Review IPE steel beams for the IPE 450 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
IPE 450 has an actual section height of 450 mm, flange width 190 mm, web thickness 9.4 mm and flange thickness 14.6 mm. Reference mass is approximately 77.6 kg/m; calculated weights are 465.6 kg for a 6 m length and 931.2 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. IPE steel beams IPE 450
IPE steel beams IPE 450 Technical and buying guide
EMRA Steel
Review IPE steel beams for the IPE 450 specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Read more
Size specifications: IPE steel beams IPE 450
IPE 450 has an actual section height of 450 mm, flange width 190 mm, web thickness 9.4 mm and flange thickness 14.6 mm. Reference mass is approximately 77.6 kg/m; calculated weights are 465.6 kg for a 6 m length and 931.2 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. IPE steel beams IPE 450
Specification and dimensions
I-beams: exact series and designation such as IPE, plus nominal height and required length. Where ordering by a drawing, provide flange width, web thickness and flange thickness. Do not treat IPE, IPN or a modified beam as equivalent solely by nominal height.
Grades and applicable standards
Dimensions: EN 10365; tolerances on shape and dimensions: EN 10034. Specify the full material grade separately, for example S235JR, S275JR or S355J2 to EN 10025-2, together with the required inspection documents. HEA and HEB of the same nominal size have different actual dimensions, thicknesses and mass. The designation number is not always the actual section height. IPE, HEA and HEB are separate series; confirm the section table, required length, quantity and delivery destination with EMRA Steel.
Applications and project requirements
I-beams are used in structural framing and supporting members. Section selection must follow the design, including span, loads, connections and lateral restraint.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Buying IPE steel beams IPE 450 and requesting a price
The price for IPE steel beams IPE 450 depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for IPE steel beams IPE 450, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for IPE steel beams IPE 450
Include IPE steel beams IPE 450, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
