handles discharge of long bars. Name the terminal and discharge terms in your IPE 400 Beam request.
Request IPE 400 Beam via Poti Port
Poti is the second Black Sea option; the offer says which port the price uses. Ask for a port-based IPE 400 Beam basis next to a delivered one.
IPE 400 Beam S355J2 Supplier and Price for Armenia and Yerevan
Armenia has no sea port, so quotations define the inland route and who handles border formalities. See the Armenia destination guide. Name the grade and tonnage for IPE 400 Beam in your request.
Buy IPE 400 Beam in Yerevan
Yerevan deliveries are inland, so the offer defines the route and border steps. Name the unloading equipment when you ask for the IPE 400 Beam price.
IPE 400 Beam S275JR Supplier and Price for Azerbaijan and Baku
The Azerbaijan quotation names who handles customs. See Azerbaijan. Send tonnage, grade and the delivery point for IPE 400 Beam.
IPE 400 Beam Price in Baku
A Baku quotation can use a handover near the city or delivery to your site. Name the unloading equipment when you ask for the IPE 400 Beam price.
Buying IPE steel beams 400 and requesting a price
The price for IPE steel beams 400 depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for IPE steel beams 400, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for IPE steel beams 400
Include IPE steel beams 400, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for IPE steel beams 400
IPE steel beams 400 S235JR
For IPE steel beams 400 S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
IPE steel beams 400 S275JR
For IPE steel beams 400 S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
IPE steel beams 400 S355J2
For IPE steel beams 400 S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
